SAMDaily.us | PRESOL | 61 | TORQUE MOTOR

SAMDAILY.US - ISSUE OF MARCH 06, 2020 SAM #6672
SOLICITATION NOTICE

61 -- TORQUE MOTOR

Notice Date: 3/4/2020 7:55:15 AM
Notice Type: Presolicitation
NAICS: 335312 — Motor and Generator Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
ZIP Code: 43218-3990
Solicitation Number: SPE7M120R0007
Response Due: 1/19/2020 12:00:00 PM
Archive Date: 02/03/2020
Point of Contact: Eukia Bryant, Phone: (614)692-8997
E-Mail Address: Eukia.Bryant@dla.mil
(Eukia.Bryant@dla.mil)
Description: MOTOR,TORQUE RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export.� Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad.� This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures.� Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data. �In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration.� If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis.� Failure to comply timely with required information may result in lack of consideration for DLA solicitations.� It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence.� DLA will work diligently on validating vendor requests.� Vendors will be notified within 3 business days of when their requests were approved.� However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses. THIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HAS BEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATE COVERED DEFENSE INFORMATION (CDI).� CDI IS UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION, AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION (CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TO DFARS 252.204-7012. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED.� EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING.� OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export.� Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad.� This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures.� Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data. �In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration.� If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis.� Failure to comply timely with required information may result in lack of consideration for DLA solicitations.� It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence.� DLA will work diligently on validating vendor requests.� Vendors will be notified within 3 business days of when their requests were approved.� However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses. CRITICAL APPLICATION ITEM MOOG INC. DBA Moog Components Group 99932 P/N TD-4875-A-1 KEARFOTT CORPORATION DBA 05088 P/N CU09609160 IAW BASIC DRAWING NR 19207 12281215 REVISION NR R�� DTD 05/15/1991 PART PIECE NUMBER: 12281215 IAW REFERENCE DRAWING NR 19207 12281215 REVISION NR K�� DTD 07/01/1961 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C�� DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 SK1215C REVISION NR C�� DTD 04/15/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12281215 REVISION NR�� DTD 06/26/2018 PART PIECE NUMBER: NSN(s): 6105-01-078-1298 Item Description: Motors, Electrical Manufacturer�s Code and Part Number (if applicable): Kearfott Corporation (05088), part number CU09609160 and MOOG, Inc. (99932), part number TD-4875-A-1 Quantity (including option quantity): 105 units Unit of Issue: EA Destination Information: FOB Origin (First Destination Transportation); Inspection/Acceptance Destination Delivery Schedule: 330 Days All responsible sources may submit an offer/quote which shall be considered. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. (X)� The solicitation will be available in FedBizOpps on its issue date of 12/30/2019 (X)� The Small Business size standard is 1,250 employees. (X) This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data;� therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1).� Approved sources are Kearfott Corporation (05088), part number CU09609160 and MOOG, Inc. (99932), part number TD-4875-A-1. (X)� While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. (X)� Various Increments Solicited: �� FROM:� 100�� TO: 149 �� 150�� 199 �� 200�� 249 �� 250�� 299��
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/3aeaf9c087c64bc6831024c6ba0f66e4/view)
Record: SN05579741-F 20200306/200304230145 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

61 -- TORQUE MOTOR