SOLICITATION NOTICE
58 -- Global Navigation Satellite System (GNSS) Simulator System
- Notice Date
- 1/16/2020 11:47:21 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334220
— Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
- Contracting Office
- NAVAIR WARFARE CTR AIRCRAFT DIV LKE JOINT BASE MDL NJ 08733 USA
- ZIP Code
- 08733
- Solicitation Number
- N6833519R0032
- Response Due
- 5/15/2019 3:00:00 PM
- Archive Date
- 05/30/2019
- Point of Contact
- William Waterhouse, Contract Specialist, Phone: 732-323-2243
- E-Mail Address
-
william.waterhouse@navy.mil
(william.waterhouse@navy.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT 02 The purpose�of this amendment�is to post question(s) / request for clarification(s) from interested vendor(s) and the Government's response(s) to same: Q1: Is this opportunity intended to be a small business set aside, or can large companies participate as well? A1: Set-Aside: Total Small Business� ����������������������������������������������������������������������������������������������������������������������������� Q2: If the GNSS equipment has to support GPS and Galileo, and transmit antennas are intended to represent specific satellite sky positions, does this not mean that there are two sets of transmit antennas - one for GPS and one for Galileo? A2: Yes ����������������������������������������������������������������������������������������������������������������������������� Q3: If Q2 is a correct assumption, how does the end user intend to change the RF cable connection from the 'GPS' transmit antenna to the 'Galileo' transmit antenna? Physical reconnection or are RF switches involved? A3: Can be either patch panel or RF switch matrix ���������������������������������������������������������������������������������������������������������������������������� Q4: For the 'single RF output' requirement, does this still involve 150ft of RF cable and an output level of -44dBm for connection to a transmit antenna, or is it for a different test purpose? A4: Yes ���������������������������������������������������������������������������������������������������������������������������� Q5a: Is the requirement for 10 user-definable antenna patterns referring to transmitter (satellite) antenna patterns, or receiver (vehicle) antenna patterns?� �If transmitter antenna patterns, we understand the requirement to mean an ability to specify one unique pattern per satellite. Is that correct? If not, please elaborate. A5a: NO ���������������������������������������������������������������������������������������������������������������������������� Q5b: If receiver antenna patterns, we understand the requirement to mean an ability to select / switch between (up to) 10 patterns for the one vehicle antennas. Is that correct? If not, please elaborate. A5b: Yes ����������������������������������������������������������������������������������������������������������������������������� Q6: Is the 20A current limit to do with normal operation conditions, or maximum ratings? A6: 20A breaker ���������������������������������������������������������������������������������������������������������������������������� Q7: Is the supplied system required to be provided in 19"" rack(s)? A7: Yes
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/482f6c4202284806a14968576949acc8/view)
- Place of Performance
- Address: See Statement of Work, USA
- Country: USA
- Country: USA
- Record
- SN05537287-F 20200118/200116230142 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |