Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 11, 2019 FBO #6470
SOURCES SOUGHT

71 -- 691-19-3-5064-0058 DIGNITY2 CHAIRS DOM GROUP ROOM (VA-19-00078616)

Notice Date

8/9/2019
 

Notice Type

Synopsis
 

NAICS

337214 — Office Furniture (except Wood) Manufacturing
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office 22;4811 Airport Plaza Drive;Suite 600;Long Beach CA 90815
 

ZIP Code

90815
 

Solicitation Number

36C26219Q1159
 

Response Due

8/19/2019
 

Archive Date

9/8/2019
 

Point of Contact

Mayra.Barbosa@va.gov
 

Small Business Set-Aside

N/A
 

Description

THIS REQUEST FOR INFORMATION (RFI) 36C26219Q1159 -IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. SOURCES SOUGHT DESCRIPTION This is NOT a solicitation announcement. This is a source sought/RFI for market research only. The purpose of this source sought/RFI is to gain knowledge of potential qualified sources and their size classification relative to NAICS 337214 (size standard is 1,000 Employees). Responses to this source sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this source sought, a solicitation announcement may be published. Responses to this source sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Network Contracting Office, is seeking sources that can provide Spec Mental Health Furniture that at a minimum meets the following salient characteristics for the VA West Los Angeles Healthcare System: LINE ITEM DESCRIPTION UNIT QUANTITY UNIT PRICE AMOUNT 0001 4601M Dignity2 medium back, no arms, laminate panel inside and out, poly arm caps RAL 7006 Taupe Seat: Momentum Beeline Nimbus (1) Back: Momentum Beeline Nimbus (1) Frame colour: Paint - Deep Taupe Lam WA 7960K-18 Studio Teak NOTE: This chair comes with perforated metal gap plate between the seat and back. This chair will also come with (4) floor mount glides EA 40     0002 4601G Dignity2 Bariatric, no arms, laminate panel inside and out, poly arm caps RAL 7006 Taupe Seat: Momentum Beeline Nimbus (1), Back: Momentum Beeline Nimbus (1), Frame colour: Paint - Deep Taupe Lam WA 7960K-18 Studio Teak*** NOTE: This chair comes with perforated metal gap plate between the seat and back. This chair will also come with (4) floor mount glides EA 8     0003 4602M Dignity2 2-seat medium back, no arms, laminate panel inside and out, poly arm caps RAL 7006 Taupe Seat: Momentum Beeline Nimbus (2), Back: Momentum Beeline Nimbus (2), Frame colour: Paint - Deep Taupe Lam WA 7960K-18 Studio Teak*** NOTE: This chair comes with perforated metal gap plate between the seat and back. This chair will also come with (4) floor mount glides EA 8     0004 Oval drum table: 30 in. deep x 36 in. long 18 in. high Base finish: Lam WA 7960K-18 Studio Teak***, Top Surface: Lam WA 7960K-18 Studio Teak*** Edge: Self Edge, radiused corners NOTES: Heavy Duty with tamper proof hardware. EA 8     0005 Hardi Lounge chair, armless (8801) Spectone Finish: RAL 7015 EA 20     0006 Hardi Lounge chair, with arms (8808) Spectone Finish: RAL 7015 EA 20     0007 Hardi Rocker chair (8840) Spectone Finish: RAL 7015 EA 15     0008 Hardi Stool (8901) Spectone Finish: RAL 7015 EA 15     0009 Square table: 42 in. x 42 in. deep 27 to 35 in. high 1 ED Psych Waiting Areas -Tubular X base, crank adjustable (X-CRADJ), Base: Paint -Silver, Top Surface: Lam Corian Designer White Edge: Corian Flat edge EA 7     0010 Square table: 42 in. x 42 in. deep 29 in. high 1 ED Psych Waiting Areas 8 $ 2,506.22 $ 20,049.76 1-Manhattan X4 base (MNX4),, Base: Paint - Silver, Top Surface: Lam Corian Designer White Edge: Corian Flat edge EA 7     TOTAL $ - Include shipping cost on the items price. Vendor Requirements: Vendor shall provide delivery 30 days after receipt of order or sooner. Vendor shall provide manufacture standard warranty on the product starting from the first day of delivery. Vendor shall quote all line items listed above. STATEMENT OF WORK This project is part of the Department of Veterans Affairs Greater Los Angeles Veterans Health Care System Located at: 11301 Wilshire Blvd., Los Angeles, CA 90073 INTRODUCTION This is a Firm Fixed-Price Contract Order to provide Dignity Mental Health Furniture to the VA West Los Angeles Healthcare System. SCOPE OF WORK: This statement of work (SOW) describes the requirement for the need of Dignity Mental Health Furniture to accommodate patients but also to replace furniture that is worn, broken and beyond warranty and repair, as well as additional ordered to keep in stock at the VA West Los Angeles Healthcare System. PRODUCT DESCRIPTION Spec Dignity2 Chair Model: 4501M-N Dignity, Single Seat, Armless Salient Characteristics: Overall average measurements: 28.50 W x 30 D x 31.75 H Seat minimum: 23 W x 18 H Arm minimum: 17.50 H Polyurethane arms: Taupe Poly Metal frame: Deep Taupe Weight: Standard Seat: Momentum, Beeline, Nimbus Sides Interior/Exterior: Laminate, Studio Teak Eliminated pass-through between the seat and back. Polyurethane perimeter arms Laminate or upholstered side panels Exceeds BIFMA Seating Durability Test of 500lbs Separate seat and back Heavy duty steel inner frame Tamperproof fasteners Frames: Steel and plywood No protruding hardware Arm Panels- Laminate Inside and Outside The seat and back are separated, but the pass-through can be eliminated with the metal panel attached to the underside of the seat and back. Exceeds BIFMA Seating Durability Test of 500lbs Upholstery fabrics are 100% Polyurethane and 55% TPE, 35% Polyester and 10% Cotton Upholstery fabrics are minimum of 500,000 D.R. Foam provided meets Federal Motor Vehicle Standard MCSS302 and California Bulletin No. 117 (TB117-2013) Feet are finished with non-removable 1 1/8 steel levelers with a ¼- 20 steel stem Upholstered 3/8" foam is glued to 1/2" plywood. The panel is glued to a polyurethane frame and the fasteners are concealed. Lifetime Structural Warranty   15.16% Post-Consumer Recycled Content 5.89% Pre-Consumer Recycled Content 85.72% Recyclable Level 2 certified Design intent: (Item photographed is just to provide guidance) Spec Dignity2 Bariatric Chair Model: 4501G-N Dignity, Single Seat, armless Salient Characteristics: Overall average measurements: 36.50 W x 30 D x 31.75 H Seat minimum: 31 W x 18 H Arm minimum: 17.50 H Polyurethane arms: Taupe Poly Metal frame: Deep Taupe Weight: Standard Seat: Momentum, Beeline, Nimbus Sides Interior/Exterior: Laminate, Studio Teak Eliminated pass-through between the seat and back. Polyurethane perimeter arms Laminate or upholstered side panels Exceeds BIFMA Seating Durability Test of 500lbs Separate seat and back Heavy duty steel inner frame Tamperproof fasteners Frames: Steel and plywood No protruding hardware Arm Panels- Laminate Inside and Outside The seat and back are separated, but the pass-through can be eliminated with the metal panel attached to the underside of the seat and back. Exceeds BIFMA Seating Durability Test of 500lbs Upholstery fabrics are 100% Polyurethane and 55% TPE, 35% Polyester and 10% Cotton Upholstery fabrics are minimum of 500,000 D.R. Foam provided meets Federal Motor Vehicle Standard MCSS302 and California Bulletin No. 117 (TB117-2013) Feet are finished with non-removable 1 1/8 steel levelers with a ¼- 20 steel stem Upholstered 3/8" foam is glued to 1/2" plywood. The panel is glued to a polyurethane frame and the fasteners are concealed. Lifetime Structural Warranty   15.16% Post-Consumer Recycled Content 5.89% Pre-Consumer Recycled Content 85.72% Recyclable Level 2 certified Design intent: (Item photographed is just to provide guidance) Spec Dignity2 Bariatric Chair Model: 4602M-N Dignity, Two Seater, armless Salient Characteristics: Overall average measurements: 51 W x 30 D x 31.75 H Seat minimum: 45 W x 18 H Arm minimum: 17.50 H Polyurethane arms: Taupe Poly Metal frame: Deep Taupe Weight: Standard Seat: Momentum, Beeline, Nimbus Sides Interior/Exterior: Laminate, Studio Teak Eliminated pass-through between the seat and back. Polyurethane perimeter arms Laminate or upholstered side panels Exceeds BIFMA Seating Durability Test of 500lbs Separate seat and back Heavy duty steel inner frame Tamperproof fasteners Frames: Steel and plywood No protruding hardware Arm Panels- Laminate Inside and Outside The seat and back are separated, but the pass-through can be eliminated with the metal panel attached to the underside of the seat and back. Exceeds BIFMA Seating Durability Test of 500lbs Upholstery fabrics are 100% Polyurethane and 55% TPE, 35% Polyester and 10% Cotton Upholstery fabrics are minimum of 500,000 D.R. Foam provided meets Federal Motor Vehicle Standard MCSS302 and California Bulletin No. 117 (TB117-2013) Feet are finished with non-removable 1 1/8 steel levelers with a ¼- 20 steel stem Upholstered 3/8" foam is glued to 1/2" plywood. The panel is glued to a polyurethane frame and the fasteners are concealed. Lifetime Structural Warranty   15.16% Post-Consumer Recycled Content 5.89% Pre-Consumer Recycled Content 85.72% Recyclable Level 2 certified Design intent: (Item photographed is just to provide guidance) Spec Elliptical Drum Base Model: OVALHD Salient Characteristics: Laminate: Studio Teak Metal Plinth Base: Deep Taupe Overall average measurements: 42 W x 42 D x 29 H Base: Paint - Standard Textured Spectone Finish TBA, Top Surface: Lam Corian TBA, please specify the finish when ordering Edge: Corian Bullnose edge Notes: Corian Grade A/B open market Contributes to LEED Manufactured in the USA Minimum of 60.61% recyclable materials Minimum of 23.08% recycled content Design intent: (Item photographed is just to provide guidance) Spec Hardi Chair Model: 8801- Behavioral Health Lounge Chair Salient Characteristics: Overall average measurements: 26 W x 27 D x 29.50 H Seat minimum: 23 W x 17.25 H Content: Molded polyethylene Very durable Anti-ligature CAL 133 Compliant One piece construction Easy to clean Spectone Finish: RAL 7015 Standard Weight (fillable with sand) Design intent: (Item photographed is just to provide guidance) Spec Hardi Chair Model: 8808- Behavioral Health Lounge Chair with Arms Salient Characteristics: Overall average measurements: 27 W x 27 D x 29.50 H Seat minimum: 23 W x 17.25 H Arm minimum: 25 H Content: Molded polyethylene Very durable Anti-ligature CAL 133 Compliant One piece construction Easy to clean Spectone Finish: RAL 7015 Standard Weight (fillable with sand) Design intent: (Item photographed is just to provide guidance) Spec Hardi Rocker Model: 8840- Behavioral Health Rocker Salient Characteristics: Overall average measurements: 28 W x 33.75 D x 37.50 H Seat minimum: 20 W x 18.25 H Arm minimum: 25 H Content: Molded polyethylene Very durable Anti-ligature CAL 133 Compliant One piece construction Easy to clean Spectone Finish: RAL 7015 Standard Weight (fillable with sand) Design intent: (Item photographed is just to provide guidance) Spec Hardi Stool Model: 8901- Behavioral Health Stool Salient Characteristics: Overall average measurements: 17.50 W x 17.50 D x 18 H Seat minimum: 16 W x 18 H Content: Molded polyethylene Very durable Anti-ligature CAL 133 Compliant One piece construction Easy to clean Spectone Finish: RAL 7015 Standard Weight (fillable with sand) Design intent: (Item photographed is just to provide guidance) Square table: Crank Adjustable Spec Crank Height Adjustable table with Tubular X base Salient Characteristics: Overall average measurements: 42 W x 42 D x 29 H 1-Tubular X base, crank adjustable Base: Paint - Standard Textured Spectone Finish Silver or equal to Top Surface: Lam Corian, Designer White Edge: Corian Flat edge Contributes to LEED Manufactured in the USA Minimum of 60.61% recyclable materials Minimum of 23.08% recycled content Design intent: (Item photographed is just to provide guidance) Square table: Fixed Height Spec Fixed Height table with Manhattan X base Salient Characteristics: Overall average measurements: 42 W x 42 D x 29 H Manhattan X base, fixed Base: Paint - Standard Textured Spectone Finish Silver or equal to Top Surface: Lam Corian, Designer White Edge: Corian Flat edge Contributes to LEED Manufactured in the USA Minimum of 60.61% recyclable materials Minimum of 23.08% recycled content Design intent: (Item photographed is just to provide guidance) Level 2 certified 4.0 QUANTITIES The quantities of each item are listed as noted below. Awarded vendor shall include purchase order number on all shipping labels to include contents. ITEM DESCRIPTION UNIT QUANTITY 0001 Dignity2 chairs- 4601M-N Polyurethane arms: Taupe Poly Metal frame: Deep Taupe Weight: Standard Seat: Momentum, Beeline, Nimbus Sides Interior/Exterior: Laminate, Studio Teak EA 40 0002 Dignity2 chairs- 4601G-N Polyurethane arms: Taupe Poly Metal frame: Deep Taupe Weight: Standard Seat: Momentum, Beeline, Nimbus Sides Interior/Exterior: Laminate, Studio Teak EA 8 0003 Dignity2 Loveseat- 4601M-N Polyurethane arms: Taupe Poly Metal frame: Deep Taupe Weight: Standard Seat: Momentum, Beeline, Nimbus Sides Interior/Exterior: Laminate, Studio Teak EA   8 0004 Elliptical Drum Base- OVALHD 42 W x 42 D x 29 H Laminate: Studio Teak Metal Base: Deep Taupe EA   8 0005 Hardi 8801 Lounge Chair Standard weight (fillable with sand) Spectone Finish: RAL 7015 EA   20 0006 Hardi 8808 Lounge Chair with arms Standard weight (fillable with sand) Spectone Finish: RAL 7015 EA   20 0007 Hardi 8840 Rocker Standard weight (fillable with sand) Spectone Finish: RAL 7015 EA   15 0008 Hardi 8901 Stool Standard weight (fillable with sand) Spectone Finish: RAL 7015 EA   15 0009 Square table: Crank Adjustable Overall: 42 W x 42 D x 29 H 1-Tubular X base, crank adjustable (X-CRADJ) Solid Surface Top: Lam Corian, Designer White EA   7 0010 Square table: Fixed Height Overall: 42 W x 42 D x 29 H Manhattan X base, fixed Solid Surface Top: Lam Corian, Designer White EA   7 PERIOD OF PERFORMANCE The Period of Performance is for 60 days After Receipt of Order (ARO). DELIVERY GLA Interior Designer will coordinate the delivery date and time with the selected vendor. Delivery of product will come all at once unless otherwise instructed and will be delivered to: 11301 Wilshire Blvd, B297, Los Angeles, CA 90073 will be required in 60 days after receipt of order. Items will be Drop Ship only. Duty hours will be 8:00am-12:00pm. The Government recognized US holidays are: New Year s Day, Martin Luther King, Jr. Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day and Christmas Day. If the holiday falls on Sunday, it is observed on Monday. Coordinate all products and services to order, ship, and deliver new furniture from the manufacturer until final acceptance by the COR. Vendor shall deliver materials to job in manufacturer's original sealed containers with brand name marked thereon. Vendor shall package to prevent damage or deterioration during shipment, handling, and storage. Vendor shall store products in dry condition inside enclosed facilities. All delayed delivery arrangements, within 60 days, shall be at no additional cost to the Government. INSTALLATION This requirement does not require an installation. WARRANTY All furniture shall be covered under standard warranty from the first day of delivery. VENDOR FURNISHED ITEMS AND RESPONSIBILITIES The selected vendor shall furnish all items as described in the statement of work. Do not use VA dumpsters for disposal of scrap/waste without prior VA approval. The contractor shall be responsible for providing any sample materials for awarded product (2-Day Delivery) if requested by VA Interior Designer. The product must not be placed into production without clearance from the VA COR. The contractor shall track manufacturing schedule and notify VA Interior Designer with updates of estimated completion date by email. The contractor shall provide 30 days free storage. The Contractor shall provide a point of contact. INSPECTION AND ACCEPTANCE The Interior Designer or Contracting Officer Representative (COR) shall inspect the delivery and sign off of any and all missing or damaged products in the form of a delivery manifest, vendor provided. The Interior Designer or Contracting Officer Representative (COR) shall ensure all delivery of merchandise is completed and received satisfactorily prior to acceptance. Disputes shall be resolved by the Contracting Officer. INTERFERENCE TO NORMAL FUNCTION The selected vendor may be required to interrupt their work at any time so as not to interfere with the normal functioning of the facility, including utility services, fire protection systems, and passage of facility patients, personnel, equipment and carts. In the event of an emergency, work performance may be stopped and rescheduled at no additional cost to the government. The selected vendor s personnel shall inform the Interior Designer or the designee of the need to gain access to secured areas. If access is required to secure areas, prearranged scheduling will be made with Interior Designer The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested and are capable of providing the sought-out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicates the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hub zone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer or distributor of the items being referenced above (or equivalent product/solution)? What is the manufacturing country of origin of these items? (4) If you re a small business and you are an authorized distributor/reseller for the items identified above (or equivalent product/solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (5) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract type and number. (6) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions available on your schedule/contract? (7) Please provide general pricing for your products/solutions for market research purposes. (8) Please submit your capabilities in regard to the salient characteristics being provided and any information pertaining to equal to items to establish capabilities for planning purposes? *** Submissions addressing Section (8) should show clear, compelling and convincing*** evidence that all equal to items" meet all required salient characteristics. Responses to this notice shall be submitted via email to Mayra.Barbosa@va.gov. Telephone responses shall not be accepted. Responses must be received no later than Monday, 19 August 2019 at 11:00 AM Pacific Time. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation. Please reference 36C26219Q1159, SPEC Mental Health Furniture. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (09-AUG-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
 

Web Link

Link To Document
(https://www.fbo.gov/spg/VA/LBVANBC/VAMD/36C26219Q1159/listing.html)
 

Place of Performance

Address: VA Los Angeles Healthcare System;11301 Wilshire Blvd;Warehouse Building 297;Los Angeles, CA

Zip Code: 90073

Country: USA
 

Record

SN05399746-F 20190811/190809230018 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |