FBODaily.com | FedBizOpps: PRESOL | 44 | Boiler / BURNER SPARE PARTS

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 08, 2018 FBO #6133
SOLICITATION NOTICE

44 -- Boiler / BURNER SPARE PARTS

Notice Date: 9/6/2018
Notice Type: Combined Synopsis/Solicitation
Contracting Office: 8100 Islamabad Place, Washington, DC 20521
ZIP Code: 20521
Solicitation Number: PR7607320
Response Due: 9/20/2018
Archive Date: 3/19/2019
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR7607320 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-100. The associated North American Industrial Classification System (NAICS) code for this procurement is 332410 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-09-20 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be North Brunswick, NJ 08902 The U.S. Embassy Islamabad, Pakistan requires the following items, Brand Name or Equal, to the following: LI 001: ARM ASSEMBLY, LINKAGE FOR 3/8" SHAFT X 3" SLOT Part #: 002-00183 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 002: ARM ASSEMBLY, LINKAGE FOR 3/4" SHAFT X 3" SLOT, Part # 002-00184 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number. -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 003: ARM ASSEMBLY, LINKAGE FOR 1/2" SHAFT X 3" SLOT, Part # 002-00374 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 004: SPUD, GAS;.220"ID X 5/16-24; "H" SZ-1-2-3 (BTN HD, B.U.G.), Part # 042-00123 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 005: PLATE; FGR INLET OPENING COVER AIR BOX; NTH/V SIZE-2; GAS APP, Part # 059-01545 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 006: PLATE, MOTOR MOUNTING - V-SERIES SIZE-3 - FOR 4.5" MOTOR MTNG BOSS & 5.88" MOTOR BOLT CIRCLE, Part # 059-02334 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 007: PLATE, CONE, INLET HOUSING, FAN, ASSEMBLY V-SERIES, SIZE-3, Part # 059-02592 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 008: MPELLER, AIR; 9.875" OD X 2.5" WIDE X.875" BORE; MODEL R987-250S REVCOR PART #109686, Part # 192-00419 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 009: DIFFUSER-WLDMT, OIL ONLY, DRWR-ASSY, V-SER, SZ-3, Part # 275-01034-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 1, EA; LI 010: GAS PILOT ASSEMBLY, (1.0" DIAMETER, STAINLESS STEEL) V-SERIES, Part # 284-02030-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 011: CAM ASS'Y, RIGHT HAND; "M & D" CAM TRIM SYSTEMS, Part # 313-00015 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 012: DAMPER-ASSEMBLY, AIR, AIR HANDLING ASSEMBLY, V-SERIES, SIZE-3 (CB PAINT), Part # 427-03657-001 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 013: LINKAGE ASS'Y, CAM FOLLOWER; 1/4" LINKAGE W/HEAVY SPRING, Part # 476-00082 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 014: BEARING, FLANGED 2 BOLT PILLOW BLOCK (BORE HONED TO.760"), Part # 807-00335 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 015: DETECTOR, FLAME; UV; STRT HD; 8' LEADS 0-215 DEG F AMBIENT TEMP, CLAMP WIRING CONNECTOR; C7027A1023/U, NOTE: FOR CB AFTERMARKET PARTS ORDERS USE P/N 817-02354-000 (ADC STOCKED PART), Part # 817-00613 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 016: SWITCH, HI-LO OIL PRESS 40-400 PSI SPDT (ASCO, PB10A/RJ10A11) SWITCH, HIGH-LOW OIL PRESSURE SPDT CONTACTS; 40-400 PSI RANGE; U.L. & CSA APPROVED; FM APPROVED AS AIR SWITCH ONLY PRODUCT NO. 03226; ASCO #PB10A/RJ10A11, Part # 817-00827 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 017: REGULATOR, GAS 1/2" NPT 6.5-9" WC SPRING (FISHER, R622)125PSIG MAX ALLOWABLE INLET OPERATING PRESSURE, Part # 817-00828 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 018: SWITCH, LO GAS PRESS SPDT W/ M.R. 1-35" WC MODEL-A SERIES, LGP-A, ANTUNES #803112509 APPROVALS: UL, CSA, FM 10 PSI MAX SURGE PRESSURE MANUAL RESET, Part # 817-00847 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 019: TRANSFORMER, IGNITION 115/1/50 6,000 V. (DONGAN# EO6-SJ5) - SECONDARY SNAP-ON TERMNAL WITH PORCELAIN RING END POINT GROUND UL APPROVED ON INTERCHANGEABLE BASIS - WEBSTER #612-8B038V DONGAN# EO6-SJ5, Part # 832-00685 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 020: ELECTRICAL CONTROL, MOTOR OVERLOAD - 1.0-1.6 FLA - TELEMECANIQUE #LRD06, Part # 833-01459 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 021: ELECTRICAL CONTROL, MOTOR OVERLOAD - 4.0-6.0 FLA - TELEMECANIQUE #LRD10, Part # 833-01462 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 022: SWITCH, AIR PRESS; 0.17-12.0" WC; 120V; SPDT SWITCH W/ SCREW TERMS; 1/8" NPT NEGATIVE INLET; 1/4" NPT POSITIVE INLET; RATED FOR -40 DEGREES F TO 170 DEGREES F; UL LISTED & CSA APPROVED; ANTUNES, #8021206255 * NEW 8021206255 IS NO LONGER FM APPROVED * ** WAS PART #8024200202 ** USE 836-00422 FOR FM APPLICATIONS. POSITIVE PORT COLLAR ~1" OD WITH ID THREADED FOR 1/4" NPT., Part # 836-00430 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 023: CONNECTOR, IGNITION CABLE 90 DEG (RAJAH, S-SOS #11) TERMINAL, SPRING SNAP, SOLDER- LESS 2/90 DEG. ANGLE EXTENDED BAKELITE, FERRULE; RAJAH #S-S0S #11 ANGLE EXT. AEBF; CROWN ENGR. SIT-212A CROWN #55211-10 (10/PK), Part # 848-00156 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 024: CONNECTOR, IGNITION CABLE SPRING LOCK, 50-PCS PER PACKAGE, CROWN #55201, Part # 848-00493 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 025: RELIEF, CABLE STRAIN 1/4" X.135-.200" CABLE; HUBBELL HJ1011G PK25 PACKAGE OF 25PCS, Part # 848-00507 - -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 026: GAUGE, PRESSURE - RANGE 0-15"WC - 2-1/2" DIAL - 1/4 NPT BOTTOM CONNECTION, Part # 850-00348 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 027: GAUGE, PRESSURE - RANGE 0-200 PSI - GLYCERIN FILLED - 1/4" NPT BRASS BOTTOM CONNECTION - STAINLESS STEEL CASE, Part # 850-00352 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 028: GAUGE, PRESSURE - RANGE 0-600 PSI - GLYCERIN FILLED - 1/4" NPT BRASS BOTTOM CONNECTION - STAINLESS STEEL CASE - TRERICE #D82LFB2502LA100 ALT; WEISS MODEL #LF254S-1, Part # 850-00353 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 029: GLASS, SIGHT, 1/2" MCMASTER P/N 1210K23 1/2" NPTF MALE, (DRYSEAL) LOW PRESSURE W/O REFLECTOR, 100 PSI BRASS LIQUID-LEVEL SIGHT,, Part # 851-00188 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 030: BALL JOINT, 1/4-20 MALE THREAD X 9/16" LG, SLIDE JOINT, TUTHILL CLAMP TYPE, "D.C.", WITH CROSS HOLE DIA. TO FIT BOTH 1/4" & 5/16" DIA. ROD, WITH NUT & WASHER, TUTHILL LINKAGE GROUP #DC1209CN, VALLEY TOOL #0809 ***TO COME ASSEMBLED***, Part # 883-00031 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 6, EA; LI 031: BALL JOINT, 5/16-24 X 90 DEG DISC (MILLED TO FIT 1/4" SLOT), Part # 883-00035 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 032: ACTUATOR, MODULATION - 120 VOLT - 140 IN-LBS - 25 SEC NOMINAL TIMING - 2 LIMIT & 4 AUXILLARY SWITCHES - SQUARE 3/8" DUAL ENDED SHAFTS (074-00637)(INCLUDED) - UL RECOG CSA CERT - AGA56.42A INTERNAL CIRCUIT BOARD, (0-135 OHM INPUT) - ASZ12.30 POTENTIOMETER (1000 OHM, 90 DEG) - SIEMENS #SQM50.464R1H3 - (MAY REQUIRE) 8-2096 SIEMENS MOD MOTOR BRACKET, Part # 894-01468 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 033: MOTOR, ELECTRIC - 3HP - 380/3/50/2900 SRPM - NEMA 182CZ FRAME - OPEN DRIP PROOF - C-FACE MOUNTING - 7/8" SHAFT AS PER DRAWING 74-514 - SEVERE DUTY STATOR WITH BRACED WINDINGS - PRECISION BALANCED ROTOR - CLASS F3 INSULATION - "EPACT" EFFICIENT - SERIES-E - LABELED FOR CLEAVER BROOKS - ("C" FACE) TO BE THE SAME AS OUR 894-1302 - PER DWG. 074-514-L - M.E. #182TTDR14005REWOUND MOTOR FROM 894-04029-000 FOR 380/3/50, Part # 894-04029-RW -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 034: OIL NOZZLE, RETURN FLOW - 26.0 GPH @ 100PSI - 80 DEGREE SPRAY - DELAVAN "VARIFLO" - W/STRAINER - DELAVAN #33769-115, Part # 899-00183 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 035: VALVE, GAS BUTTERFLY 2.5" RED PORT IND COMB, UL APPROVED REFER TO DWG: 940-01193 REV F AN UPDATED DRAWING IS AVAILABLE UPON REQUEST, Part # 940-01193 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 6, EA; LI 036: VALVE, OIL METERING; 3/8" MUST BE LABELED U.L. APPROVED, HAUCK MFG. #S-3-9D (#HK42574), Part # 940-01351 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 037: VALVE, 2-WAY OIL SOLND, 3/8" NPT, N.C. 120V, N.C., NEMA -4 RATED, 120V, AMBIENT TEMP 32-150 DEG F; FLUID TEMP 32-250 DEG F, CONTINUOUS DUTY COIL, MUST BE UL & CSA LISTED AND FM APPROVED, ASCO #SV401A02V9CF7, ALTERNATE: G.C. VALVES #S401AF02V9CF5E, (PER ECN 2183), Part # 940-01520 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 038: VALVE, OIL SOL 1/4" - NC, 2-WAY, ASCO L8262H021V 120/60, 110/50, 72" CONTINOUS LEADSNEMA 3-9, CLASS "F" COIL, 1/4" NPT PIPE CONNECTION - 3/32" ORIFICE SIZE, #2 OIL @ 350 PSI, CV FLOW FACTOR 0.21, UL, FM, CSA APPROVED NEMA 4X, Part # 940-05826-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 039: VALVE, GAS SOLENOID - 1/2" NPT - 2-WAY N.C. - 120/60 110/50 VOLT - 50 PSI MAX OPERATING PRESSURE - ASCO #L8215G020-120/60,110/50 - APROVALS: UL, CSA, FM72" LEADS, NEMA 1-4X, Part # 940-07548-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 040: VALVE, BALL TYPE - 1/2" NPT - BRASS BODY - SCREWED W/HANDLE - (NIBCO - T-FP600A) - ALT: (MILWAUKEE VALVE #BB2-100), Part # 941-00585 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 041: BASE, RELAY MOUNTING 8-PIN ROUND, DIN RAIL (SQR D 8501 NR-51;"NR-51B" 10 unit bulk package ) FOR USE WITH 8501KP12, 8501KPD12; 8430MPS(240V); 9050 JCK 11-19,31-39,51-59,60, 1F, 3F, 5F RELAYS., Part # 832-00947 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 042: MODULE, UV SIGNAL AMP HW R7849A1023/B, Part # 832-01069 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 043: MODULE, TIMER 30 SECOND PURGE (M.H., ST7800A1039/U), Part # 832-01070 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 044: FUSE, TIME DELAY, 3.5 AMP CLASS "CC" (FERRAZ ATDR-3 1/2) FERRAZ SHAWMUT, Part # 832-01156 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 045: FUSE, TIME DELAY, 10 AMP CLASS "CC" (FERRAZ, ATDR-10) FUSE, TIME DELAY, 10 AMP CLASS "CC" (FERRAZ, ATDR-10) ALT: LITTLEFUSE CCMR-10, Part # 832-0116 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 046: BLOCK, ELEC DISTRB 1-POLE 195A 4-FEEDER UW/832-01198 ADD-ON BLOCK, ELECTRICAL DISTRIBUTION 1 POLE, 195 AMP, 4 FEEDER FERRAZ SHAWMUT #63131 USE COVER 832-1242. 100 KA SCCR, Part # 832-01181 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 047: BLOCK, FUSE; CLASS "CC", 600V 1-30A 3 POLE, W/OPEN FUSE INDICATOR, FERRAZ USCC3I (SCCR 200KA), ALTERNATIVE: BUSSMAN CHCC3DI, Part # 832-01188 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 048: BLOCK, ELEC DISTRIB ADD-ON 1- POLE 195A 4-FEEDR UW/832-01181 BLOCK, ELEC DISTRIBUTION ADDER 1 POLE, 195 AMP, 4 FEEDER, FERRAZ SHAWMUT #63130, USE COVER 832-01242. 100 KA SCCR, Part # 832-01198 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 049: FUSE, CLASS "CC", 2-1/2 AMP, (FERRAZ SHAWMUT, ATQR2-1/2) FUSE, CLASS "CC", 2-1/2 AMP, (FERRAZ SHAWMUT, ATQR2-1/2), Part # 832-01204 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 050: FUSE, CLASS "CC", 6 AMP, (FERRAZ SHAWMUT, ATQR6) FUSE, CLASS "CC", 6 AMP, (FERRAZ SHAWMUT, ATQR6), Part # 832-01210 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 051: TRANSFORMER, CONTROL CIRCUIT - 1/2 KVA - 380/400/415V PRIMARY - 115V SECONDARY - WITH TOP MOUNTED CLASS CC FUSE HOLDERS - SQUARE-D - #9070TF500D33, Part # 832-01220 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 052: BASE, CONTROLLER (M.H., Q7800A1005/B), Part # 833-01278 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 053: RELAY,.3-30MIN DELAY ON MAKE D.P.D.T. (SQ-D 9050 JCK-17V20), USE WITH 832-00947 NR51 BASE, Part # 833-01401 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 054: RELAY,.1-10SEC DELAY ON MAKE 8 PIN D.P.D.T. (SQR-D, 9050 JCK-11) 120 VAC OPERATING VOLTAGE VARIABLE TIME DELAY ON DELAY D.P.D.T. TYPE JCK-11-V20. USE WITH NR-51 8 PIN BASE PN 832-00947, Part # 833-01404 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 055: ELECTRICAL CONTROL, MOTOR CONTACTOR - 12 FLA MAX - TELEMECANIQUE #LC1D12G7, Part # 833-01450 - -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 056: CONTROLLER, PROGRAM; 50/60CYC; INCLUDES DISPLAY (M.H., RM7800L1087/U) WITH VALVE PROVING FEATURE DISPLAY PART #833-01654 (M.H., S7800A1142), Part # 833-01562 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 057: MODULE, MODBUS, HONEYWELL #S7810M1003/U; (U.S. APPL) MODULE, DATA CONTROLBUS, FOR USE RM7800 CONTROL, PROVIDES MODBUS COMMUNICATIONS, **** USE FOR U.S. APPLICATIONS ONLY. FOR EUROPEAN APPL USE 833-01545. *** UL RECOGN., Part # 833-01614 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 058: ALARM, SOUND, PIEZO; 95 DB, 120VAC, (INGRAM # PW120AR), Part # 833-01649 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 059: CARTRIDGE, CONV. CONTACT UW/ SQUARE-D CLASS 8501 TYPE XC-1, Part # 833-02227-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 060: DECK, CONV. CONTACT ADDER UW/833-2229 TO INCLUDE 2 CONVERTABLE CONTACTS; W/SPACE FOR 2 ADDITIONAL; SQUARE-D CLASS 8501 TYPE XB-20, Part # 833-02228-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 061: RELAY, 2 POLE W/600 VOLT 10 AMP CONVERTABLE CONTACTS; 50-60 HZ 115 VOLT COIL; SQ-D, CLASS 8501, TYPE XO20, Part # 833-02229-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 062: RELAY PLUG IN DPDT 115VAC COIL, AB 700-HK32A1USE WITH 8 PIN WIRING BASE 833-03534-000, Part # 833-03532-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 063: WIRING BASE, RELAY - 8-PIN - DIN RAIL MOUNTING, Part # 833-03534-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 064: RELAY 4PDT 10A 120VAC 50/60HZ WITH BLADE TERMINALS; 700-HC24A1USED WITH 833-03196-000 BASE, Part # 833-03535-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 065: RELAY, LIQUID LEVEL, WARRICK 26C1B0Z 115V/50/60 PRI, 12V. SEC, 26K SENSITIVITY, N.O. AND N.C. CONTACTS, MANUAL RESET FUNCTION, TEST FUNCTION, POWER OUTAGE FEATURE, Part # 833-04093-000 - -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 066: POTENTIOMETER, MODULATION 135 OHM WITH BLACK PLASTIC KNOB; HONEYWELL MODEL #30112A, Part # 836-00209 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 067: SWITCH, ROTARY CAM 8 CONTACT 3 POSITION (SQ-D, CLASS #9003) REFER TO DWG: 836-00421 REV NA - NOTE: UPDATED DRAWINGS - - AVAILABLE UPON REQUEST. - K2XH003US CONTACTS: 8 TYPE K2XH CNTCTS SWITCH ANGLE: 90 DEG 3 POS. HANDLE: TYPE KAE1B W/SEPARATE OIL-OFF-GAS LEGEND PLATE OPERATION: AS PER SWITCH KEY SHEET NOTED ABOVE 22mm IP65MADE UP OF (1) 9003 - K2H0142US AND (1) 9003KAE1B = 9003K2XH003US, Part # 836-00421 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 068: CONTACT BLOCK, 1 NO & 1 NC; WITH MOUNTING COLLAR, SQR D ZB5AZ105, CAN BE USED FOR MOMENTARY PUSH BUTTON; SIZE: 22mm; MAX VOLTAGE: 600V;, Part # 836-00436 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 069: OPERATOR, PUSH BUTTON; 22mm W/6 COLOR CAPS; SQR D, ZB5BA9 (ZB5AA9). CAN BE USED WITH 836-00436 CONTACT BLOCK.Enclosure Rating: Nema 1/2/3/4/4X/12/13; IP65, Part # 836-00437 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 070: PLASTIC 20 MM SWITCH, ROTARY CAM 2 P 2 T SWITCH SELECTOR - 2 POSITION - NON-ILLUMINATED - (2NO-2NC) - W/ BASE (FOR NEMA 4X) - SQ.D ; QTY 1 #ZB5AD2 SWITCH; QTY 1 # ZB5AZ105 BASE 1NO,1NCQTY 1 # ZBE205 1NO,1NC, Part # 836-91091-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 071: CABINET, NEMA 4 & 12, 24"H, 30"W,8"D, HOFFMAN # CSD24308 USES: SUB-BASE 003-00436, IF KEY LOCK HANDLE REQUIRED USE 997-08195-000, Part # 848-01905-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 072: LIGHT, "RED" LED; OIL TIGHT; SQR D, XB5AVG4, Part # 881-00181 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 073: LIGHT, "GREEN" LED; OIL TIGHT; SQR D, XB5AVG3, Part # 881-00182 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 074: LIGHT, "WHITE" LED; OIL TIGHT; SQR D, XB5AVG1, Part # 881-00184 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 075: COUPLING, DRIVE; 5/8" 3/16KW X 7/8" 3/16KW (LOVEJOY, L090) FLEXIBLE DRIVE; 3/16x3/32 KEYWAY LOVEJOY, L090 *** MARK ITEM ATTN: ASSEMBLY DEPT ***, Part # 819-00136 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 076: MOTOR, ELECTRIC - 1HP - 208-230/460/3/60 - 3600 SRPM - (ALSO LABELED: 3/4HP - 190/380/3/50 - 3000 SRPM) - NEMA 56T FRAME - OPEN DRIP PROOF - C-FACE MOUNTING - 5/8" SHAFT AS PER DRAWING 74-514 - CONT. DUTY @ 40DEG C. AMBIENT - 1.15 SERVICE FACTOR MIN. - BALL BEARINGS - LOCKED AT SHAFT END - (FULL LOAD EFFIC. 74%) UL & CSA APPROVED AND MARKED SEE FLANGE AND SHAFT DRAWING NO. 074-00514 REV M - MARATHON - PRIMARY MODEL #5K38PN47 K220, Part # 894-00928 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 077: PUMP, OIL; 60GPH; 300PSI; 3450 RPM; 2 STAGE; 7/16" DIAMETER SHAFT; WEBSTER #2V022C-5D020, Part # 901-00498 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 078: ORIFICE, SIEMENS #AGA25.2, Part # 048-00917-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 079: SPRING, GAS PRESSURE REGULATOR - 0-8.5"WC - UNPAINTED - SKP25 - SIEMENS #AGA29 **DO NOT PURCHASE - THIS SPRING IS STANDARD IN THE SKP25 REGULATING ACTUATOR**, Part # 082-00223 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 080: VALVE, BALL, 2-1/2", THREADED, BRASS, UL APPROVED AS A GAS SHUTOFF VALVENIBCO TFP600 OR EQUAL, Part # 223-00030-000 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 081: SWITCH, HIGH GAS PRESS SPDT; W/ M.R. 2-20"WC; SIEMENS, QPH31.050M00, Part # 817-01031 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 082: SWITCH, LO GAS PRESS SPDT; WMR 7-55"WC; SIEMENS, QPL31.140M00, Part # 817-01032 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 083: VALVE, DOUBLE GAS MTRZD;1-1/2" (SIEMENS VGD20.403U), Part # 940-01769 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 084: VALVE, BALL TYPE - 1-1/2" NPT - BRASS BODY - (NIBCO - T-FP600A) SCREWED W/HANDLE - APPRVLS: (THREADED) UL - CSA - FM - ALT:(MILWAUKEE VALVE #BB2-100), Part # 941-00127 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 085: VALVE, MANUAL BALL; 1/4" FPT BOTH ENDS; 450PSI MAX; -4 TO 250 DEG TEMP RANGE; RUB VALVE INC., S.35;, Part # 941-00669 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 086: ACTUATOR, GAS VALVE, ON-OFF; W/POC,(SIEMENS SKP15.011U1) ON/OFF OPERATION, 120VAC, POC, SPDT AUXILIARY SWITCH, NEMA 1, 2, 5, AND 12 APPROVALS: UL, FM, CSA, GE GAP, Part # 945-00160 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; LI 087: ACTUATOR, GAS VALVE, REGULATING (SIEMENS SKP25.013U1) SAFETY SHUTOFF VALVE AND CONSTANT PRESSURE REGULATOR, VISUAL STROKE POSITION INDICT APPROVALS: UL, FM, CSA, GE GA (MODEL # WAS SKP20.110U17) THIS ACTUATOR IS SHIPPED WITH IC'S 082-00223 UNPAINTED SPRING INSTALLED AS STANDARD, Part # 945-00164 -Note: Exact part number or equivalent but it must be compatible with (below mentioned machine/equipment name, model number and serial number). -BURNER MODEL NO. VLG-80 SZ-3 (PF) SERIAL NUMBER: S60685-1; S60685-2; S60685-3, 3, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, U.S. Embassy Islamabad, Pakistan intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. U.S. Embassy Islamabad, Pakistan is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a �Brand Name Only � procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer �s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer �s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. All bid prices must include shipping FOB Destination CONUS (CONtinental U.S.). No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acquisition.gov/far/ (a) The provider of information technology shall certify applications are fully functional and operate correctly as intended on systems using the Federal Desktop Core Configuration (FDCC). This includes Internet Explorer 7 configured to operate on Windows XP and Vista (in Protected Mode on Vista). For the Windows XP settings, see http://csrc.nist.gov/itsec/guidance_WinXP.html and for the Windows Vista settings, see: http://csrc.nist.gov/itsec/guidance_vista.html. (b) The standard installation, operation, maintenance, update, and/or patching of software shall not alter the configuration settings from the approved FDCC configuration. The information technology should also use the Windows Installer Service for installation to the default �program files � directory and should be able to silently install and uninstall. (c) Applications designed for normal end users shall run in the standard user context without elevated system administration privileges. (d) The Department of State currently intends to use Vista in Protected Mode in the future when all devices at all worldwide locations have sufficient capacity to permit an upgrade from the XP operating system. Pursuant to the Trade Agreements Act (19 U.S.C. 2512(a)) (TAA), Federal acquisitions of supplies may be made only from offerors that will supply products of an eligible country under any of the free trade agreements entered into pursuant to the TAA. An article is considered a product of a country only if it is wholly a product of that country or if it has been �substantially transformed � in that country into a new and different article of commerce with a name, character, or use distinct from that of the original article(s). Note that any item that is a discreet article as it is sold in commerce, regardless of its ultimate function or use, cannot be considered �substantially transformed � based solely on its integration into IT or other systems. The Contractor and its employees shall exercise the utmost discretion in regard to all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer. All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do no cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/b2a16b8a8d890d0898cca8a6d6cffb32)
Place of Performance: Address: North Brunswick, NJ 08902; Zip Code: 08902
Record: SN05077253-W 20180908/180906232826-b2a16b8a8d890d0898cca8a6d6cffb32 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

44 -- Boiler / BURNER SPARE PARTS