SOLICITATION NOTICE
59 -- Misc Fittings, Covers, Raceways
- Notice Date
- 2/25/2020 9:37:00 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 335999
— All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Contracting Office
- U S ARMY DEPOT TOBYHANNA TOBYHANNA PA 18466-5079 USA
- ZIP Code
- 18466-5079
- Solicitation Number
- 002906L1
- Response Due
- 3/6/2020 8:59:59 PM
- Archive Date
- 09/02/2020
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Awardee
- null
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 002906L1 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-03-06 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions. The APG - Tobyhanna requires the following items, Brand Name Only (Exact Match), to the following: LI 001: Raceway Cover part number T45CIW10, manufacture PANDUIT CORP Please quote all or none. EACH MEANS TOTAL QUANTITY, EACH DOES NOT MEAN PACK/PACKAGE 52.225-1 Buy American Act Supplies, Method of payment WAWF, Brand Name only no substitutes, delivery in this solicitation is estimated and will be determined the day of award. Partial and early delivery are acceptable. Will accept direct offers to michael.j.clark238.civ@mail.mil THE AWARD WILL BE MADE TO THE RESPONSIBLE VENDOR WHOSE OFFER MEETS TO THE EXACT REQUIREMENTS OF THE SOLICITATION AND IS THE BEST VALUE TO THE GOVERNMENT ON THE BASIS OF PRICE, DELIVERY AND PAST PERFORMANCE. SHIP TO: FT Belvoir Modernization Product Team 9815 Dalrymple Rd Bldg 709 ATTN: Jerry Carter (703)805-2148 or 2121 FT Belvoir, VA 22060, 196, EA; LI 002: Raceway Base T-45 1- FEET part number T45BIW10, 196, EA; LI 003: Raceway Cover part number T45CCIW-X, 8, EA; LI 004: FACEPLATE, MINI-COM, BLANK PN:CMBIW-C MATERIAL DESCRIPTION:BLANK MINI-COM FACEPLATE MODULE MINI-COM?? 1-PORT BLANK MODULE, RESERVES SPACE FOR FUTURE USE, 100, EA; LI 005: CAT 6, RJ45 MODULE (24 EA) PN:CJ688TGGR-24 MATERIAL DESCRIPTION: CATEGORY 6, RJ45, 8-POSITION, 8-WIRE UNIVERSAL MODULE, BULK PACKAGED., 504, EA; LI 006: VERTICAL SLOPED MINI-COM MODULE FACEPLATE PN:CFPSL4IWY MATERIAL DESCRIPTION:VERTICAL SLOPED MINI-COM MODULE FACEPLATE SINGLE GANG, SLOPED VERTICAL FACEPLATE ACCEPTS FOUR MINI-COM?? MODULES, 73, EA; LI 007: NON-METALLIC WIRE RETAINER PN: T45WR-X, 1310, EA; LI 008: NON-METALLIC TEE FITTING PN: T45TIW, 31, EA; LI 009: NON-METALLIC RIGHT ANGLE FITTING PN: T45RAIW, 10, EA; LI 010: FITTING, CORNER, OUTSIDE, T-45 PN:T45OCIW MATERIAL DESCRIPTION:T-45 OUTSIDE CORNER FITTING FOR 90?? ANGLES, 10, EA; LI 011: NON-METALLIC INSIDE CORNER FITTING PN: T45ICIW, 22, EA; LI 012: T-45 HINGED DATA BRACKET PN:T45HDBIW MATERIAL DESCRIPTION:T-45 SNAP-ON HINGED DATA BRACKET ACCEPTS UP TO FOUR MINI-COM MODULES, 146, EA; LI 013: NON-METALLIC ENTRANCE END FITTING PN: T45EEIW, 106, EA; LI 014: NON-METALLIC END CAP FITTING PN: T45ECIW, 158, EA; LI 015: CABLE STRAIN RELIEF BAR PN:SRBWCY MATERIAL DESCRIPTION:STRAIN RELIEF BAR WITH INTEGRATED ADJUSTABLE CLIPS; SUPPORTS, MANAGES, AND PROVIDES PROPER BEND RADIUS PROTECTION FOR UP TO 24 CABLES, 14, EA; LI 016: SINGLE GANG OUTLET BOX 2PC FOR SCREW ON FACEPLATE PN:JBX3510IW-A MATERIAL DESCRIPTION:SINGLE GANG OUTLET BOX 2PC FOR SCREW ON FACEPLATE SINGLE GANG TWO-PIECE SNAP TOGETHER OUTLET BOX WITH ADHESIVE BACKING. BOX ACCEPTS PAN-WAY?? SCREW-ON FACEPLATES OR ANY NEMA STANDARD SINGLE GANG FACEPLATE FOR USE WITH PAN-WAY?? T45 OR LD PROFILE RACEWAY. 5.00""L X 3.26""W X 1.62""H (127.1MM X 82.7MM X 41.1MM). BREAKOUTS FOR 1/2"", 3/4"", OR 1"" DIAMETER CONDUIT, 46, EA; LI 017: 48 PORT PATCH PANELS PN:CPPA48FMWBLY MATERIAL DESCRIPTION: 48 PORT PATCH PANELS FOR RJ-45 - MINI-COM ANGLED FLUSH MOUNT PATCH PANELS, 9, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, APG - Tobyhanna intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. APG - Tobyhanna is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. EFFECTIVE JAN 2005, all offerors are required to use ?Online Representations and Certifications Application (ORCA) to respond to federal solicitations. To register in ORCA, please go to www.bpn.gov/orca. You must be active in the Central Contractor Registration (www.ccr.gov) and have a Marketing Partner Identification Number (MPIN), to register in ORCA. Failure to register in ORCA may preclude an award being made to your company. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far. 52.209-11 As prescribed in 9.104-7(d), insert the following provision: Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016) (a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that-- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that� (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations--Representation. As prescribed in 9.108-5(a), insert the following provision: Prohibition On Contracting With Inverted Domestic Corporations--Representation (Nov 2015) (a) Definitions. �Inverted domestic corporation� and �subsidiary� have the meaning given in the clause of this contract entitled Prohibition on Contracting with Inverted Domestic Corporations (52.209-10). (b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (c) Representation. The offeror represents that� (1) It [ ] is, [X ] is not an inverted domestic corporation; and (2) It [ ] is, [X] is not a subsidiary of an inverted domestic corporation. 52.212-4, 52.219-6, 52.247-34,252.203-7000, 252.203-7002, 252.204-7012, 252.225-7048,252.213-7000, 5152.233-4001 52.212-5, 52.252-2,252.232-7006 THE PAST PERFORMANCE INFORMATION RETRIEVAL SYSTEM-STATISTICAL REPORTING APPLICATION WILL BE USED IN THE EVALUATION OF SUPPLIERS' PAST PERFORMANCE IN ACCORDANCE WITH DFARS Buy American Act Supplies UID over $5000.00 each This is a fill in �Driving�� (1) Means operating a motor vehicle on an active roadway with the motor running, including while temporarily stationary because of traffic, a traffic light, stop sign, or otherwise. (2) Does not include operating a motor vehicle with or without the motor running when one has pulled over to the side of, or off, an active roadway and has halted in a location where one can safely remain stationary. �Text messaging� means reading from or entering data into any handheld or other electronic device, including for the purpose of short message service texting, e-mailing, instant messaging, obtaining navigational information, or engaging in any other form of electronic data retrieval or electronic data communication. The term does not include glancing at or listening to a navigational device that is secured in a commercially designed holder affixed to the vehicle, provided that the destination and route are programmed into the device either before driving or while stopped in a location off the roadway where it is safe and legal to park. (b) This clause implements Executive Order 13513, Federal Leadership on Reducing Text Messaging while Driving, dated October 1, 2009. (c) The Contractor is encouraged to� (1) Adopt and enforce policies that ban text messaging while driving� (i) Company-owned or -rented vehicles or Government-owned vehicles; or (ii) Privately-owned vehicles when on official Government business or when performing any work for or on behalf of the Government. (2) Conduct initiatives in a manner commensurate with the size of the business, such as� (i) Establishment of new rules and programs or re-evaluation of existing programs to prohibit text messaging while driving; and (ii) Education, awareness, and other outreach to employees about the safety risks associated with texting while driving. (d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts that exceed the micro-purchase threshold. THE AWARD WILL BE MADE TO THE RESPONSIBLE VENDOR WHOSE OFFER MEETS TO THE EXACT REQUIREMENTS OF THE SOLICITATION AND IS THE BEST VALUE TO THE GOVERNMENT ON THE BASIS OF PRICE, DELIVERY AND PAST PERFORMANCE.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/ded7737730b14253839b74935f2dbcb7/view)
- Place of Performance
- Address: Special Shipping Instructions.
- Record
- SN05572125-F 20200227/200225230141 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |