MODIFICATION
42 -- FIRE HOSE
- Notice Date
- 3/27/2019
- Notice Type
- Modification
- Contracting Office
- 5212 Doolittle Road, Dugway, UT 84022
- ZIP Code
- 22030
- Solicitation Number
- DUGWAYFIREDWA0017
- Response Due
- 3/28/2019
- Archive Date
- 9/24/2019
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is DUGWAYFIREDWA0017 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101. The associated North American Industrial Classification System (NAICS) code for this procurement is 339999 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-03-28 15:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Dugway, UT 84022 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: HOSE, 1.75" X 50' (NH) RED- Double jacket hose manufactured to this specification shall be tightly woven with filament polyester yarn in the filler and ring spun polyester yarn in the warp of both the inside and outside jackets. The hose shall be resistant to most chemicals and petrol products, and resist deterioration due to exposure to UV rays and ozone. It shall not be affected by rot or mildew. The inside and outside jackets shall be manufactured with a minimum pick count of 9.5 picks per inch for increased strength and abrasion resistance. The inside jacket shall be manufactured using a reverse twill process to reduce friction loss. The inside jacket shall be manufactured on a circular loom in a clockwise direction and the outside jacket in a counter-clockwise direction. The hose must be of sufficient body and weight to meet the demands of heavy-duty fire fighting usage.The minimum burst test pressure, when tested in accordance to NFPA 1961, on all Big-10 diameters up to 3" shall be 1200 psi / 82 bar.Minimum burst test requirements for 3.5" diameter shall be 900 psi /62 bar. Service test pressures stenciled on the hose shall be in NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (27-MAR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/ad9a9ac102baa9a3f2944ec58992bd75)
- Place of Performance
- Address: Dugway , UT 84022
- Zip Code: 84022
- Country: US
- Zip Code: 84022
- Record
- SN05262607-F 20190329/190327230051 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |