SPECIAL NOTICE
Y -- NOI-JOHNSON CONTROL -USACE New England District HQ, Hanscom AFB, MA
- Notice Date
- 8/12/2020 5:08:49 AM
- Notice Type
- Special Notice
- NAICS
- 236220
— Commercial and Institutional Building Construction
- Contracting Office
- W2SD ENDIST NEW ENGLAND CONCORD MA 01742-2751 USA
- ZIP Code
- 01742-2751
- Solicitation Number
- W912WJ20X0028
- Response Due
- 8/27/2020 11:00:00 AM
- Archive Date
- 09/11/2020
- Point of Contact
- Elizabeth K. Glasgow, Phone: 9783188671
- E-Mail Address
-
elizabeth.k.glasgow@usace.army.mil
(elizabeth.k.glasgow@usace.army.mil)
- Description
- Under the authority of FAR 6.302-1, the U.S. Army Corps of Engineers intends to require, on a sole source basis, a brand name requirement for the manufacturer Johnson Controls to supply a Network Automation Engine (NAE) device for the New England District Headquarters facility to be constructed on Hanscom Air Force Base (HAFB). The new facility involves the renovation of two existing buildings (Buildings 1107 and 1109) and the construction of an addition to join the two buildings into a new headquarters facility for the New England District. �The utility meters at the new facility must be connected to the existing base wide Utility Monitoring and Control System (UMCS) on the HAFB campus. This will allow Hanscom to monitor utility usage of each utility system and to bill New England District for their utility usage. The UMCS Front End on Hanscom Air Force Base (HAFB) is a Johnson Controls Metasys system. The base-wide UMCS allows Hanscom personnel to remotely monitor, manage, access, and control HVAC, utilities, and other building systems for each building on HAFB connected to the base-wide system. Due to the sheer size of HAFB�s UMCS across the Base, data from individual building systems is not allowed to be streamed directly to the Metasys server as this would quickly overwhelm the server and cause the system to become inoperable. The Metasys system handles this potential data �overload' by placing a small box called a Network Automation Engine in the building where the meter for utility system is located. The UMCS controls when each Network Automation Engine sends those data packets from the meters thereby preventing overload of the UMCS server. The intent of the sole source requirement is to provide a Network Automation Engine by Johnson Controls in both the new New England District Headquarters facility. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. It is a market research tool being used to determine the availability of other qualified sources that can meet the requirements identified above and inherent with the referenced Johnson Controls Network Automation Engine. The Government is not obligated to, and will not pay for any information received from potential sources as a result of this notice of intent. All responses received within 15 days of the posting of this notice of intent will be considered by the Government. A determination by the Government to require the brand name for the Johnson Controls system for the New England District Headquarters facility procurement based on this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purposes of determining whether to allow alternate system manufacturers. Submit any inquiries within 15 days of the posting of this notice of intent via email to: Elizabeth.K.Glasgow@usace.army.mil (list W912WJ20X0028 � Network Automation Engine in the subject line of the email).
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/65731da1ae364951b5637577ea5b88a3/view)
- Place of Performance
- Address: Bedford, MA, USA
- Country: USA
- Country: USA
- Record
- SN05754311-F 20200814/200812230141 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |