SOURCES SOUGHT
99 -- Advanced Combat Pant
- Notice Date
- 2/5/2020 7:47:09 AM
- Notice Type
- Sources Sought
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111 USA
- ZIP Code
- 19111
- Solicitation Number
- SPE1C120R----
- Response Due
- 2/13/2020 12:00:00 PM
- Archive Date
- 02/28/2020
- Point of Contact
- Don Howarth
- E-Mail Address
-
donald.howarth@dla.mil
(donald.howarth@dla.mil)
- Description
- Please see and return the attached informal market research survey for a potential new solicitation by Thursday February 13th, 2020. Please note, we are using these surveys to determine how many lots will be used under the procurement and to please provide accurate information to the best of their ability, specifically the quantity questions in bold. Army Combat Pant (ACP), OCP (PGC04113) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN Size UPC NSN XS-XSH 718020818016 8415016440101 XS-SH 718020767048 8415016440104 XS-RG 718020708126 8415016440107 XS-LG 718020653778 8415016440108 SM-SH 718020780382 8415016440198 S-SH 718020858630 8415016440204 S-RG 718020784816 8415016440207 S-LG 718020648262 8415016440209 M-XSH 718020796338 8415016440210 M-SH 718020688329 8415016440211 M-RG 718020778709 8415016440212 M-LG 718020960234 8415016440213 L-SH 718020879475 8415016440214 L-RG 718020638928 8415016440215 L-LG 718020772707 8415016440217 L-XLG 718020925523 8415016440218 XL-SH 718020959368 8415016440219 XL-RG 718020913391 8415016440220 XL-LG 718020616995 8415016440221 XL-XLG 718020849249 8415016440224 XXL-SH 718020745060 8415016440225 XXL-RG 718020971650 8415016440226 XXL-LG 718020746456 8415016440230 XXL-XLG 718020656793 8415016440232 Section C - DESCRIPTION/SPECIFICATION ITEM DESCRITION PANT, Combat, FLAME RESISTANT, Advanced (OCP) SHIRTS SHALL BE MADE IN ACCORDANCE WITH GL-PD-12-25 DATED: 08 OCTOBER 2019 PATTERN DATE: 02 September 2018 Shade standards: Interim Standard Sample Roll number 3931 will be used for matching the camouflage print. **Applicable for all Class 3, Operational Camouflage Pattern (OCP) shade evaluations only.� Current shade evaluation process remains unchanged for Class 2 Operation Enduring Freedom Camouflage Pattern (OEF-CP): Sampling:� Notwithstanding any current provisions of the fabric specification, solicitation or contract, the following shade evaluation shall apply.� Fabric pieces will be cut by the Contractor from those rolls of fabric selected by the Government Quality Assurance Representative (QAR) in accordance with the table below.� Pieces shall be 24 inches by full width for Operation Camouflage Pattern cloth. Lot Size�� No. of rolls to be Sampled 1 to 8 rolls� Each roll 9 to 25 rolls� 8 rolls 26 to 90 rolls� 20 rolls 91 to 160 rolls� 32 rolls over 160 rolls� 1 out of every 5 rolls The Government representative shall ensure that each fabric piece is cut in half.� Each half piece shall be identified with the roll number from which it was cut.� A half piece is sent to Natick for evaluation and shall be no smaller than 24"" x 30"" for OCP. Each piece shall have identifier tags securely attached and a tally list of all the rolls being evaluated shall be included. All DD1222s shall include the contract number in block 3 and vendor email addresses in Box 4 and/or 17.� The remaining pieces shall be retained at the Mill for use by the QAR. The Contractor shall send the pieces to be evaluated for shade along with a completed DD1222 to: US Army Natick Soldier RD&E Center ATTN: RDNS-SES-DT 15 General Greene Avenue Natick, MA 01760 Bldg 5 RM 122 RDNS-SEW-EWC 2 December 2014 SUBJECT:� Sampling of Fabric for Shade Evaluation Operational Camouflage Pattern (OCP) Sampling of Fabric for Shade Evaluation Operational Camouflage Pattern (OCP) Completed DD1222s shall be emailed in a Microsoft Word document to Natick at the following email addresses: rachel.l.matuszek.civ@mail.mil Shade Uniformity:� When Section 3 of the fabric specification contains a specific requirement for uniformity of shade and when the standard sample is referenced for uniformity of shade, the pieces submitted in accordance with sampling procedure above shall also be evaluated for uniformity of shade. Shade Evaluation:� If one or more of the shade pieces submitted are found unacceptable, the entire lot shall be rejected.� A lot that was rejected for shade may be screened and all rolls in the lot which were found unacceptable for shade shall be removed before such a lot is resubmitted.� Resubmitted lots shall again be subjected to the sampling and shade evaluation prescribed herein. This requirement does not negate the Contractor's responsibility to perform shade evaluation prior to submittal of a lot to the Government.� Each roll of fabric acceptable for shade from which a shade piece has been removed shall be cut by the Contractor from selvage to selvage so that there will be no evidence of the shade piece cut-out. The portion removed shall not be included in the yardage indicated on the piece ticket. If the Contractor reworks and resubmits rolls originally rejected for shade or finish, it shall not combine the rejected rolls with other lots or with lots rejected for other causes.� Such rejected rolls shall be combined to form one resubmitted lot.� Each piece shall retain its original piece number, suffixed with an ""X"".� The lot number shall also be suffixed with an ""X"". Approval: The Prime Contractor shall not cut the fabric until the fabric has been approved for shade conformance via a DD 1222, or when a lot has failed that it has been accepted under a waiver via a completed DD3440. **End of Class 3, Operational Camouflage Pattern (OCP) shade evaluation direction. Changes/Deviations to GL-PD-12-25 dated 08 October 2019: None DELETE CURRENT ""BARCODE LABEL/TAG"" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING: LABEL TAG:� EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS.� THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING.� THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER.� THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL ""UPC"" MUST APPEAR BENEATH THE CODE.� THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM. NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS. THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS: BAR CODE OMITTED OR NOT READABLE BY SCANNER HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075. IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075. ""MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE REPLACES DDD-L-20 (Ref. T0451 - June 19, 2007) INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075: PAGE 6, TABLE I, ""PHYSICAL REQUIREMENTS OF THE TYPE VI FINISHED LABEL.""� UNDER ""TEARING STRENGTH"" DELETE: ""(LB.) MINIMUM"" AND SUBSTITUTE: ""(GNS) MINIMUM."" PAGE 12, PARA 3.3.2.17, AFTER ""NSN"" ADD ""AND THE UNIVERSAL PRODUCT CODE (UPC) SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."" ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE:� THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTON AVENUE MILWAUKEE, WISCONSIN 53203 (Ref. T0795 - May 17, 2006) Section D Typical carton quantities for the ACP items are as follows: Pant 36 per box; 15 Boxes per Pallet. In cases where the order quantity in a given size is less than 36 the quantity may be lower EACH INDIVIDUAL JACKET SHALL BE PACKAGED IN A COMMERCIALLY ACCEPTABLE POLYBAG WITH A REVERSE FLAP CLOSURE Packaging shall be as per ASTM-D-3951, MIL-STD-129 with change notice 4, MIL-STD-147.Lot numbering shall be in accordance with MIL-STD-129 AND DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements dated October 2018, which has superseded DSCPM 4155.3, QUALITY SYSTEMS REQUIREMENTS, dated NOVEMBER 3, 1997. MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE DATED 18 FEBRUARY 2014 INTERIM CHANGES: OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE: THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS ""PACKING LIST HERE"" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. THE PRESERVATION,PACKAGING,PACKING AND MARKING, FOR THIS ITEM,EQUIPMENT OR SUPPLIES,SHALL BE ACCOMPLISHED UNDER THE REQUIREMENTS OF THE LATEST REVISION OF ASTM-D-3951. Packaging examination.� The fully packaged end item shall be examined for the defects listed below.� The lot size shall be expressed in units of shipping containers.� The sample unit shall be one shipping container fully packaged.� The Inspection level shall be S-2 and the AQL, expressed in terms of defects per hundred units, shall be 2.5. Examine������������� Defect Marking������� Omitted; incorrect; illegible, of (exterior)���� improper size, location, sequence & Unit Pack,�� or method of application. Materials���� Any component missing, damaged �������������� or not as specified. Workmanship���� Inadequate application of components, �������������� such as: incomplete closure of �������������� container flaps, loose strapping, �������������� improper taping, or inadequate �������������� stapling. Bulged or distorted �������������� container. Contents���� Number of intermediate containers �������������� per shipping container is more or �������������� less than required. �������������� Number of items per container is ���� ����������more or less than required. Palletization examination.� The fully packaged and palletized end items shall be examined for the defects listed below.� The lot size shall be expressed in units of palletized unit loads.� The sample unit shall be one palletized unit load, fully packaged. The Inspection level shall be S-1 and the AQL, expressed in terms of defects per hundred units, shall be 6.5. Examine�������������� Defect Finished�������� Length, width or height exceeds���������������� Dimensions ������specified maximum requirement. Palleti-�������� Pallet pattern not as specified. zation���������� Interlocking of loads not as ���������������� specified. Load not bonded with ���������������� required straps as specified. Weight���������� Exceeds maximum load limits. Marking��������� Omitted; incorrect; illegible; ���������������� of improper size, location, ���������������� sequence or method of appli- ���������������� cation. MIL-STD-147E w/CHANGE 1 23 December 2013 SUPERSEDING MIL-STD-147E 16 May 2008 DEPARTMENT OF DEFENSE STANDARD PRACTICE PALLETIZED UNIT LOADS
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/30557b766d324a3d880e46b25a3f859d/view)
- Record
- SN05553153-F 20200207/200205230147 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |