SOLICITATION NOTICE
51 -- 01-397-4892 CABINET, TOOL, MOBILE
- Notice Date
- 7/14/2020 7:46:26 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332216
— Saw Blade and Handtool Manufacturing
- Contracting Office
- GSA/FAS HEARTLAND ACQUISITION CENTE Kansas City MO 64108 USA
- ZIP Code
- 64108
- Solicitation Number
- QSHA-20-5140013974892
- Response Due
- 7/22/2020 10:00:00 AM
- Archive Date
- 08/06/2020
- Point of Contact
- Tabitha Smith, Phone: 8169267311
- E-Mail Address
-
tabitha.smith@gsa.gov
(tabitha.smith@gsa.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- 5140-01-397-4892��� UI: EA� �CABINET, TOOL, MOBILE QUANTITY: 80�TOTAL DESCRIPTION Brand Name or Equal Submissions: FAR Provisions 52.211-6, Brand Name or Equal Applies Type: cabinet, roller Number of drawers: 7 Casters: 4 (four) 5 inch Color: red Size: 29 inches wide, 20 inches deep, 35 inches high Features: drawer dividers Kennedy Manufacturing part number 297XR or equal. Offering on: Manufacturer's Name: ______________________________ Brand�� __________________________________________ Model or Part No. __________________________________ FAR Provisions 52.211-6, Brand Name or Equal Applies. In order for the government to make an ""or equal"" determination of the offered product(s), the Bidder/Vendor must furnish information that specifically addresses each characteristic within the item purchase description. The unit of issue, unit of measure, test methods and results, if required, must also be included. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6). ITEM MARKING Each item Shall Be Marked in a Permanent and Legible Manner with: 1) Manufacturer's Part Number 2) Manufacturer's Name or Identifying Symbol, and 3) Country of Origin Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN).� Requisition Number and TCN are found on the Purchase Order. PACKAGING One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. MARKING MARKING In general, unless otherwise specified by the contracting officer, marking of shipments shall be in accordance with the GSAM provision/ Clause 552.211-73, marking. In more detail: Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123. That is, unit, intermediate, and transport packages shall be marked directly on the side surface of the package or on a label affixed to the package, with the identification marking as specified in the standard. Transport packages shall also have, in addition to the identification marking, a shipping label that includes the purchase order, contract, or the requisition numbers; as applicable, including the consignor and consignee names (i.e. ship from/ to), gross weight, cube and piece number. Marking of supplies for deliveries to civilian activities, export locations, including commercial freight forwarders and third party logistics providers, and excluding freight entering the Defense Transportation System, shall be the same as deliveries to domestic locations except that the shipping label shall show on the same label, or another label affixed next to the shipping label, the ultimate consignee (i.e. Mark for AAC). Marking of supplies for deliveries to domestic military activities shall comply with the latest edition of Military Standard 129. That is, unit, intermediate, and exterior or shipping containers shall be marked directly on the side surfaces of the package or on a label affixed to the package, with the identification marking as specified in the standard. Exterior or shipping containers shall also have in addition to the identification marking, a Military Shipping Label (MSL) per the standard. Marking of supplies for deliveries to military activities, export locations, including forwarding and container consolidation points (CCPs) shall be the same as deliveries to domestic locations except that the MSL must also show the ultimate consignee (Mark for DoDAAC) and the Transportation Control Number (TCN). ""Latest version"" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's ""Assist"" Quicksearch web site: http://quicksearch.dla.mil/
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/b665d2ddbab04540970fa3d96dba7ec0/view)
- Place of Performance
- Address: Anniston, AL 36201, USA
- Zip Code: 36201
- Country: USA
- Zip Code: 36201
- Record
- SN05720741-F 20200716/200714230159 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |