Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 10, 2020 SAM #6768
SOLICITATION NOTICE

66 -- Arc Melter with Chilled Water Vacuum Suction Casting

Notice Date

6/8/2020 7:37:02 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

334516 — Analytical Laboratory Instrument Manufacturing
 

Contracting Office

DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
 

ZIP Code

20899
 

Solicitation Number

1333ND20QNB640103
 

Response Due

6/22/2020 8:00:00 AM
 

Archive Date

07/07/2020
 

Point of Contact

Don Graham, Phone: 3019758567, Donald Graham, Phone: 3019758567
 

E-Mail Address

deg@NIST.GOV, donald.graham@nist.gov
(deg@NIST.GOV, donald.graham@nist.gov)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

AMENDMENT 005-The Combined Synopsis/Solicitation is amended to revise the following Requirement/Specifications, the submittal requirements and the evaluation. Revised Combined Synopsis/Solicitation dated 6/8/2020 supercedes previous document.� If the below revision does not change your submittal you can submit an email to the Contracting Specialist stating there is no change to your previous submittal and the previous submittal will be evaluated for award. If revision does change your submittal or you are submitting for the first time on this combined synopsis/solicitation then follow the submittal instructions contained below. REVISION FROM: For the purpose of the Statement of Requirements Section 4.6, Offerors shall submit one (1) as-cast ingot prepared by the water chilled vacuum suction casting mold to evaluate the cooling rate. ��������������� 1. The composition of ingot alloy shall be Fe - 0.25 Ni (by mass fraction). ��������������� 2. The rod dimension shall be 50 mm in diameter and 150 mm in length excluding a residual molten metal. TO: For the purpose of the Statement of Requirements Section 4.6, Offerors shall submit one (1) as-cast ingot prepared by the water chilled vacuum suction casting mold to evaluate the cooling rate. ����������������� 1. The composition of ingot alloy shall be Fe - 0.25 Ni (by mass fraction). ����������������� 2. The rod dimension shall be 5 mm in diameter and 150 mm in length excluding a residual molten� metal. AMENDMENT 004: The Combined Synopsis/Solicitation is amended to revise the Requirments/Specifications, the submittal requirements and the evaluation. (See attached revised Combined Synopsis/Soliciation) Revised Combined Synopsis/Solicitation dated 4/27/2020 supercedes previos documents. AMENDMENT 003:�This Combined Synopsis/Solicitation is amended to�make correction on page 9, REQUIRED SUBMISSIONS, item 4.b. Amendment 003 (see attached) of the Combined Synopsis/Solicitation supercedes the Amendment 002 version.� Amendment 003 also responds to technical questions submitted. See document titled Questions and responses 2/14/20. AMENDMENT 002: This Combined Synopsis/Solicitation is amended to incorporate Schematic 1 and 2. See attached Amendment 002. AMENDMENT 001: This Combined Synopsis/Solicitation is amended to add a deliver to name and contact information under the due date for quotation section (page 8). See attached Amendment 001. THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FEDERAL ACQUISITION REGULATION (FAR) SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE.� THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THIS SOLICITATION IS BEING ISSUED UNDER THE AUTHORITY OF FAR PART 13 SIMPLIFIED ACQUISITION PROCEDURES. This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2020-04 effective January 15, 2020. The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 with a small business size standard of 1,000 employees. Line Item 0001 is being procured as a 100% set aside for small business. Line Item 0002 is an optional line item and is being procured as Brand Name or equal, 100% set aside for small business. The non-manufacturer rule applies to this procurement. In accordance with the non-manufacturer rule, both the manufacturer and the distributor must be a small business. Any concern submitting a quotation in its own name, that proposes to furnish an end product it did not manufacturer (a �nonmanufacturer�), is a small business if it has no more than 500 employees. (see attached Combined Synopsis/Solicitation)
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/6e57e371e8724611abc04482684e2704/view)
 

Place of Performance

Address: Gaithersburg, MD 20899, USA

Zip Code: 20899

Country: USA
 

Record

SN05683630-F 20200610/200608230151 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |