SOURCES SOUGHT
93 -- Side Seal / Bulb Seal FSC 9390
- Notice Date
- 2/6/2020 10:15:21 AM
- Notice Type
- Sources Sought
- NAICS
- 327999
— All Other Miscellaneous Nonmetallic Mineral Product Manufacturing
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111 USA
- ZIP Code
- 19111
- Solicitation Number
- SPE8E920R0002
- Response Due
- 2/14/2020 1:00:00 PM
- Archive Date
- 02/29/2020
- Point of Contact
- Jessica Sheaffer, Phone: 2157374754
- E-Mail Address
-
jessica.sheaffer@dla.mil
(jessica.sheaffer@dla.mil)
- Description
- DLA Troop Support is seeking industry feedback from interested parties concerning the manufacture of Bulb Seals for use in LGM-30 missile system with the following technical characteristics: NSNs: 9390-00-483-6954 & 9390-00-466-9381 NAICS: 326299 �All Other Rubber Product Manufacturing� Physical Form: Seal Quantity within Each Unit: 1 EA Specific Usage Design: Side Seal & Bulb Seal in LGM-30 system Material: Formed elastomer with a filled fluorocarbon film Technical Characteristics for the Side Seal� //� NSN : 9390-00-466-9381 �MRC Requirements Reply AASF NONMETALLIC HARDNESS RATING 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A AASH MINIMUM TENSILE STRENGTH 2000 POUNDS PER SQUARE INCH ABJH TEMP RATING -40.0 DEG FAHRENHEIT AND 115.0 DEG FAHRENHEIT ABKW OVERALL HEIGHT 2.000 INCHES NOMINAL ABMK OVERALL WIDTH 3.800 INCHES NOMINAL ABRY LENGTH 55.000 INCHES MINIMUM AND 55.500 INCHES MAXIMUM AEJJ INSIDE RADIUS �0.620 INCHES NOMIN AJGP BASE FLANGE THICKNESS 0.380 INCHES NOMINAL AJGW OUTSIDE RADIUS 1.120 INCHES NOMINAL AJHY FIRST FILLET RADIUS 0.120 INCHES NOMINAL FEAT SPECIAL FEATURES MATT: RUBBER, ASTM D2000, GRADE 2BA620A14B13C12F19Z1Z2 Technical Characteristics for the Bulb Seal �//� NSN : 9390-00-483-6954 MRC Requirements Reply AASF NONMETALLIC HARDNESS�� RATING 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A AASH MINIMUM TENSILE STRENGTH 2000 POUNDS PER SQUARE INCH ABJH TEMP RATING -40.0 DEG FAHRENHEIT AND 115.0 DEG FAHRENHEIT FEAT SPECIAL FEATURES MATT: RUBBER, ASTM D2000, GRADE 2BA620A14B13C12F19Z1Z2 ��������� � The contractor will be required to manufacture these items, conduct acceptance tests in accordance with the technical performance specification, and satisfy the Government's delivery requirements. Responses to this survey must include documentation citing the following: 1. The contractor's experience demonstrating the capability to meet the Government's requirements in producing products that meet all performance requirements and that are physically and functionally interchangeable with Bulb and Side Seals presently procured. 2.� Quality Standard (Government or Industry) that shall be in place for this effort. 3.� Past Performance for the same or similar items. The contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same or similar items for which they have production experience. Government contract numbers, if applicable, shall be provided. 4.� The contractor must provide information to show it possesses, or shall possess, adequate production plant facilities (equipment, tooling, and space) to enable it, or its subcontractors, to meet production delivery requirements for these items. Interested parties should provide written responses by close of business on Friday, February 14, 2020 by 4:00 PM EST to: Jessica Sheaffer, DLA Troop Support Construction & Equipment, at jessica.sheaffer@dla.mil or (215) 737-4754. This Sources Sought Notice is issued for the purpose of market research only and the Government is in no way obligated to purchase any material as a result of this inquiry. The Government will NOT pay for any information submitted by respondents in response to this Sources Sought Notice. If a solicitation would result, it would be synopsized on the FedBizOpps website and it would be the offeror's responsibility to monitor the FedBizOpps website for any such notices.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/074a485e723e4d46998023723e3650c7/view)
- Place of Performance
- Address: Philadelphia, PA 19111, USA
- Zip Code: 19111
- Country: USA
- Zip Code: 19111
- Record
- SN05554110-F 20200208/200206230139 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |