SOURCES SOUGHT
J -- USCGC MAPLE (WLB 207) FY21 DOCKSIDE (DS) Availability
- Notice Date
- 8/18/2020 5:52:03 AM
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- F2019045110
- Response Due
- 9/4/2020 11:00:00 AM
- Archive Date
- 12/31/2020
- Point of Contact
- Patrick D. Brown, Phone: 7576284588, Sandra A. Martinez, Phone: 7576284591, Fax: 7576284628
- E-Mail Address
-
Patrick.D.Brown@uscg.mil, Sandra.A.Martinez@uscg.mil
(Patrick.D.Brown@uscg.mil, Sandra.A.Martinez@uscg.mil)
- Description
- Sources Sought Notice Number: �F2019045110 Title: DOCKSIDE-REPAIRS � United States Coast Guard Cutter (USCGC) MAPLE (WLB 207) FY21 DOCKSIDE (DS) Availability Notice Type: Sources Sought The U.S. Coast Guard is looking for sources which would be interested in performing dockside repairs for Coast Guard Cutter MAPLE (WLB 207) DS The performance period of this upcoming dockside is 1 April 2021 to 29 May 2021. It is anticipated requests for quotes will be issued approximately 2 November 2020 and the contract would be awarded around 31 January 2021. USCGC MAPLE (WLB 207) is an oceangoing 225' buoy tender cutter currently home ported in Atlantic Beach, NC. �There are approximately 33 work items in the requirement and the sampling of work items (tentative list) to be performed is listed as follows: WORK ITEM 1: Tanks (Potable Water), Clean and Inspect WORK ITEM 2: Hydraulically Operated Cargo Hatch, Inspect and Service WORK ITEM 3: Vent Ducts (Engine and Motor Room All), Commercial Cleaning WORK ITEM 4: Vent Ducts (Galley and Pantry Room All), Commercial Cleaning WORK ITEM 5: Vent Ducts (Laundry Exhaust), Commercial Cleaning WORK ITEM 6: Vent Ducts (All Other), Commercial Cleaning WORK ITEM 7: Potable Water Pneumatic Tank(s), Clean and Inspect WORK ITEM 8: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift WORK ITEM 9: Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test WORK ITEM 10: Hydraulic Chain Stoppers, Inspect and Service WORK ITEM 11: Cross deck Winches, Inspect and Service WORK ITEM 12: Hydraulic Inhaul Winch, Inspect and Service WORK ITEM 13: Mechanical Chain Stoppers, Inspect and Service WORK ITEM 14: Warping Capstan, Inspect and Service WORK ITEM 15: Hull Fittings (Mooring and Towing), Inspect and Test WORK ITEM 16: Single Point Davit, Inspect and Service WORK ITEM 17: Twin Pivot Arm Davit, Inspect and Service WORK ITEM 18: Commissary Hoist, Inspect and Service WORK ITEM 19: Oil Content Meter, Calibrate WORK ITEM 20: Grey Water Holding Tank(s), Clean and Inspect WORK ITEM 21: Sewage Holding Tank(s), Clean and Inspect WORK ITEM 22: Sewage Piping, Clean and Flush WORK ITEM 23: Tanks (Potable Water), Preserve �100%� WORK ITEM 24: Tanks (Potable Water), Preserve, Partial, WORK ITEM 25: Temporary Services, Provide - Cutter WORK ITEM 26: Temporary Messing, Provide WORK ITEM 27: Galley, Renew WORK ITEM 28: Cargo Hatch Repair WORK ITEM 29: Weather Tight Doors, Renew WORK ITEM 30: Watertight Hatch (External DC Deck and Below), Renew WORK ITEM 31: Pad Eye Installation WORK ITEM 32: Compartment Insulation Renew WORK ITEM 33: Anchor Pocket Repair GEOGRAPHICAL RESTRICTION MAY OR MAY NOT BE RESTRICTED Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc�.� Replies should be sent by 4 September 2020, 2:00 pm Eastern Standard Time to:� Patrick.D.Brown@uscg.mil Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted.� After the determination a combined synopsis/solicitation will be posted on this website (https://www.Beta.Sam.gov/). The NAICS Code is 336611. The small business size standard is less than 1250 employees. Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, ""Notice of HUBZone Set-Aside or Sole Source Award"" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. �Contractors are also reminded that in the case of a Service-Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, ""Notice of Service-Disabled Veteran-Owned Small Business Set-Aside"" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other service disabled veteran owned small businesses. Additionally, regarding FAR 52.219-30 ""Notice of Set A-Side For Women-Owned Small Business Concerns�"": �A women-owned small business (WOSB) concern eligible under the WOSB Program, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. Primary Point of Contact: Patrick Brown, Patrick.D.Brown@uscg.mil Phone: (757) 628-4588/ (757) 620-7112
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/259d329c18924dccb898dacf342836f8/view)
- Place of Performance
- Address: Atlantic Beach, NC 28512, USA
- Zip Code: 28512
- Country: USA
- Zip Code: 28512
- Record
- SN05764218-F 20200820/200818230209 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |