SOLICITATION NOTICE
66 -- Flash Point Analyzeer
- Notice Date
- 9/23/2019
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W91ZLK) TENANT CONTRACTING DIV, 6565 Surveillance Loop, Building 6001, Aberdeen Proving Ground, Maryland, 21005-1846, United States
- ZIP Code
- 21005-1846
- Solicitation Number
- W91ZLK-19-R-0091
- Archive Date
- 10/11/2019
- Point of Contact
- Tyce L. Rucks, Phone: 4438614733, David A. Humfleet,
- E-Mail Address
-
tyce.l.rucks.civ@mail.mil, david.a.humfleet.civ@mail.mil
(tyce.l.rucks.civ@mail.mil, david.a.humfleet.civ@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Solicitation W91ZLK-19-R-0091 This is a solicitation for commercial items prepared in accordance with FAR Part 12, Acquisition of Commercial Items, FAR Part 13, Simplified Acquisition Procedures and as supplemented with additional information included in this notice. This solicitation will utilize simplified procedures for soliciting competition, evaluation, award documentation and notification that comply with FAR 13.1. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is issued as a request for quotation (RFQ). The solicitation number is W91ZLK-19-R-0091. It is the Government's intent to award a firm-fixed-price purchase order. This requirement is set-aside 100% for small businesses; all qualified Contractors are encouraged to submit a quote. It is the contractor's responsibility to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses https://acquisition.gov/far/index.html and http://farsite.hill.af.mil/vmfara.htm. The NAICS code is 334516, with a small business size of 1,000 employees. The Army Contracting Command - Aberdeen Proving Ground (ACC-APG) on behalf of the US Army Aberdeen Test Center (ATC) is seeking Contractors to provide 1 Eralytics ERAFlash Flash Point Analyzer in accordance with the attached specifications listed in the Request for Quote (RFQ). The Contractor shall specify delivery date estimates after receipt of order, unit prices, extended prices and commercial warranties with quote submissions. Quotes shall specifically address each requirement listed on this document. Partial quotes will NOT be evaluated by the Government. All equipment WITHOUT EXCEPTION must be new and any manufacturer's warranty information must be included. All submissions must be BAA Compliant and clearly annotated on the quotation. Delivery will be made FOB Destination to: USA ABERDEEN TEST CENTER BLDG 358 MICHAELVILLE ROAD ATTN: Mark Michie (ATC) ABERDEEN PROVING GROUND MD 21005-5059 This is a Brand Name or Equal acquisition. In accordance with FAR Provision 52.211-6, Brand Name or Equal, if an equal item is offered, it is the responsibility of the Offeror to demonstrate that the product offered as equal meets or exceeds the brand name item. Failure to do so will result in the offered product being deemed technically unacceptable removed from consideration for award. Award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors in accordance with FAR 15.101-2. The order will be awarded to the Lowest Price Technically Acceptable (LPTA) offer. The technical evaluation will be a determination based upon information provided by the Contractor. The Government is not responsible for locating or securing any information which is not identified in the offer. The Government reserves the right to make award without discussions. Quotations and Attachments must be dated and received by US Army Contracting Command, Aberdeen Proving Ground, Tenant Division, Technologies Branch 6001 Combat Drive, 2nd Floor, Room C2-101, Aberdeen Proving Ground, MD, 21005-1846, Attention Ms. Tyce Rucks, Contract Specialist, via email at tyce.l.rucks.civ@mail.mil NLT Thursday, 26 September 2019 at 2:00 PM EST. Late submissions will not be evaluated. All quotations from responsible sources will be fully considered. Contractors who are not registered in the System for Award Management (SAM) database prior to award will not be considered. Contractors may register with SAM by calling 1-866-606-8220 or online at https://www.sam.gov or through the Federal Service Desk at http://www.FSD.gov. QUESTIONS: For questions concerning this Request for Quotation contact Ms. Tyce Rucks via email at tyce.l.rucks.civ@mail.mil. Please provide any questions NLT Tuesday, 25 September 2019 at 4:00 PM EST. NO TELEPHONE REQUESTS WILL BE HONORED. SPECIFICATIONS FOR Eralytics ERAFLASH Requirement: To acquire a state of the art Eralytics ERAFLASH flash point analyzer that provides maximum performance and versatility for an environment with ever changing requirements with the system configuration described below. Manufacturer will have at least 10 years of experienced manufacturing and testing all types of vehicle lubricant samples. Must have or be familiar with labs that are accredited ISO 17025 (ATC lab is accredited in oils analysis) in order to meet the specifications of requested instrumentation. Flash Point Analyzer WILL MEET THE FOLLOWING SPECIFICATIONS: *Meets ASTM D7094 and D6450 standards correlating to ASTM D93, ASTM D56, ISO 2719, DIN 51758, IP 34, JIS K2265, ISO 13736, IP 170, ISO 3679, ISO 3680, and ASTM D3828. • Sample volume is only 2ML • Must cover test temperature range -25C to 420C •Automatic fuel dilution measurement for the analysis of used engine oils •Contains peltier boost technology (PBT) improving the instrument lifecycle • Temperature stability 0.1C •Contains contamination prevention technology (CPT) for improved sample throughput •Analyses 12 sample per hour • Visualizes Combustion graphics measurement procedure on screen • Stores over 100,000 detailed test reports in internal memory • In-situ calibration without need for dismantling the instrument •Electrical specifications: auto switching 85-264 V AC, 47-63 Hz, 150 watts, 12V DC •Benchtop size requirement of 11.4 inch x 13.8 inch x 13.4 inch
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/b5eb8d184c4da26c1f34bcf383edb292)
- Record
- SN05455690-W 20190925/190923231208-b5eb8d184c4da26c1f34bcf383edb292 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |