SOLICITATION NOTICE
77 -- Band Instruments
- Notice Date
- 5/27/2020 6:32:54 PM
- Notice Type
- Solicitation
- NAICS
- 339992
— Musical Instrument Manufacturing
- Contracting Office
- COMMANDING OFFICER FPO AP 96379-5002 USA
- ZIP Code
- 96379-5002
- Solicitation Number
- M67400-20-Q-0064
- Response Due
- 6/9/2020 8:00:00 PM
- Archive Date
- 06/25/2020
- Point of Contact
- Ian Netzel, Phone: 3156454643
- E-Mail Address
-
ian.netzel@usmc.mil
(ian.netzel@usmc.mil)
- Description
- CLIN0001: Professional Piccolo Referenced MFR: Yamaha Referenced Part number: YPC-81 or equal Body shall be Grenadilla wood Bore shall be conical Head Joint shall be Grenadilla wood Keys shall be silver plated Shall have Split E Mechanism Case shall be included Qty: 0002 EA CLIN0002: Professional Model Bassoon Referenced MFR: Fox Referenced Part number: Model 601 or equal Finish shall be naturally cured oil varnish in light mahogany or ebony Shall have silver plated keys and trim Mechanism shall have 18% nickel silver key castings Shall have nickel silver hinges and machined parts Shall be Full German system with High D and E keys Shall have right hand whisper key lock. Shall have rollers on F, Ab, and Db Shall have metal tubes extending into the bore in the finger holes of the wing and boot joints All posts shall be set with epoxy All spring post shall be locked with screws Body shall be Flamed Yugoslavian Mountain Maple, with natural rubber linings in the wing and small bore of the boot joint Shall include deluxe round cornered case with case cover, neck strap, wooden crutch, silk swab, and seat strap Intonation shall include a tuning basis of A-440 Bocals shall be Numbers 2 and 3 *CVC* Bore Qty: 0001 EA CLIN0003: Professional Greenline Clarinet Referenced MFR: Buffet Crampon Referenced Part number: BC1131G-2-0 or equal Shall have Key of Bb Shall have composite blackwood body Shall have poly-cylindrical bore Shall have metal-crapped tenons Shall have adjustable thumb rest Shall have 19 key, 6 rings, Eb level, Low F correction key Keys shall be silver plated Springs shall be blue steel Case shall be included Qty: 0002 EA CLIN0004: Professional Soprano Saxophone Referenced MFR: Selmer Paris Referenced Part number: 51J or equal Acoustics shall be one-piece body style Neck shall be straight, non-detachable Range shall be Low Bb � High F# Construction shall have mini-ribs, Lacquered Brass Mechanism shall have compact key positioning - closer to the body and directly under the hand Front F Key shall have spatula Left-hand thumb rest shall be plastic Right-hand thumb rest shall be metal and adjustable Adjusting screws shall be included for high E & F, low B table key, G# key, F#/G# lug, F#/G# adjusting bar, low C#, low B, side C, side Bb Pivot screws shall be tapered Needle spring shall blued steel Pads shall be treated kid leather with resonators Case shall be included Qty: 0001 EA CLIN0005: Professional Alto Saxophone Referenced MFR: Selmer Referenced Part number: 52JU or equal Shall be Series II body style-full sound Necks shall be Series II bore Construction shall be full ribs Body material shall be yellow brass Mechanism shall have compact key positioning - closer to the body and directly under the hand Range shall be high F# key Front F key shall have spatula Left-hand thumb rest shall be plastic Right-hand thumb rest shall be plastic and adjustable Adjusting screws shall have high F, G# key, F#/G# lug, F#/G#, adjusting bar, low C#, low B, side C, side Bb Pivot screws shall be tapered Needle springs shall be blued steel Pads shall be treated leather with metal resonators Case shall be included Qty: 0001 EA CLIN0006: Professional Tenor Saxophone Referenced MFR: Selmer Referenced Part number: 54JU or equal Shall be Series II body style-full sound Necks shall be Series II bore Construction shall be full ribs Body material shall be yellow brass Mechanism shall have compact key positioning - closer to the body and directly under the hand Range shall be high F# key Front F key shall have spatula Left-hand thumb rest shall be plastic Right-hand thumb rest shall be plastic and adjustable Adjusting screws shall have high F, G# key, F#/G# lug, F#/G#, adjusting bar, low C#, low B, side C, side Bb Pivot screws shall be tapered Needle springs shall be blued steel Pads shall be treated leather with metal resonators Case shall be included Qty: 0001 EA CLIN0007: Professional Baritone Saxophone Referenced MFR: Selmer Referenced Part number: 55AFJ or equal Acoustics shall be one-piece body style Range shall be Low A - High F# Construction shall be split ribs Brass shall be brass alloy Mechanism shall have compact key positioning - closer to the body and directly under the hand Front F Key shall have spatula Left-hand thumb rest shall be plastic Right-hand thumb rest shall be metal and adjustable Adjusting screws shall have high E & F, low B table key, G# key, F#/G# lug, F#/G# adjusting bar, low C#, low B, side C, side Bb Pivot screws shall be tapered Needle springs shall be blued steel Pads shall be treated kid leather with metal resonators - projection Case shall be included Qty: 0001 EA CLIN0008: Professional Trumpet Referenced MFR: Yamaha Referenced Part number: YTR-8335IIS or equal Key shall be Bb Bell Material shall be One Piece Yellow Brass Bell Diameter shall be 4 7/8"" Bore size shall be ML 11.65mm Weight shall be heavy Finish shall be Silver Plated Case shall be included Level shall be Custom Xeno Series Key Buttons shall have Mother of Peral Pistons/Valves shall be Monel, two piece valve casings Qty: 0002 EA CLIN0009: Professional Cornet Referenced MFR: Bach Referenced Part number: 184ML or equal Shall be Short Shepherds crook design Bore shall be .459"" medium-large Bell shall be yellow brass one piece hand hammered bell Shall have Monel Pistons Shall have 1st slide thumb trigger, Shall have adjustable 3rd slide rod stop Shall have clear lacquer finish Case shall be included Qty: 0001 EA CLIN0010: Professional French Horn Referenced MFR: Conn Referenced Part number: 8DS or equal Shall be for Field use only Key shall be F/Bb Shall have.468"" bore Shall have Kruspe wrap Shall have 12-1/4"" large throat nickel silver bell Shall be all nickel silver construction Shall have tapered rotors and bearings Shall have mechanical change valve Shall have adjustable bridge lever Shall have Silver plated finish Case shall be included Qty: 0001 EA CLIN0011: Professional Tenor Trombone Referenced MFR: Bach Referenced Part number: 42 or equal Key shall be Bb/F Bore shall be .547-inch Leadpipe shall be fixed Leadpipe material shall be yellow brass Bell shall be 8.5"" one piece hand hammered Bell material shall be yellow brass Handslide shall be standard Handslide material shall be Nickel silver Handslide crook shall be nickel silver F attachment wrap shall be open Features shall include Ball Bearing Rotor Linkage, nickel silver tuning slide receiver and tubular nickel silver braces Mouthpiece shank shall be large Finish shall be lacquer Case shall be included Qty: 0002 EA CLIN0012: Professional Flugel Horn Referenced MFR: Yamaha Referenced Part number: YFH-8315G or equal Key shall be Bb Bore shall be .413-inch Leadpipe shall be Moveable Mouthpiece Receiver Leadpipe Material shall be Gold Brass Bell shall be 6-inch Bell Material shall be Gold Brass Valves shall be Monel Piston 3rd Valve Slide Adjustment shall be Trigger Case shall be included Finish shall be Lacquer Qty: 0001 EA CLIN0013: Professional Sousaphone Referenced MFR: Conn Referenced Part number: 20KSPW or equal Key shall be BBb Weight shall be 28 pounds Bore shall be .734-inch Bell shall be 26-inch Bell Material shall be Brass Body Material shall be Brass Number of Valves shall be 3 Valve Position shall be Front Action Piston Valve Material shall be Nickel Features shall include Exclusive Offset Short Action Pistons Case shall be 7761C Wheeled Case Finish shall be Silver Qty: 0001 EA CLIN0014: Professional Model Euphonium Referenced MFR: Yamaha Referenced Part number: YEP-842S or equal Key shall be Bb Body shall be Yellow brass Bell Diameter shall be 300mm (11 4/5"") Bore Size shall be 15-16.8mm (0.591-0.661"") Height shall be 664mm Valves shall be 3 top + 1 side, compensating Finish shall be Silver-plated with gold-plated trim Case shall be included Qty: 0001 EA
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/bf3ec6770b7f49c4aae304be1a15df9a/view)
- Place of Performance
- Address: Okinawa, JPN
- Country: JPN
- Country: JPN
- Record
- SN05672132-F 20200529/200527230200 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |