SOLICITATION NOTICE
J -- Steel Camel Repair
- Notice Date
- 4/24/2019
- Notice Type
- Combine Synopsis/Solicitation
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- N00189 NAVSUP Fleet Logistics Center Norfolk 1968 Gilbert Street,Suite 600 NORFOLK, VA
- ZIP Code
- 23511
- Solicitation Number
- N0018919Q0218
- Point of Contact
- Charlie 757-443-1363
- Small Business Set-Aside
- Total Small Business
- Description
- In support of Submarine Camels NORF 001 and 002, provide the following: Line Item 1 Trapezoidal Fenders o Trapezoidal Fender Per Drawing 5404005 Rev B (see attached) Proposed Modification (1): Add QTY (4) additional bolt holes and access holes Proposed Modification (2): Increase bolt hole size to Dia 1- to accommodate 1 -1/4 bolts o Fender Washer Plate Per Drawing 5404007 Rev B (see attached) Proposed Modification (1): Add QTY (4) additional bolt holes Proposed Modification (2): Increase bolt hole size to Dia 1- to accommodate 1 -1/4 bolts Proposed Modification (3): Increase material thickness to o Necessary mounting hardware for Trapezoidal Fenders per BOM on Drawing 5421000 with the following modifications: Proposed Modification (1): Increase fastener size from 1 -8 to 1-1/4 -7 Proposed Modification (2): Increase QTY of fasteners from (8) per fender to (12) per fender Proposed Modification (3): Add Hot Dipped Galvanized Lock Washer Line Item 2 Hot dipped galvanized hardware for (2) Trapezoidal Fenders per BOM on Drawing 5421000 with the following modifications Include Hot dipped galvanized lock washer Line Item 3 UHMW Pier Skid Plate o UHMW Pier Skid Plate per drawing 5401008 Rev B (see attached) Proposed Modification (1): Add QTY (4) additional bolt holes and access holes Proposed Modification (2): Increase bolt hole size to Dia 1-1/16 to accommodate 1 bolts o Necessary mounting hardware for UHMW Pier Skid Plate per BOM on Drawing 5421000 with the following modification: Proposed Modification (1): Increase fastener size from 3/4 -10 to 1 -8 Proposed Modification (2): Increase QTY of fasteners from (8) per UHMW section to (12) per UHMW section Proposed Modification (3): Add Hot Dipped Galvanized Lock Washer Line Item 4 Zinc Anodes o Zinc Anode p/n ZHC-23 per MIL-A-18001K 12 X6 X1-1/4 o 18-8 SS Nylon Lock Nut -13 o 18-8 SS Flat Washer NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (24-APR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/DON/NAVSUP/N00189/N0018919Q0218/listing.html)
- Record
- SN05291785-F 20190426/190424230044 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |