SOLICITATION NOTICE
48 -- VALVE, GLOBE
- Notice Date
- 6/16/2020 4:36:56 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332911
— Industrial Valve Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M320RX007
- Response Due
- 6/30/2020 2:00:00 PM
- Archive Date
- 07/15/2020
- Point of Contact
- Rory O'Reilly614-692-1742
- E-Mail Address
-
Rory.OReilly@dla.mil
(Rory.OReilly@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- THIS IS AN INDEFINITE DELIVERY CONTRACT (IDC) SOLICITATION FOR A SINGLE NSN: 4820-00-483-0695 ITEM DESCRIPTION: VALVE, GLOBE MAXIMUM VALUE: $249,999.99. QTY ranges from�50 each to 3,100 each INSPECTION POINT: ORIGIN ACCEPTANCE POINT: ORIGIN FOB: ORIGIN DELIVERY DATE: 120 DAYS ADO OR BETTER OFFER FIRST DESTINATION TRANSPORTATION PROGRAM APPLIES AMC/AMSC = 1/G VALVE, GLOBE 1/2 INCH VALVE SIZE. IN-LINE STOP TYPE, CLASS A. A metal casting process was identified as a means to manufacture this item.�� Tooling is required to produce a casting.� For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. AN IDENTIFICATION PLATE SHALL BE SECURELY ATTACHED TO EACH VALVE SHOWING CID 882057031. IN ACCORDANCE WITH NAVAL SEA SYSTEMS COMMAND DRAWING, WITH THE FOLLOWING EXCEPTIONS: BUNA-N BONNET O-RING SHALL BE PACKED IN A BAG AND SECURELY ATTACHED TO EACH VALVE WITH INSTRUCTIONS ""FOR SERVICE BELOW 250 DEG. F ONLY AND FOR OIL APPLICATIONS"". EPR O-RING SHALL BE INSTALLED IN THE VALVE.UNION TAILPIECE ASSEMBLIES ARE NOT TO BE FURNISHED. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. Contractor shall enclose a signed hydrostatic test report with each valve supplied under contract. This information can be placed in each box or affixed to each box as a label. Information contained on the label/report shall certify that Hydrostatic testing has been performed and successfully met the requirements of the drawing or specification sited in the contract. CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 80064 4384536 REVISION NR N�� DTD 09/27/2016 PART PIECE NUMBER: 803-4384536-31A AF
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/d2a9c48087f94497a55415c5cd4f9caa/view)
- Record
- SN05692842-F 20200618/200616230208 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |