SOURCES SOUGHT
29 -- Pre-Cleaner Assembly 2940-01-408-7047
- Notice Date
- 5/21/2020 11:29:12 AM
- Notice Type
- Sources Sought
- NAICS
- 333618
— Other Engine Equipment Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- 84616365
- Response Due
- 5/29/2020 12:00:00 PM
- Archive Date
- 06/13/2020
- Point of Contact
- Jarius Merriweather, Phone: 6146926567
- E-Mail Address
-
jarius.merriweather@dla.mil
(jarius.merriweather@dla.mil)
- Description
- Contract Specialist: Jarius Merriweather������ Email: Jarius.Merriweather@dla.mil NSN: 2940-01-408-7047 Drawings � IAW BASIC DRAWING NR 19207 12388262 REVISION NR A DTD 12/10/1996 PART PIECE NUMBER:��������������������������������� IAW REFERENCE DRAWING NR 19207 12387305 REVISION NR DTD 01/27/1992 PART PIECE NUMBER:������������������������������������������������������������������������ IAW REFERENCE DRAWING NR 19207 12287777 REVISION NR E DTD 09/07/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387269 REVISION NR D DTD 08/09/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344424 REVISION NR B DTD 09/08/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344177 REVISION NR A DTD 02/03/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344184 REVISION NR DTD 09/21/2006 Page6 /17 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12346099 REVISION NR DTD 09/21/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388262 REVISION NR DTD 02/08/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388261 REVISION NR DTD 01/18/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388251 REVISION NR E DTD 01/22/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12388262 REVISION NR DTD 05/04/2016 PART PIECE NUMBER: ---------------------------------------------------------------------------------------------------------- The AMC/AMSC for the NSN listed above is �1 G� AMC ""1"". Acquire directly from the actual manufacturer, whether or not the prime contractor is not the actual manufacturer. AMSC ""G"".� The Government has unlimited rights to the technical rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2."" ---------------------------------------------------------------------------------------------------------- Please review the NSN listed above and provide any sources that may be able to manufacture these items. The drawings for this NSN are currently listed above.�� All information may be submitted directly to the Contract Specialist listed above. This information must be provided by the response date indicated above.� NOTE: This project contains Drawings/Specifications. You may access the TDP directly from cFolders and searching for the above cited PR Number. (CL84616365) You may access them only through the following link: https://pcf1.bsm.dla.mil/cfolders. The drawings cannot be accessed through DIBBS.� Potential vendors must have a valid JCP certification and be approved for the E-JCP by DLA HQ This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export.� Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad.� This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures.� Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.� In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration.� If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis.� Failure to comply timely with required information may result in lack of consideration for DLA solicitations.� It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence.� DLA will work diligently on validating vendor requests.� Vendors will be notified within 3 business days of when their requests were approved.� However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/548353b4e271494086838c57bb7d079b/view)
- Place of Performance
- Address: Columbus, OH 43213, USA
- Zip Code: 43213
- Country: USA
- Zip Code: 43213
- Record
- SN05668415-F 20200523/200521230231 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |