SOURCES SOUGHT
99 -- Aircraft Static Mounting
- Notice Date
- 2/28/2020 1:44:30 PM
- Notice Type
- Sources Sought
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- FA2860 11 CONS LGC JB ANDREWS MD 20762-7001 USA
- ZIP Code
- 20762-7001
- Solicitation Number
- A006142
- Response Due
- 3/5/2020 9:00:00 AM
- Archive Date
- 03/15/2020
- Point of Contact
- Joel Brown, Phone: 240-612-5634
- E-Mail Address
-
joel.e.brown45.mil@mail.mil
(joel.e.brown45.mil@mail.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to safely lift a UH-1N Huey helicopter (static display) of approximately 7500 lbs from a trailer (or current location) to be mounted as a static display on the concrete foundation in the required configuration.� The crane and outriggers must not damage the asphalt, sidewalks or other existing conditions.� Proper stabilization of the static display will be used during lift to prevent load from becoming unstable.� Any welding will be performed by a certified American Welding Society craftsmen and certification documents shall be provided prior to site work. The contractor will manufacture a four-point pedestal through coordination with the base Civil Engineering Squadron to ensure that the aircraft can be mounted to the site already prepared. �The mount will allow for the aircraft to be displayed in a 5 degree pitch down and 8 degree left bank onto the four points already in place at the mounting area.� Finally, the contractor will ensure that the aircraft is mounted and secured safely (welded) to the pedestal as well as secure the rotor blades in a position so as not to interfere with any potential traffic on the pedestrian walkways and able to withstand winds up to 100 mph. It is the contractor�s responsibility to ensure proper permitting has been accomplished for field welding on JB Andrews prior to arrival on site.� When work is complete the mounting area and surrounding work area will be cleaned appropriately.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/c794ef004bcb4aeca80ea44edcfd95fe/view)
- Place of Performance
- Address: JB Andrews, MD 20762, USA
- Zip Code: 20762
- Country: USA
- Zip Code: 20762
- Record
- SN05576253-F 20200301/200228230316 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |