Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 21, 2019 FBO #6509
MODIFICATION

16 -- CYLINDER ASSEMBLY - Solicitation 1

Notice Date

9/19/2019
 

Notice Type

Modification/Amendment
 

NAICS

336413 — Other Aircraft Parts and Auxiliary Equipment Manufacturing
 

Contracting Office

Department of the Air Force, Air Force Materiel Command, PK/PZ Tinker AFB, 3001 Staff Drive, Ste 1AG76A, Tinker AFB, Oklahoma, 73145-3015, United States
 

ZIP Code

73145-3015
 

Solicitation Number

FA8118-19-R-0058
 

Archive Date

12/11/2019
 

Point of Contact

Eric Romero, Phone: 4057365555
 

E-Mail Address

eric.romero.11@us.af.mil
(eric.romero.11@us.af.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

TRANSPORTATION SPECIAL PACKAGING INSTRUCTIONS NSN 1680-01-185-0838RK SPECIAL PACKAGING INSTRUCTIONS NSN 1680-01-184-8665RK SPECIAL PACKAGING INSTRUCTIONS NSN 1680-01-182-6326RK PACKAGING ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST EXHIBIT- CDRL DID 81995 DID 81838 DID 81634C DID 80969 DID 80503 DID 80441C CAVAF REPORTING REQUIREMENTS ATTACHMENT 1 - GOVERNMENT FURNISHED ATTACHMENT - STATEMENT OF WORK SOLICITATION FA811819R0058 SOLICITATION ISSUE DATE 19 SEPTEMBER 2019; CLOSE DATE 21 OCTOBER 2019 3:00 PM CST. (These dates are subject to change). The solicitation for proposals will be posted to FBO and attached to this synopsis when it is issued. NOTE: The resulting contract will not be effective until on or after 11 November 2019. All questions regarding this notice and requirement are to be submitted in writing via E-mail or Fax to the point(s) of contact specified herein. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Offerors must specify whether they are a U.S. or foreign-owned firm. Written responses are required. This is a Total Small Business Set Aside requirement. The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating to procure B-1 BUNGEE CYLINDER ASSEMBLIES NSNs 1680-01-226-6249, 1680-01-160-7171, 1680-01-204-1966, 1680-01-204-1964, 1680-01-265-8447, 1680-01-342-7689, 1680-01-185-0838, 1680-01-184-8665, 1680-01-184-8663, 1680-01-184-8666, 1680-01-182-6326, 1680-01-183-5193, 1680-01-179-3886, 1680-01-161-1492 and 1680-01-184-8667. The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture, test, packing, preservation and packaging of the B-1 Bungee Cylinder Assemblies. The work encompasses the disassembly, cleaning, inspection, maintenance, reassembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments. A Firm Fixed Price, Indefinite Delivery Requirements type contract with a one (1) year basic period and four (4) one (1) year options is contemplated. In accordance with FAR 22.10003-6(a)(1), this remanufacture shall be deemed to be manufacturing. As such, this will be considered as a "supply" type acquisition. The requirements set forth in this notice are defined per Purchase Request FD2030-19-01304 as follows: Nomenclature/Noun: CYLINDER ASSEMBLY TO Numbers: 00-5-1, 00-5-3 and 00-35D-54 Line Item 0001: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680012658447RK; P/N: L5228091-011. RMC / RMSC: R1 / C NAICS: 336413 Function: The Bungee Artificial Feel Pitch Control stores a release energy. Dimensions: Length 14.00 in. Width 3.00 in. Height 3.00in. Weight 2.50 lbs. Material: ALUMINUM; STEEL Quantity: BEQ 4 EACH per year Delivery: 2 each every 60 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0002: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680013427689RK; P/N: L5228101-011. RMC / RMSC: R1 / C NAICS: 336413 Function: It is a large spring that reduces the shock to the flight controls. The Nonlinear Pitch Control Centering Bungee Assembly stores and releases energy at a linear rate in direct proportion to spring deflection. Dimensions: Length 15.50 in. Width 3.00 in. Height 3.00in. Weight 2.60 lbs. Material: ALUMINUM; STEEL Quantity: BEQ 3 EACH per year Delivery: 2 each every 60 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0003: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011850838RK; P/N: L5228121-001. RMC / RMSC: R1 / C NAICS: 336413 Function: Bungee Assembly Override Nonlinear Pitch Control stores and releases energy at a linear rate in direct proportion to the increase or decrease of the bungee spring deflection. Dimensions: Length 34.50 in. Width 3.50 in. Height 3.50 in. Weight 10.08 lbs. Material: ALUMINUM; STEEL Quantity: BEQ 15 EACH per year Delivery: 2 each every 60 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0004: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011848667RK; P/N: L5238081-001 RMC / RMSC: R2 / C NAICS: 336413 Function: Bungee Assembly, Centering, Spoiler Control is a single-acting, single-rate, pull type unit. Dimensions: Length 22.00 in. Width 3.50 in. Height 3.50 in. Weight 9.50 lbs. Material: STEEL ALLOY, ALUMINUM ALLOY Quantity: BEQ 3 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0005: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011848666RK; P/N: L5238071-001 RMC / RMSC: R2 / C NAICS: 336413 Function: Bungee Assembly, Centering, Spoiler Control is a single-acting, single-rate, pull type unit. Dimensions: Length 15.50 in. Width 3.50 in. Height 3.50 in. Weight 6.50 lbs. Material: STEEL ALLOY, ALUMINUM ALLOY Quantity: BEQ 5 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0006: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011848665RK; P/N: L5228141-001 RMC / RMSC: R1 / C NAICS: 336413 Function: Main Landing Gear Uplock Bungee Assy Is A Single-Acting, Single Rate, Push Type Unit. Dimensions: Length 27.00 in. Width 3.00 in. Height 3.00 in. Weight 5.00 lbs. Material: PREDOMINANT MATERIAL IS ALUMINUM ALLOY Quantity: BEQ 15 EACH per year Delivery: 6 each every 60 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0007: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011848663RK; - P/N: INPUT L5238061-031 OUTPUT - P/N: L5238061-041 NSN: 1680011848663RK; - P/N: INPUT L5238061-041 OUTPUT - P/N: L5238061-041 RMC / RMSC: R2 / C NAICS: 336413 Function: The Bungee Artificial Feel Pitch Control stores and releases energy. It is a double-acting, single-rate Type I extends or retracts. This type is primarily used for artificial feel. Dimensions: Length 14.00 in. Width 2.50 in. Height 2.50 in. Weight 2.00 lbs. Material: ALUMINUM ALLOY, STEEL ALLOY Quantity: BEQ 3 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0008: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011835193RK; P/N: L5248031-001 RMC / RMSC: R2 / C NAICS: 336413 Function: Bungee Assembly Overload Yaw Control, SCAS Control stores and releases energy. It is a double-acting single rate type which extends or retracts. The bungee absorbs excess input forces, and protects mechanical linkage. Dimensions: Length 22.50 in. Width 3.00 in. Height 3.00 in. Weight 4.82 lbs. Material: ALUMINUM, STEEL Quantity: BEQ 8 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0009: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011826326RK; P/N: L5248021-001 RMC / RMSC: R2 / C NAICS: 336413 Function: Bungee Assembly Overload Yaw Control stores and releases energy at a linear rate that is in direct proportion to the increase or decrease of the spring deflection. Dimensions: Length 23.50 in. Width 2.00 in. Height 2.00 in. Weight 4.00 lbs. Material: STEEL ALLOY, ALLUMINUM ALLOY Quantity: BEQ 4 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0010: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011611492RK; P/N: L5228001-001 RMC / RMSC: R1 / C NAICS: 336413 Function: Used in control systems for overriding or holding a mechanism over center and can also be used for returning a control after it has been operated. Dimensions: Length 9.25 in. Width 3.00 in. Height 4.25 in. Weight 1.50 lbs. Material: ALUMINUM; STEEL Quantity: BEQ 4 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0011: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011607171RK; P/N: L5208011-001 RMC / RMSC: R2 / C NAICS: 336413 Function: Maintains a nearly constant preset cable tension by compensating for changes due to temperature variations and structural deflections of the fuselage. Dimensions: Length 29.00 in. Width 3.00 in. Height 3.00 in. Weight 5.00 lbs. Material: STEEL ALLOY, ALUMINUM ALLOY Quantity: BEQ 3 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0012: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680011793886RK; P/N: L3300058-011 RMC / RMSC: R2 / C NAICS: 336413 Function: Acts as a stop and prevents the main landing gear from retracting beyond the required travel position. Dimensions: Length 4.00 in. Width 1.50 in. Height 1.50 in. Weight 1.10 lbs. Material: STEEL AND ALUMINUM ALLOY Quantity: BEQ 2 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0013: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680012266249RK; P/N L3400092-001 RMC / RMSC: R1 / C NAICS: 336413 Function: The Bungee Assembly, Wheel Door Spin Stop, Nose Landing Gear stores and releases energy in direct proportion to the increase or decrease of the spring deflection. It is a single-acting, single-rate, push type unit. Dimensions: Length 15.00 in. Width 2.00 in. Height 2.00 in. Weight 3.00 lbs. Material: ALUMINUM ALLOY, STEEL ALLOY Quantity: BEQ 8 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0014 : Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680012041964RK; P/N L5228041-011 RMC / RMSC: R1 / C NAICS: 336413 Function: Bungee Assembly, Override Roll Control is a double-acting, single-rate type which stores and releases energy at a linear rate in proportion to the increase or decrease of the bungee spring deflection. Dimensions: Length 24.00 in. Width 3.00 in. Height 3.00 in. Weight 3.65 lbs. Material: ALUMINUM, STEEL Quantity: BEQ 6 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Line Item 0015: Remanufacture of B-1 Bungee Cylinder Assembly; NSN: 1680012041966RK; P/N L5228031-011 RMC / RMSC: R1 / C NAICS: 336413 Function: The Bungee Assembly, Centering, Pitch and Roll Control stores and releases energy. It is a double-acting, single-rate that extends or retracts. This type is primarily used for centering the pitch and roll control. Dimensions: Length 17.00 in. Width 3.00 in. Height 3.00 in. Weight 2.50 lbs. Material: ALUMINUM ALLOY, STEEL ALLOY Quantity: BEQ 3 EACH per year Delivery: 1 each every 30 days after receipt of funded order and repairable assets. Early delivery is acceptable. Shipping: Ship to SW3211, DLA Distribution Depot Oklahoma, 3301 F Ave Cen Rec Bldg 506 Dr 22, Tinker AFB, OK 73145-8000. UID: UID requirements will apply. Line Item 0016: Over and Above Work - To Be Negotiated Line Item 0017: Data in accordance with DD Form 1423-1 - Not Separately Priced History: Contract Number: FA8118-16-D-0006; Award Date: 12 Nov 2015, FA8118-19-D-0002 Award Date: 5 Nov 2018 and FA8118-18-D-0011Award Date: 18 Dec 2017. Qualification Requirements: Qualification Requirements DO apply. Initial Production Evaluation (IPE) may be required. QRs are available at: https://www.fbo.gov/index?s=opportunity&mode=form&id=2a1ac5229189ec14e60269ef40e5c3d4&tab=core&_cview=0) Current approved small business sources include: Maney Aircraft Inc Cage Code 10000 Sunvair Cage Code 7QYD4 Texas Aerospace Services Cage Code 29242 Thomas Instrument Cage Code 5H860 All responsible sources may submit a proposal which shall be considered by the agency. Set-aside: This requirement is a 100% Small Business Set-Aside for the remanufacture of the B-1 Bungee Cylinder Assemblies, NSNs: 1680-01-226-6249, 1680-01-160-7171, 1680-01-204-1966, 1680-01-204-1964, 1680-01-265-8447, 1680-01-342-7689, 1680-01-185-0838, 1680-01-184-8665, 1680-01-184-8663, 1680-01-184-8666, 1680-01-182-6326, 1680-01-183-5193, 1680-01-179-3886, 1680-01-161-1492 and 1680-01-184-8667. Quality Assurance Provisions and Special Inspection Requirements: Higher-level contract quality requirements are used in ADDITION to a standard inspection requirement. A quality system compliant with AS9100, ISO 9001: 2008 or equivalent is acceptable. Compliance is demonstrated by certification or third party audit findings, such as from a DCMA QMS audit. Electronic procedures will be used for this solicitation. Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/FA8118-19-R-0058 /listing.html)
 

Place of Performance

Address: Tinker Air Force Base, Tinker, Oklahoma, 73145, United States

Zip Code: 73145
 

Record

SN05451477-W 20190921/190919231041-920728c3ad546f33a4a879d35907768b (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |