SOLICITATION NOTICE
30 -- McNary Spillway Gantry Cranes Main Hoist Gearbox Replacement
- Notice Date
- 5/19/2020 12:54:05 PM
- Notice Type
- Presolicitation
- NAICS
- 333612
— Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
- Contracting Office
- US ARMY ENGINEER DISTRICT WALLA WAL WALLA WALLA WA 99362-1876 USA
- ZIP Code
- 99362-1876
- Solicitation Number
- W912EF20B0012
- Response Due
- 6/22/2020 10:00:00 AM
- Archive Date
- 07/07/2020
- Point of Contact
- Alan Inglis, Phone: 509-527-7217
- E-Mail Address
-
alan.n.inglis@usace.army.mil
(alan.n.inglis@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for the service of Gearbox Replacements, non-commercial services, prepared in accordance with Federal Acquisition Regulation Part 14. �The NAICS code applicable to this acquisition is 333612, with a Small Business Size Standard of 750 employees as determined by 13 CFR 121.104. Competition for this requirement is Set-Aside for small business. �Offers received from other than small business offerors will not be considered. �When available, the solicitation documents for this project W912EF-20-B-0012 will be provided via Beta.SAM https://www.beta.sam.gov on or around 22 May 2020. �Please do not submit a quote without the solicitation package that will be provided to industry by the Government as specified above. �The solicitation will be a Request for Quote (RFQ). �The official quotation due date will be contained in the solicitation and any solicitation amendments that may be issued. SCOPE OF WORK Work shall include, but is not limited to the design, manufacture and delivery of two new gearboxes to replace existing gearboxes on the spillway gantry cranes at McNary Lock and Dam. Gearboxes shall meet the following requirements: 60 hp at 690 rpm input 56:1 gear ratio Service factor: 2 Match existing base plate and shaft configuration Gears shall be of the spur or helical type in accordance with ANSI/AGMA 2001 (2004d) except gear quality shall be defined per ANSI/AGMA 2001 (1995c). Gears shall be cut from solid metal to tolerances equal to or better than AGMA Quality Number 8 as defined in AGMA 2000 Bearings shall be of the anti-friction type. Important Note: the Beta.SAM response date listed elsewhere in this synopsis is for Beta.SAM archive purposes only. It does not necessarily reflect the actual due date that the RFQ is due.� NO CD's OR HARD COPIES WILL BE AVAILABLE. Offeror's are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to Beta.SAM.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me to Interested Vendors button in the listing for this solicitation on Beta.SAM.gov. All quotes received by the closing date that are small businesses will be considered by the Government. To be eligible for contract award, offerors must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.beta.sam.gov or contact SAM Customer Service at 866-606-8220. Offerors must also complete Offeror Representations and Certifications on-line at https://www.beta.sam.gov.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/8475794c26fd4aad872fc4ec04414f44/view)
- Place of Performance
- Address: Umatilla, OR 97882, USA
- Zip Code: 97882
- Country: USA
- Zip Code: 97882
- Record
- SN05662803-F 20200521/200519230155 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |