SOLICITATION NOTICE
59 -- Resistor, Variable, Motor Driven
- Notice Date
- 3/6/2020 12:04:38 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334416
— Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M5-20-Q-0365
- Response Due
- 4/22/2020 12:00:00 PM
- Archive Date
- 05/07/2020
- Point of Contact
- Kenneth W. Planty, Phone: 6146928580, Fax: 6146924230
- E-Mail Address
-
kenneth.plany@dla.mil
(kenneth.plany@dla.mil)
- Description
- This procurement will utilize FAR 13.5 for Commercial Items procedures. NSN: 5905-01-203-8072 PR No.: 0082035226 Item: Resistor, Variable, Motor Driven Other Than Full and Open Competition applies in accordance with FAR 6.302-1 Manufacturer�s Code and Part Number: 54395 P/N U-307133 Drawing Number: In-Accordance-With Drawing No. (78286) 70301-02109 and all associated drawings Quantity: 120 Various Increments Solicited: 50 To 74 75 To 99 100 To 124 125 To 149 150 To 174 175 To 200 Unit of Issue: Each F.O.B: Origin Inspection/Acceptance: Destination Destination Information: SW3122 Delivery Schedule: 25 each in 200 days after date of contract and any balance shall be delivered at the rate of 25 each every 30 days thereafter. Joint Certification Program (JCP) Certification requirement applies.� The solicitation document contains information that has been designated as ""Militarily Critical Technical Data"" and have been �classified�. Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid security clearance may have a copy of the solicitation document and drawings. This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export.� Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad.� This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures.� Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.� In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration.� If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis.� Failure to comply timely with required information may result in lack of consideration for DLA solicitations.� It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence.� DLA will work diligently on validating vendor requests.� Vendors will be notified within 3 business days of when their requests were approved.� However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses. This solicitation is being issued under the First Destination Transportation (FDT) program.� If this acquisition is for Foreign Military Sales (FMS) or has an APO/FPO ship-to-address, FDT will not apply and normal procedures should be followed. For FDT program transportation requirements, see Procurement Notes C16 Government-Arranged Transportation for Manual Award and C17 Shipments Originating from Outside the Contiguous United States. Addition information about FDT can be found on the FDT website (http://www.dla.mil/FDTPI/). All responsible sources may submit an offer/proposal which shall be considered. The following Government-wide Numbered Note(s) applies: * The solicitation document contains information that has been designated as ""Militarily Critical Technical Data."" Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.; * The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. ; � The solicitation will be available at https://www.dibbs.bsm.dla.mil/RFQ on its issue date of (on or about) 3/23/2020. This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).� Approved source is: Electromech Technologies LLC (54395). � This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100.� Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. The cited drawing is a source controlled drawing and as of the date of this solicitation only the source(s) cited on the drawing have been approved.� Even though sources and approved part numbers are provided, the items furnished must meet the requirements of the cited drawing.� Offerors who are interested in qualifying their products for purpose of future acquisition must contact the cognizant design activity specified on the source controlled drawing.� Also, may include additional approved sources that have not been reflected on the drawing at this time. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.� Reverse Auction does not apply.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/4953940c89c8478f9a99ad60e4382615/view)
- Record
- SN05582164-F 20200308/200307085919 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |