SOLICITATION NOTICE
66 -- Electrosurgical Analyzer
- Notice Date
- 3/25/2019
- Notice Type
- Combine Synopsis/Solicitation
- Contracting Office
- 6600 Van Aalst Blvd, Fort Benning, GA 31095
- ZIP Code
- 22030
- Solicitation Number
- 19-18017
- Response Due
- 3/28/2019
- Archive Date
- 9/24/2019
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 19-18017 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101. The associated North American Industrial Classification System (NAICS) code for this procurement is 334515 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-03-28 12:30:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Fort Benning, GA 31095 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: FLUKE QAES-III or EQUIVALENT Complete electrosurgical testing and preventive maintenance for ESU devices. Electrosurgery Analyzer Physical Housing: Metal case Size HxWxL): 14.5 cm x 35 cm x 47 cm (5.75 in x 13.75 in x 18.5 in) Weight:7.5 kg (16.5 lbs) Power Power Requirements: 100 V ac, 115 V ac, 230 V ac, 50 Hz / 60 Hz, universal input 100 V/115 V: 20 VA 230 V: 30 VA User interface LCD: Monochrome 240 pixels x 64 pixels, 8 lines x 40 characters, white LED backlight Keys Key Features Test all critical ESU functions with precise power, current, frequency, crest factor and load resistance ranges Collect measurements in single and continuous mode Connect wirelessly via Bluetooth for easy record retrieval without interference or limitation by cables and wires* Comply to all global standards, including ANSI/ AAMI and IEC** All-in-one tool: all hardware and software necessary to complete preventive maintenance and troubleshooting is built in to the unit, eliminating the need to purchase or transport additional cables, leads, switch boxes and RECM box *Wireless capabilities ** Bipolar leakage testing performed with 200 ohm fixed load. Continuous operation: Continuous measurement of power, current, peak-to-peak voltage (closed load only), and crest factor Single operation: Single measurement after the set delay time of the ESU output of power, current, peak-to-peak voltage (closed load only), and crest factor Power distribution: Tests impedance-sensing circuitry in power guarantee functions in new-generation ESU. Applicable parameters “ power, current, peak-to-peak voltage (closed load only) and crest factor “ can easily be observed during the measurements RF leakage current: Provides connections and load configurations to measure HF leakage from both grounded and isolated equipment RECQM: Test the return electrode control quality monitoring using the QA-ES internal loads Ability to test all modern high power electrosurgical units with generator output current accuracy as low as ± 2.5 %. Collect all measurements including vessel sealing, contact quality monitor (CQM), high frequency (HF) leakage and output power distribution in single or continuous mode. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (25-MAR-2019); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/a961b16a2de6068e08e7476fab5be18c)
- Place of Performance
- Address: Fort Benning, GA 31095
- Zip Code: 31095
- Country: US
- Zip Code: 31095
- Record
- SN05259596-F 20190327/190325230029 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |