Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 08, 2018 FBO #6133
DOCUMENT

65 -- 36C25818Q9765 Dental Restoration System - Attachment

Notice Date
9/6/2018
 
Notice Type
Attachment
 
NAICS
339114 — Dental Equipment and Supplies Manufacturing
 
Contracting Office
Department of Veterans Affairs;NCO 22 - Gilbert;777 E. Missouri, Suite 300;Phoenix AZ 85014
 
ZIP Code
85014
 
Solicitation Number
36C25818Q9765
 
Response Due
9/10/2018
 
Archive Date
11/9/2018
 
Point of Contact
Abdalia "Dale" Smith
 
Small Business Set-Aside
N/A
 
Description
This is NOT a solicitation announcement. This sources sought notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of the Department of Veterans Affairs (VA). The purpose of this sources sought is to gain knowledge of potential qualified sources and their size classification relative to NAICS 339114 Dental Equipment and Supplies Manufacturing (size standard of 750 employees). Responses to this sources sought will be used by the Government to make appropriate acquisition decisions. After review of the responses, a solicitation announcement may be published. Responses to this sources sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Network Contracting Office Gilbert, is seeking sources that can provide an Dental Restoration System composed of the items that will follow below for the Phoenix VA Healthcare System located at 650 E. Indian School Road, Phoenix Arizona 85012. The Contractor shall be responsible for delivery, installation, and training to meet functional equipment requirements; brand name or equal; New Equipment ONLY; NO remanufactured or "gray market" items. Brand Names used below are from Degree of Freedom USA, 3D BioCAD, and SprintRay Inc. Statement of Work The components of this system work together to produce an on-station, milled ceramic dental restoration, implant prosthesis or 3D surgical template for direct patient care. There are two scanners, intra-oral and milling machines that will allow us to scan a patient directly, or scan several laboratory components during the restoration process, that are sent to the milling machine for fabrication.   The 3D printer also can assimilate data from the scanners, or directly from our CBCT imaging system, for fabrication of implant surgical guides, temporary restorations, and many other clinical applications. Parent Item 1 MoonRay 3D Printer Minimum Feature Size 75-100 Microns, Print Every Detail -Fast Printing 1 in/hour Consistent Print Speed, Minimum Layer Thickness 20 Microns, Print Tall Parts 5 x 3.2 x 8 Build Size Parent Item 2 Degree of Freedom UHD (3D Scanner) and SHARP2 PLS Milling Machine Parent Item 3 3D BioCAD 3SHAPE TRIOS 3 Color Wireless Pen MOVE (handheld 3D scanner) and TruMill X550 Machine Holidays Normal business hours are 8 a.m. to 4:30 p.m., Monday through Friday excluding the following federal holidays: New Year's Day, Martin Luther King Day, President's Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, Christmas, and any other day specifically declared by the President of the United States to be a national holiday. SCHEDULE ITEM INFORMATION ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 1.00 EA DOF Freedom UHD Scanner High Definition 3D Dental Scanner - Stable Scan Stage Technology for easier scanning workflow - 5.0 Megapixel Camera 0002 2.00 EA EXOCAD DESIGN DONGLE Includes Labor for Installation of all computers. - Comes with all Exocad modules 0003 1.00 EA Exocad Demo Dongle Demo version of the software Exocad full set of available modules. 0004 1.00 EA SHARP2 PLUS MILLING MACHINE Package (Wet/Dry) Sharp2 Plus Mill total price reflects $3000.00 discount 0005 1.00 EA HYPERDENT COMPACT 0006 1.00 EA DOF Freedom UHD Computer Motherboard ASROCK Z270M PRO4 Processor Intelr Quad CoreT i7- 7700K Processor Memory Xidax Extreme DDR4 2400MHz Memory - 32GB Power Supply Xidax Performance Power Supply 500W 0007 1.00 EA KDF Zircom Sintering Furnace - AC 220V 50/60Hz - 12" (w) x 25" (h) x 18" (d) - 3.5inch LCD Color Display - 1,600?C (2,912?F) indicates 0008 2.00 EA Exocad Implant Module - Custom abutment design - Screw-retained bridges 0009 2.00 EA Exocad Bar Module 0010 2.00 EA Exocad Virtual Articulator Module 0011 2.00 EA Exocad Bite Splint Module 0012 2.00 EA Exocad ZRS Module 0013 2.00 EA Exocad Denture Module 0014 2.00 EA Exocad TruSmile 0015 2.00 EA Exocad Provisional Module 0016 2.00 EA Exocad Model Creator 0017 1.00 EA Installation and Training 0018 1.00 EA MIlling Tools and Zirconia Credit 0019 1.00 EA DOF Freedom HD/Swing Laptop will come with 1080 GTX card and 32gigs of RAM 0020 2.00 EA Exocad Software Upgrade 2-year add on extension for Exocad, ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT 0001 2.00 EA 3Shape TRIOS 3 Color Wireless Pen MOVE 3D Scanner MOVE Configuration 5 Autoclavable Scan Tips + 1 Protective Tip 3 Batteries and Charging Hub 0002 2.00 EA TRIOS Annual License YEAR 1-3 Total 3 Years Unlimited Restorative Scans Unlimited Software Updates 0003 2.00 BX TRIOS 3 Scanner Tip Box of 3 tips 0004 2.00 EA Extended Warranty + 2 Year AND Express Replacement Service TRIOS Wand Only 0005 1.00 EA 3Shape E-3 Dental System Complete LabCare - 1st Seat Abutment Module Bar & Brdige Module Denture Module Partial Module Model Builder STL Module 0006 1.00 EA E-3 Dental System Complete Annual License YEAR 1-3 - 1st Seat Total 3 Years Unlimited Restorative Scans Unlimited Software Updates 0007 1.00 EA Dental System Complete Restorative Additional - 2nd Seat Abutment Module Bar & Bridge Module Denture Module Partial Module Impression Module Includes First Year Annual License 0008 1.00 EA E-3 Dental System Complete Annual License YEAR 1-3 2nd Seat (25%)Total 3 Years Unlimited Restorative Scans Unlimited Software Updates 0009 1.00 EA Extended Warranty + 4 Year AND Express Replacement Service 0010 1.00 EA Impression Scanning fixture Scanning of impression 0011 1.00 EA Monitor PC Comes with E-3 Scanner 0012 1.00 EA MACHINE:3D BioCAD TruMill X550 Milling Machine 0013 1.00 EA CAM SOFTWARE: Follow Me Hyperdent German CAM Software built for dental milling machines. 0014 1.00 EA PC / MONITOR Hyperdent 0015 10.00 EA TOOL: Zir Ball End Mill Tool ZB_05_D2.0 Diameter: 2mm Shank: 6mm Total Length: 50mm 0016 5.00 EA TOOL: Zir Ball End Mill Tool ZB_07_D0.6 Diameter: 2mm Shank: 6mm Total Length: 50mm 0017 5.00 EA TOOL: Metal Ball End Mill Tool MB_09_D3.0*L12*50 High hardened coated Diameter: 3mm Shank: 6mm Millable Length: 12mm Total Length: 50mm 0018 5.00 EA TOOL: Metal Ball End Mill Tool Tool MB_10_D2.0*L12*50 High hardened coated Diameter: 2mm Shank: 6mm Millable Length: 12mm Total Length: 50mm 0019 5.00 EA TOOL: Metal Ball End Mill Tool MB_11_D1.5*L10*50 High hardened coated Diameter: 1.5mm Shank: 6mm Millable Length: 12mm Total Length: 50mm 0020 5.00 EA TOOL: Metal Ball End Mill Tool MB_12_D1.0*L10*50 High hardened coated Diameter: 1.mm Shank: 6mm Millable Length: 12mm Total Length: 50mm 0021 5.00 EA TOOL: Metal Ball End Mill Tool MB_13_D1.5*L06*50 High hardened coated Diameter: 1.5mm Shank: 6mm Millable Length: 6mm Total Length: 50mm 0022 5.00 EA TOOL: Flat End Mill Tool MB_15_D2.0*L18*55 High hardened coated Diameter: 2mm Shank: 6mm Millable Length: 18mm Total Length: 55mm 0023 5.00 EA TOOL: Flat End Mill Tool MB_16_D2.0*L06*50 High hardened coated Diameter: 2mm Shank: 6mm Millable Length: 6mm Total Length: 50mm 0024 5.00 EA TOOL: Flat End Mill Tool MB_17_D1.7*L14*50 High hardened coated Diameter: 1.7mm Shank: 6mm Millable Length: 14mm Total Length: 50mm 0025 3.00 EA TOOL: Drill Tool MD_18_D1.5*L14*50 Diameter: 1.5mm Shank: 6mm Millable Length: 14mm Total Length: 50mm 0026 3.00 EA TOOL: Drill Tool MD_19_D2.3*L18*55 Diameter: 2.3mm Shank: 6mm Millable Length: 18mm Total Length: 50mm 0027 3.00 EA TOOL: Reamer Tool MR-02-D2.6*L18*55*180 DEGREE For NobelBiocare Multi-unit 4.8 size Diameter: 2.6mm Shank: 6mm Millable Length: 18mm Total Length: 55mm Angle: 180 degrees 0028 3.00 EA TOOL: Reamer Tool MR-09-MR-09-D2.4*L18*55*70 DEGREE For NobelBiocare Brenamark_NP For NobelBiocare Active 3.5 Diameter: 2.4mm Shank: 6mm Millable Length: 18mm Total Length: 55mm Angle: 70 degrees 0029 3.00 EA TOOL: Reamer Tool MR-13-MR-13-D2.7*L18*55*70 DEGREE For NobelBiocare Active 4.3/5.0 Diameter: 2.7mm Shank: 6mm Millable Length: 18mm Total Length: 55mm Angle: 70 degrees 0030 5.00 EA TOOL: Glass Ceramic Tool Diameter: 2.5mm Shank: 6mm 0031 5.00 EA TOOL: Glass Ceramic Tool Diameter: 1.5mm Shank: 6mm 0032 5.00 EA TOOL: Glass Ceramic Tool Diameter: 1.0mm Shank: 6mm 0033 8.00 EA SCANBODY: NOBELBIOCARE MULTI UNIT4.8 0034 2.00 EA SCANBODY: NOBELBIOCARE ACTIVE NP3.5 LOCAL STOCK 0035 2.00 EA SCANBODY: NOBELBIOCARE Active RP4.3/5.0 0036 2.00 EA SCANBODY: NOBELBIOCARE Active WP 0037 2.00 EA SCANBODY: NOBELBIOCARE Branemark NP3.5 0038 2.00 EA SCANBODY: NOBELBIOCARE Branemark RP4.0 0039 2.00 EA SCANBODY: NOBELBIOCARE Branemark WP5.0 0040 2.00 EA SCANBODY: NOBELBIOCARE Replace Select NP3.5 0041 2.00 EA SCANBODY: NOBELBIOCARE Replace Select RP4.3 0042 2.00 EA SCANBODY: NOBELBIOCARE Replace Select WP5.0 0043 2.00 EA SCANBODY: NOBELBIOCARE Replace Select SW6.0 0044 5.00 EA GLASS CERAMIC HOLDER 0045 2.00 EA TITANIUM DISC Gr5 10MM 0046 2.00 EA TITANIUM DISC Gr5 12MM 0047 2.00 EA TITANIUM DISC Gr5 13.5MM 0048 2.00 EA TITANIUM DISC Gr5 15MM 0049 2.00 EA TITANIUM DISC Gr5 16MM 0050 2.00 EA TITANIUM DISC Gr5 18MM 0051 12.00 EA PMMA Multilayered 16MM A1 0052 12.00 EA PMMA Multilayered 16MM A2 0053 12.00 EA PMMA Multilayered 16MM A3 0054 12.00 EA PMMA Multilayered 16MM BL 0055 12.00 EA PMMA Multilayered 16MM 0056 12.00 EA PMMA Multilayered 16MM B2 0057 3.00 EA PMMA Multilayered 20MM A1 0058 3.00 EA PMMA Multilayered 20MM A2 0059 3.00 EA PMMA Multilayered 20MM A3 0060 3.00 EA PMMA Multilayered 20MM BL 0061 3.00 EA PMMA Multilayered 20MM B1 0062 3.00 EA PMMA Multilayered 20MM B2 0063 25.00 EA PINK DISC 25MM Medium 0064 25.00 EA PINK DISC 30MM Medium 0065 8.00 EA Multilayerd Preshaded Zirconia 12MM A1 0066 5.00 EA Multilayerd Preshaded Zirconia 12MM A3 0067 5.00 EA Multilayerd Preshaded Zirconia 12MM B1 0068 5.00 EA Multilayerd Preshaded Zirconia 12MM B3 0069 5.00 EA Multilayerd Preshaded Zirconia 14MM A1 0070 5.00 EA Multilayerd Preshaded Zirconia 14MM A3 0071 5.00 EA Multilayerd Preshaded Zirconia 14MM B1 0072 5.00 EA Multilayerd Preshaded Zirconia 14MM B3 0073 5.00 EA High Translucent Zirconia DISC 12MM 0074 5.00 EA High Translucent Zirconia DISC 14MM 0075 3.00 EA High Translucent Zirconia DISC 20MM 0076 3.00 EA High Translucent Zirconia DISC 25MM 0077 1.00 EA Zirconia Pre-sintered Stain ZirkonZahn Color Set Waterbased (A1-D4) 0078 1.00 EA Zirconia Pre-sintered Stain Blue insicor liquid 0079 1.00 EA Zirconia Pre-sintered Stain Pink liquid 0080 1.00 EA SPINDLE COLLET TRUmill X550 0081 1.00 KT Calibration Kit Micrometer: Mitutoyo Digimatic 1ea Calibration Cartridge: 1ea Calibration Block: 2 ea 0082 2.00 YR MAINTENANCE EXTRA 2 YEARS 0083 1.00 JB INSTALLATION & TRAVEL & TRAINING 0084 2.00 SE OPERATOR'S, SERVICE AND REPAIR PARTS MANUALS, ONE HARD COPY ONE ELECTRONIC (IF AVAILABLE) 0085 10.00 EA TOOL: Zir Ball End Mill Tool ZB_06_D1.0 Diameter: 1mm Shank: 6mm Total Length: 50mm ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 1.00 EA MoonRay S Wireless 3D Printer 0002 1.00 EA Gold Service Plan 0003 4.00 EA Gray Resin 0004 1.00 EA NextDent Crown & Bridge 0005 3.00 EA Resin Tank Assembly 0006 5.00 EA Surgical Guide Resin 0007 5.00 EA NextDent Ortho Clear 0008 2.00 EA OPERATOR'S, SERVICE AND REPAIR PARTS MANUALS, ONE HARD COPY ONE ELECTRONIC (IF AVAILABLE) The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested, and are capable of providing the sought-out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc. (2) Is your company considered small under the NAICS code identified under this source sought announcement? (3) Are you the manufacturer or distributor of the items being referenced above? What is the manufacturing country of origin of these items? (4) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (5) Does your company have a Federal Supply Schedule (FSS) contract with General Services Administration (GSA) or the National Acquisition Center (NAC) or are you a contract holder with NASA SEWP (National Aeronautics and Space Administration / Solutions for Enterprise-Wide Procurement) or any other federal contract? If so, please provide the contract type and number. (6) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions available on your schedule/contract? (7) Please provide general pricing for your products/solutions for market research purposes. (8) Please submit your capabilities in regards to the salient characteristics being provided for planning purposes. *** Submissions addressing Section (8) should show clear, compelling and convincing*** evidence that all equal to items" meet all required salient characteristics. Responses to this notice shall be submitted via email to abdalia.smith@va.gov. Telephone responses will not be accepted. Responses must be received no later than Sunday, September 9th, 2018 at 4 PM PST. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PhVAMC/HMC/36C25818Q9765/listing.html)
 
Document(s)
Attachment
 
File Name: 36C25818Q9765 36C25818Q9765.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4578279&FileName=36C25818Q9765-000.docx)
Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4578279&FileName=36C25818Q9765-000.docx

 
Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 
Record
SN05078025-W 20180908/180906233216-5f15f41f435cbe42fffae3f526d340b7 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.