SAMDaily.us | PRESOL | 29 | Pre-Cleaner Assembly 2940-01-408-7047

SAMDAILY.US - ISSUE OF JUNE 03, 2020 SAM #6761
SOLICITATION NOTICE

29 -- Pre-Cleaner Assembly 2940-01-408-7047

Notice Date: 6/1/2020 5:42:04 AM
Notice Type: Presolicitation
NAICS: 333618 — Other Engine Equipment Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
ZIP Code: 43218-3990
Solicitation Number: SPE7L320R0061
Response Due: 7/16/2020 12:00:00 PM
Archive Date: 07/31/2020
Point of Contact: Jarius Merriweather, Phone: 6146926567
E-Mail Address: jarius.merriweather@dla.mil
(jarius.merriweather@dla.mil)
Description: SPE7L320R0061 PR 0084616365 NSN(s):� 2940-01-408-7047 Item Description: Pre-Cleaner Assembly Quantity: 174 Unit of Issue:� EA Option: None Delivery Schedule:� 820 Days ADO Item is being bought in accordance with �� This requirement is Unrestricted and will be solicited per FAR part 15; DAG 5.207(d)(iv).� While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance as described in the solicitation. FOB and Inspection/Acceptance points as required per the solicitation. �� IAW BASIC DRAWING NR 19207 12388262 REVISION NR A DTD 12/10/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387305 REVISION NR DTD 01/27/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12287777 REVISION NR E DTD 09/07/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387269 REVISION NR D DTD 08/09/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344424 REVISION NR B DTD 09/08/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344177 REVISION NR A DTD 02/03/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344184 REVISION NR DTD 09/21/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12346099 REVISION NR DTD 09/21/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388262 REVISION NR DTD 02/08/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388261 REVISION NR DTD 01/18/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388251 REVISION NR E DTD 01/22/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388262 REVISION NR DTD 05/04/2016 PART PIECE NUMBER: The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about 06/16/2019. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the US by the Trade Agreements Act of 1979.� All offers shall be in the English language and in US dollars.� All interested suppliers may submit an offer.� Based on market research this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item.� However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government�s requirement with a commercial item with 15 days of this notice. �Users not having access to the Internet may contact the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA� 19111-5094.� Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP.� This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export.� Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad.� This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures.� Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.� In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration.� If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis.� Failure to comply timely with required information may result in lack of consideration for DLA solicitations.� It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence.� DLA will work diligently on validating vendor requests.� Vendors will be notified within 3 business days of when their requests were approved.� However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/c7f2183112094763bf5df6369c33c515/view)
Place of Performance: Address: Columbus, OH 43213, USA; Zip Code: 43213; Country: USA
Record: SN05675986-F 20200603/200601230145 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

29 -- Pre-Cleaner Assembly 2940-01-408-7047