SOLICITATION NOTICE
54 -- Portable Container Office Enclosure
- Notice Date
- 7/8/2020 4:14:23 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332311
— Prefabricated Metal Building and Component Manufacturing
- Contracting Office
- PORTSMOUTH NAVAL SHIPYARD GF PORTSMOUTH NH 03801-5000 USA
- ZIP Code
- 03801-5000
- Solicitation Number
- N3904020Q0138
- Response Due
- 7/17/2020 7:00:00 AM
- Archive Date
- 05/01/2021
- Point of Contact
- Danelle Quinn, Phone: 2074386588, Fax: 2074384193, Tana L Anderson, Phone: 2079940448, Fax: 2074384193
- E-Mail Address
-
danelle.quinn@navy.mil, tana.anderson@navy.mil
(danelle.quinn@navy.mil, tana.anderson@navy.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- **********Amendment 002********** See attached Amendment 002 PWS Revision for updates to the Performance Work Statement.� Quotes are due on 07/17/2020 at 10:00am. Please submit quoatations to:�Danelle Quinn, Contract Specialist, danelle.quinn@navy.mil **********End of Amendment 002 ********* **********Amendment 001********** The purpose of this amendment is to remove� and replace two items of information requested by the government to be included in quote submissions in response to the Combined Synopsis/Solicitation, N3904020Q0138. ������������� a. Technical acceptability will be based on the demonstrated ability to meet the technical requirement, including the delivery requirement. The vendor must demonstrate how it will meet the delivery requirement; a mere statement indicating the vendor will meet the government�s requirements will be deemed unacceptable. To ensure technical compliance with the requirements, vendor quotes shall include the following information. REMOVED Calculations/analysis - All calculations required for the design of the lifting pads shall be performed by a structural engineer and/or certified by a registered Professional Engineer and submit to the PNSY with the quote. Provide detailed drawings of design, installation and welding requirements for the modular building described in this specification.� All drawings shall be certified by a registered professional engineer. TO REPLACE Confirm Ability to provide calculations/analysis - All calculations required for the design of the lifting pads shall be performed by a structural engineer and/or certified by a registered Professional Engineer and submitted to the PNSY upon award. The quote submission must include confirmation that the vendor is able to provide the calculations and analysis post-award and the estimated timeline for the deliverable. Confirm Ability to provide detailed drawings of design, installation and welding requirements for the modular building described in this specification.� All drawings shall be certified by a registered professional engineer. The quote submission must include confirmation that the vendor is able to provide the detailed drawings post-award and the estimated timeline for the deliverable. Provide details of manufacturing process and/or all applicable construction methods proposed to meet PNS�s requirement as detailed in the Performance Work Statement. ������ b. Vendors are permitted to submit revised Technical and Price quotations to the extent necessary to address changes in this Amendment.� Vendors who decide not to submit revised quotations will inform the Government of that decision by the time and date set for receipt of the revised quotations.� If a Vendor submits a timely notification of its decision, the Government intends to consider the Vendor�s existing quotation in making the source selection decision.� Vendors who fail to comply with these instructions will be considered ineligible for contract award. ������ c. All additional terms and conditions of the combined synopsis/solicitation remain. ������ d. �Quotes are due by June 11, 2020 no later than 12:00pm. Please submit quotes to both individuals listed below: Danelle Quinn, Contract Specialist, danelle.quinn@navy.mil Tana Anderson, Contract Specialist, tana.anderson@navy.mil **********Amendment 001********** ******* End of Updates to Combined Synopsis/Solicitation ******** A combined synopsis/solicitation for a commercial requirement prepared in accordance with the format in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented by Part 13, is attached�with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number for this procurement is N3904020Q0138 and is a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2020-04, and Defense Federal Acquisition Regulation Supplement Change Notice (DPN) 20200123. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.� The North American Industry Classification System (NAICS) is 332311. The small Business Size Standard is 750 employees and this solicitation is Total Small Business Set-Aside. This requirement is for a firm fixed price contract. This is a commercial requirement for a 12'.0""W x 40'-0"" L x 8'.6"" H Portable Container Office Enclosure to be used as a portable building for specific projects at Portsmouth Naval Shipyard in Kittery, Maine. The expected delivery date is by 8/14/2020. Written quotes are required (oral offers will not be accepted). Quotes will be received by email only.� Send to: danelle.quinn@navy.mil� � The deadline for receipt of questions is�May 12, 2020 by 1:00pm EST.� Although every effort will be made, the Government makes no guarantee that questions received after the date above will be answered.�All questions shall be submitted via email to the point of contact listed for this solicitation.� Responses will be posted to the beta.SAM web page at�https://www.beta.SAM.gov.� Send to: danelle.quinn@navy.mil�� Attachment 1- Request for Quote�Sheet Attachment 2- Drawing Attachment 3- LIFTING AND HANDLING MANUAL, VIII-CH 4 DATE 08JUN2017
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/bf70f96f5c8f4d46a67618133440adb7/view)
- Place of Performance
- Address: Kittery, ME 03904, USA
- Zip Code: 03904
- Country: USA
- Zip Code: 03904
- Record
- SN05715073-F 20200710/200708230144 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |