SOLICITATION NOTICE
A -- Yaskawa Motoman 6-Axis Robotics - RFQ Due 08/26
- Notice Date
- 8/20/2020 3:32:26 PM
- Notice Type
- Solicitation
- NAICS
- 333992
— Welding and Soldering Equipment Manufacturing
- Contracting Office
- W6QK ACC-PICA PICATINNY ARSENAL NJ 07806-5000 USA
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-20-0086
- Response Due
- 8/26/2020 1:00:00 PM
- Archive Date
- 09/10/2020
- Point of Contact
- Ariel A. Dillon
- E-Mail Address
-
ariel.a.dillon.civ@mail.mil
(ariel.a.dillon.civ@mail.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Please see attached Request for Quote for the Motoman 6-axis Robotic Manufacturing Cell. Please note that all of Section J Attachments to the RFQ are included in this posting. It is requested that a quote is be returned by 4 PM est on 26 August 2020. Please see below some questions and answers regarding the RFQ: 1.���You indicate 3 additional external motors. Are these motors for the 3 Axis robot positioner?� Answer:�We require a minimum of three (3) input and three (3) out controls for external devices/machines/peripherals. 2.��You mention a Schunk End Effector package.� Can you let us know what the tooling will be handling?� Size, weight, configuration etc.? Answer:�The contractor shall deliver a Schunk End Effector Package that includes standard tools for various operation. (i.e. different operations need different shapes.) 3.��On the 3 Axis Robot positioner.� Are you moving the 6-axis robot arm with this?� If so, I assume this is an overhead gantry type configuration.� Please confirm. 6 axis robot is on gantry Answer:�Yes.� 6- axis robot with overhead configuration. 4.�Do you have any tolerances or specification requirement for the Renishaw� CMM package? Answer:�No just standard tolerances tables will be bolted too floor. 5.��The application included additive manufacturing.� Is this a welding additive system? Welding is an additive but is not a standard IE settings for PLA.� If so, what welding system are you using? Answer:�Not using any welding machine only part move printer to printer or finish, place or rotate for inspection or completion.� 6.��The statement of work appears to be in reference to an existing layout, could you please provide that for us? Answer:Space dimensions that gantry must fit in:� 23' x 25' x 16.5' (W x L X H) 7.���We manufacture a few 2-axis positioners with the requested payload.� Please see below if either one of these would work? Answer: I don't see the alternatives, but 6-axis robotic arm is required. 8. In 4.2.2 of the requirements in the SOW, do you mean ""quantity"", not ""quality?""� ���������Answer:���� Yes Quantity. �9. What size Motoman external motors are required? �������������Answer: One tilt turn turntable 500 lbs limit �10. Can we receive more details on the ATI Tool Changer Package and Schunk End Effector Packages?� ������������� Answer:Schunk tools PGN-plus-p 40-1,PGNPLUS 64-1-AS-P,PGN-PLUS-P50-1,DPZ-PLUS50-1AS,DPZ-PLUS80-2-AS,PZH-PLUS20,PZN-PLUS64-1-AS-P,GSM-P32-AS-E-180,GSM-P64-AS-E-180, ATI TSS TO support 9 tools ex post module, horizontal module, verical toolings interface plate, mounting module assembly, proximity sensors, tooling interface plate assembly ������������� 11. What are the required dimensions of the Ultra-flat heavy duty steel table? ���������Answer:�� 34in X 48in X 30in ������������� 12.What is the size of the cell to help calculate the required safety fencing� ��Answer:37 linear feet of fence and 2 doors for room size 23ft x25ft plus.� Once door is for personnel to enter.� One door should be 8 foot roling door for equipment to enter. 13.�Could you please tell me if this is a new requirement, or if there is a current or previous contractor who has performed similar services? If available, can you please send along the incumbent contract or task order number? Answer: This is a new requirment.� Please review attached notice for all vendors, that the Government intends to include the provision FAR 52.204-21 and the clause at FAR 52.204-25 in all contracts, task orders, delivery orders. The purpose of the letter is to� implement the Section 889(a)(1)(B) Prohibition on Contracting with Entities Using Certain Telecommunications and Video Surveillance Services or Equipment Clauses.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/de69329747424f78b9c51a47261a64dd/view)
- Place of Performance
- Address: Picatinny Arsenal, NJ 07806, USA
- Zip Code: 07806
- Country: USA
- Zip Code: 07806
- Record
- SN05766709-F 20200822/200820230148 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |