SOLICITATION NOTICE
84 -- Battlefield Airmen Rapid Refresh and Replenishment (BARS) Replenishment Stock - Apparel
- Notice Date
- 4/10/2020 7:15:06 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 315210
— Cut and Sew Apparel Contractors
- Contracting Office
- FA8629 AFLCMC WISK WRIGHT PATTERSON AFB OH 45433-7200 USA
- ZIP Code
- 45433-7200
- Solicitation Number
- FA8629-20-R-5046
- Response Due
- 4/24/2020 2:00:00 PM
- Archive Date
- 05/09/2020
- Point of Contact
- Amber Taylor, Phone: 703-347-5655
- E-Mail Address
-
amber.taylor.9@us.af.mil
(amber.taylor.9@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 and 13.1, as supplemented with additional information included in this notice.� This announcement constitutes the only solicitation and is issued as a Request for Quote (RFQ); a separate written solicitation will not be issued.� The following provisions and clauses are incorporated by reference:� 52.204-7, System for Award Management (Provision) 52.204-13, System for Award Management Maintenance (Clause) 52.212-4, Contract Terms and Conditions -- Commercial Items (Clause) 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items (Clause); applicable clauses 52.204-10, 52.209-6, 52.219-4, 52.219-28, 52.222-03, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.225-13, 52.232-33, and 52.232-36 are selected within. 52.232-18, Availability of Funds (Clause) 252.204-7007 Alt A, System for Award Management (Provision) 252.225-7000 Buy American Balance of Payment Program Certification (Provision) 252.225-7001 Buy American Balance of Payment Program (Clause) Quote Submittal Vendors may submit quotes for items that meet all of the physical, functional, and performance characteristics identified below.� The vendor shall identify the item make and model and describe the features of the item which support the vendor�s claim that the item is technically acceptable.� The Government will evaluate items on the basis of information furnished by the vendor, identified in the quote, and reasonably available to the Government.� The Government is not responsible for locating or obtaining information not otherwise provided by the vendor. �The requirement is as follows: SEE ATTACHED FILE FOR ITEM/QUANTITY BREAKOUT Physical, Functional, and Performance Requirements: Balaclava Machine washable and machine dryable 100% Merino Wool Itch-less, warm-when-wet, no-melt/no-drip Jersey knit construction; 230 g/m2 Flat lock or flat taped seams for strength, and to prevent chafing Approximate weight for size Large </= 3 oz (each) Thermal Mid-Weight Pant Machine washable and machine dryable 100% Merino Wool Itch-less, warm-when-wet, no-melt/no-drip Moisture wicking Jersey knit construction; 230 g/m2 Flat lock or flat taped seams for strength, and to prevent chafing Approximate weight for size Large </= 13 oz (each) UPF Rated Lightweight Thermal Pant Machine washable and machine dryable 100% Merino Wool Itch-less, warm-when-wet, no-melt/no-drip Jersey knit construction; 170 g/m2 Flat lock or flat taped seams for strength, and to prevent chafing Approximate weight for size Large </= 8 oz (each) UPF Rated Thermal Mid-Weight Shirt, � Zip Machine washable and machine dryable 100% Merino Wool Itch-less, warm-when-wet, no-melt/no-drip Moisture wicking Jersey knit construction; 230 g/m2 Flat lock or flat taped seams for strength, and to prevent chafing Approximate weight for size Large </= 13 oz (each) UPF Rated 1/4 zip Lightweight Thermal Shirt Machine washable and machine dryable 100% Merino Wool Itch-less, warm-when-wet, no-melt/no-drip Moisture wicking Jersey knit construction; 170 g/m2 Flat lock or flat taped seams for strength, and to prevent chafing Approximate weight for size Large </= 8 oz (each) UPF Rated Super Glove Outer Shell: Thin material providing durability, grip, and tactility Moisture Barrier: Material providing high breathability, high heat resistance, high temperature stability, continuous moisture barrier protection and fast drying Thermal Lining: Low-bulk, high thermal resistance material Wing thumb Level of Bloodborne Pathogen Protection: HNO NFPA 1971, Structural Full Dexterity Tactical Gloves� Conductive Thumb and Trigger Finger material for touch screen use without loss of tactile dexterity Single layer multi-piece palm � i.e. only one layer of material contacts the shooting grip Sensitized and isolated trigger finger � i.e. only on the trigger finger Low-profile hook closure � i.e. reduces abrasion on clothing Flex joints for enhanced flexibility and ventilation on each finger Dual flex joint trigger finger for maximum flexibility Bar-tacked para cord pull loop Short cuff for lightweight comfort Micro suede nose wipe Ventilation holes in palms and fingers to increase wicking Isolated edge padding for added protection without compromising the shooting grip Wrap-over finger tips for protection of finger nails Stretch Ballistic Nylon 1000D padded knuckles Buy American and Balance of Payments Program The items solicited are determined to be COTS items as defined in DFARS 252.225-7001.� Vendors responding to this RFQ shall identify whether each quoted item is a domestic end product , a qualifying country end product, or otherwise,�by identifying the place of manufacture for each item quoted. The Berry Amendment The Independent Government Estimate for these items is estimated to be less than the Simplified Acquisition Threshold (SAT); therefore the Contracting Officer has determined that the exception at DFARS 225.7002-2(a) applies to this acquisition.� Evaluation Criteria and Basis for Award The Government intends to issue one (1) firm fixed price (FFP) contract to the responsible offeror that provides the lowest-price, technically acceptable (LPTA) quote.� �� Delivery Delivery/Acceptance term shall be FOB Destination to: (1) BARS Inventory Control Point ATTN: Ms. Heather Pyland / GUARDIAN ANGEL 3290 16th Street Bedford, IN 47421 Phone: 812-236-5076 Packaging/Marking The Contractor shall pack and mark all equipment, and deliver the shipments in good order to the point of delivery.� The Contractor is responsible for loss of, and/or damage to, the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point. � Date of Delivery Vendors responding to this RFQ shall identify the anticipated delivery date in terms of days after receipt of order (DARO) in their response. Response Due Date/Time Responses shall be submitted via email to the Contracting Officer, Amber Taylor, at amber.taylor.9@us.af.mil not later than the date/time indicated in this notice.� Late responses may not be considered.� Validity Period The vendors shall hold the quoted prices for not less than 30 calendar days from the date specified for receipt of quotes. � Questions All questions are to be submitted via email to the above listed Contracting Officer.�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/0cdaabafa47d456ca8af2b758eb9bde1/view)
- Place of Performance
- Address: Bedford, IN 47421, USA
- Zip Code: 47421
- Country: USA
- Zip Code: 47421
- Record
- SN05618080-F 20200412/200410230147 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |