SOURCES SOUGHT
K -- MOD4 Retractable Sheave Locking Pin Bushings
- Notice Date
- 4/5/2020 11:10:06 AM
- Notice Type
- Sources Sought
- NAICS
- 332812
— Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
- Contracting Office
- NAVAIR WARFARE CTR AIRCRAFT DIV LKE JOINT BASE MDL NJ 08733 USA
- ZIP Code
- 08733
- Solicitation Number
- N68335-20-R-0191
- Response Due
- 4/25/2020 1:00:00 PM
- Archive Date
- 05/10/2020
- Point of Contact
- Keith Welge
- E-Mail Address
-
keith.welge@navy.mil
(keith.welge@navy.mil)
- Description
- This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This sources sought does not commit the Navy to contract for any supply or service whatsoever. Furthermore, the Navy is not seeking proposals at this time. Responders are advised the U.S. Navy will not pay for any information or administrative costs incurred in response to this sources sought; all costs associated with responding to this sources sought will be solely at the interested party's expense. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. The Navy will not be liable for or suffer any consequential damages for any proprietary information not properly identified. Proprietary information will be safeguarded in accordance with the applicable Navy regulations. Naval Air Systems Command (NAVAIR), Naval Air Warfare Center - Aircraft Division (NAWCAD) is seeking potential sources for a planned procurement of flanged journal bearings for the Mark 7 MOD4 Retractable Sheave Locking Pins. These bearings are required have identical outer diameter, inner diameter, flange diameter, overall length and flange thickness to the existing bearings, Kamatics PN KNRJ32-UD-074 and KNRJ32-UD-152. The locking pins are made from QQ-N-286 (Monel� K500), hardened to 24 HRC minimum, move axially and are non-lubricated. Pins move 4 inches at a speed of approx. 50 inches per second and are typically do not support a load when moving. Bearings shall be metallic and have a dry lubricant on the inner diameter that is embedded such that it is retained if the inner diameter wears up to .020 of an inch radially. The metallic material shall have at least 40ksi yield tensile strength (YTS) and not gall with or cause adverse wear on the locking pin. The Retractable Sheave is used in a crucial shipboard system supporting the recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious loss of a vital shipboard system. THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. The Navy is not obligated to and will not pay for any information received from potential sources as a result of this notice. ELIGIBILITY: The PSC for this requirement is K017; the NAICS is 332812. All interested respondents must have a Data Universal Numbering System (DUNS), be registered in the System for Award Management (SAM), and submit a current copy of your Military Critical Technical Data Agreement (DD Form 2345) in order to receive the weldment drawing.�� ��� SUBMITTAL INFORMATION: It is highly recommended that interested businesses submit a capabilities statement to the contracting office.� The specific content and length of the capabilities statement is at the discretion of the supplier, however, the following is strongly recommended to be included: Supplier Contact Information to include: Company Name, Company Address, Company Business Size, and Point-of-Contact (POC) name, phone number, and e-mail address. Supplier Profile to include:� Number of employees, DUNS number, and Cage Code Supplier Description Supplier brochure (if available) Supplier Website If you are a small business, provide an explanation of your company's ability to perform at least 50% of the tasking described in the specifications. Submission of the above information does not guarantee you will become an approved source. All interested parties are highly encouraged to submit sources sought responses, preferably via electronic mail. While the Navy will use this information for future acquisition planning, it will NOT release any information about your approach that might in any way compromise your competitive posture or proprietary information. The Navy will not use any information provided to level your company's approach relative to another competitor. All information received in response to this sources sought is marked PROPRIETARY will be handled accordingly. The Navy will not be liable for or suffer any consequential damages for any proprietary information not properly identified. Proprietary information will be safeguarded in accordance with the applicable Navy regulations. Information provided to this sources sought in no way binds the Navy to solicit or award a future contract. Responses to this sources sought will not be returned.�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/1dd79b0fad6a452fad1ac314f870e332/view)
- Place of Performance
- Address: Joint Base MDL, NJ 08733, USA
- Zip Code: 08733
- Country: USA
- Zip Code: 08733
- Record
- SN05610567-F 20200407/200405230140 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |