SOLICITATION NOTICE
47 -- HOSE ASSEMBLY, NONMETALLIC
- Notice Date
- 3/23/2020 2:15:45 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 326220
— Rubber and Plastics Hoses and Belting Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MC-20-R-X006
- Response Due
- 4/6/2020 8:59:00 PM
- Archive Date
- 04/21/2020
- Point of Contact
- Teresa Kershaw, Phone: 614-692-3029
- E-Mail Address
-
teresa.kershaw@dla.mil
(teresa.kershaw@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The requirement for NSN 4720-01-567-8287 will be procured under an Indefinite Delivery Contract (IDC) using FAR Part 13 Simplified Procedures. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.� A base period of 1 base year and two separate 1-year option years with a total duration not to exceed 3 years is anticipated. Deliveries are DLA Direct within 122 days of order. This solicitation will be issued as a 100% set aside for small business concerns. Item Description: HOSE ASSEMBLY,NONMETALLIC RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML).� THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML).� QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)"" APPLY. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). FULL AND OPEN COMPETITION APPLY SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE W, WITH A TOTAL SHELF LIFE OF ONE HUNDRED TWENTY MONTHS. MATERIAL FURNISHED UNDER THIS CONTRACT/ ORDER SHALL HAVE AT LEAST 85% (102 MONTHS) OF THE SHELF LIFE REMAINING AT TIME OF DELIVERY. SHELF LIFE MARKINGS REQUIRED PER 5.2.1 OF MIL-STD-129: SHELF-LIFE MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS. SHELF-LIFE MARKINGS SHALL INCLUDE THE MANUFACTURED, CURED, ASSEMBLED, OR PACKED DATE (APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST DATE, AS APPROPRIATE. CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19207 12505644 REVISION NR A�� DTD 11/10/2008 PART PIECE NUMBER: IAW REFERENCE SPEC NR MIL-DTL-13444J REVISION NR J�� DTD 04/02/2019 PART PIECE NUMBER: IAW REFERENCE STD NR MIL-STD-129R(2) REVISION NR R�� DTD 09/27/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12505644 REVISION NR���� DTD 03/21/2019 PART PIECE NUMBER: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001� PRES MTHD:10� CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:CA� CUSH/DUNN MAT:00� CUSH/DUNN THKNESS:0 UNIT CONT:D3� OPI:O INTRMDTE CONT:DO� INTRMDTE CONT QTY:AAA PACK CODE = Q: PACKING LEVEL = B: MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 F.O.B. Destination and Inspection/Acceptance at Destination is requested.� One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.� The AMC/AMSC for this item is 1G.� This means this part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Various Increments Solicited: FROM:�� TO: 110 - 224 225 - 674 675 - 1124 1126 - and Up Based on market research, this item is commercial and the Government is using the policies contained in FAR Part 13 for this solicitation. The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of March 233, 2020. �Hard copies of this solicitation are not available. While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, past performance, and other evaluation factors identified in the solicitation. All offers shall be in the English language and US dollars. All interested suppliers may submit an offer. DLA Internet Bid Board System (DIBBS) quotations are not acceptable for this solicitation. Offerors must complete the entire solicitation. Quotes must be submitted on a hard copy of the Request for Quote (RFQ), scanned, and emailed to Teresa.kershaw@dla.mil.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/c13184f2a2ee41d580c2c44301f1f09f/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05597587-F 20200325/200323230149 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |