SPECIAL NOTICE
19 -- TEAM SUB Small Business Sustainment Technology Showcase
- Notice Date
- 8/18/2020 7:38:30 AM
- Notice Type
- Special Notice
- NAICS
- 325510
— Paint and Coating Manufacturing
- Contracting Office
- NAVSEA HQ WASHINGTON NAVY YARD DC 20376-5000 USA
- ZIP Code
- 20376-5000
- Solicitation Number
- N0002420SN051
- Response Due
- 8/21/2020 10:00:00 AM
- Archive Date
- 09/05/2020
- Point of Contact
- Angelle Dent-King, Phone: 2027811401, Kimberly Vallone, Phone: 2027811687
- E-Mail Address
-
angelle.l.dent-king3.ctr@navy.mil, navsea_small_biz.fct@navy.mil
(angelle.l.dent-king3.ctr@navy.mil, navsea_small_biz.fct@navy.mil)
- Description
- TEAM SUB Small Business Sustainment Technology Showcase � Solicitation Number: TEAMSUB00K_Industry_Day_2020 Agency:� Department of the Navy Office:� Naval Sea Systems Command (NAVSEA) Location:� Live - Virtual Event Notice Type:� ����������� Special Notice Posted Date;��� ����������� August 18, 2020 Response Date:���������� August 21, 2020, 1:00p.m. Eastern Archiving Policy:������� Automatic on specified date Archiving Date:��������� August 18, 2020 Original Set-Aside:���� N/A Set Aside:������������������ N/A Classification Code:�� J-Maintenance, repair & rebuilding of equipment NAICS Code:������������ See Below Synopsis:�������� TEAM SUBMARINE and NAVSEA Small Business Office will be co-sponsoring a Small Business Sustainment Technology Showcase Virtual Event on 16-17 September 2020.� This event will focus on the undersea community and our sustainment challenges and technology needs.� The event also serves as an introduction to innovative technologies to assist the Program Executive Offices (PEOs) with a broad spectrum and high level of shipyard modernization efforts.�� Eligibility: This event is open only to small businesses as described in the Small Business Administration (SBA) Table of Size Standards for the North American Industry Classification System (NAICS) code(s) show in the table below.� Due to the extreme space limitations at this event, please review the list of desired technologies.�� If your organization or company is interested in attending this event and your capability falls within one or more of the technology categories, please submit a capability statement for consideration.� ���� The capability statement should include any innovative technology or process, concept, end item, or system for demonstration.� Also include your entity�s NAICS and socio-economic status.� Send submissions to the Primary and Secondary Points of Contact, as identified within this notice, via email, no later than 1300 Eastern Standard Time on Friday, 21 August 2020.� Organization�s/company�s selected to participate will be notified via email during the week of 25 August 2020. NAICS Code Description 541712 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology) 334511 Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing 325510 Industrial Product Finishes and Coatings 541511 Computer Program or Software Development, Custom Computer Software Design Analysis� Specific Technologies/Innovations sought: -Additive Manufacturing -Electronics Obsolescence -Test Set Improvement and Obsolescence -Obsolescence Solution Development (Process and Requirements) -Software Based Reverse Engineering -Coatings (Engine housings, fuel tanks, etc.) -Metal Treatments for Defense Materials -Cable Harness Supportability -Circuit Card Supportability -Computer System and Micro-Electronic Obsolescence -3D System(s) Mapping -Electronic Sensing of Atmospheric Contaminants -Intelligent Assistant for 24/7 Distance Support -Non-Invasive Anti-Fouling Assessment -Composite Materials Replacement for Aging Hull/Mechanical/Electrical (HM&E) Items -Hull Treatment Maintenance and Repair -Gas Sensor for Early Battery (i.e. UUV) Fault Detection -Closed Loop CNC Tool Path Planning for the Additive Manufacture of Computer Geometries -Additive Manufacturing of High Quality Fasteners -Non-Destructive Test Methods for Inspection of Interior Surfaces and Complex Geometries -Ship Control and Data Distribution System; displays are currently not supportable nor repairable (obsolete) -Materials to Support Repair and Procurement (design and improvements) -Micro/Miniature Repair -Model Based Product Support -Depot Material Forecasting -Low Cost Data Format Conversion Capabilities -Reverse Engineering Capability -Data Architecture and Analysis Supporting Undersea Weapon Maintenance and Supply Chain Management -Propeller Reverse Engineering and Material Design -Supply System Organic Workload Cadence -Private Sector Manufacturing Best Practices and Analysis -Warfare Center Facility Support Improvements -Maintenance/ Tech Refresh Scheduling Analysis (to achieve minimum down time) -Modernization of Software Databases -Programmable Chip Applications -Obsolescence Based on Reliability -Obsolescence Management (forecasting HM&E, software, other system elements) -Predictive Reliability Based on Environmental Conditions -Design for Affordability (material pull-thru and/or extended life) -Property Management Efficiencies and Support -Modeling and Simulation of Manpower Planning (impacts of new construction) -Cybersecurity in the 2st Century -Counterfeit Material Recognition and Analysis -Technical Degree Recruitment and Detection -Modernization and Acceleration of Military Construction and Naval Facilities Development, Planning and Execution -Laser Ablation Technology Applications -Radio Frequency Identification (RFID) Solutions for Achieving High Inventory Accuracy -Submarine Rescue Fiber-optic Measurement for Launch and Recovery System Loads and Accelerations � DISCLAIMER: THIS SPECIAL NOTICE IS FOR INFORMATIONAL PURPOSES ONLY.� THIS IS NOT A REQUEST FOR PROPOSAL.� IT DOES NOT CONSTITUTE A SOLICTATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUCEMENT.� NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT.� ANY INFORAMTION SUBMITTED BY RESPONDENTS TO THIS NOTICE IS STRICTLY VOLUNTARY. Proprietary information and trade secrets, if any, must be clearly marked on all materials.� All information received that is marked Proprietary will be handled accordingly.� Please be advised that all submissions become Government property and will not be returned.� The Government shall not be held liable for any damages incurred if proprietary information is not properly identified. Contracting Office Address: 1333 Isaac Hull Avenue, SE Washington Navy Yard, DC 20376 United States Place of Performance: Washington Navy Yard, DC� 20376 United States Primary Point of Contact: Angelle Dent-King Acquisition Program Analyst Angelle.l.dent-king3@navy.mil Phone:� 202-781-1401 Secondary Point of Contact: Kimberly Vallone Deputy Director for Small Business Navsea_small_biz.fct@navy.mil Phone:� 202-781-1687 � ��
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/449c7eebb2fb48018b196572851352e4/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05762656-F 20200820/200818230158 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |