SOLICITATION NOTICE
20 -- MARINE WATER TIGHT HATCH
- Notice Date
- 7/13/2018
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332321
— Metal Window and Door Manufacturing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC), 2401 Hawkins Point Road, Building 31, Mail Stop 26, Baltimore, Maryland, 21226-5000, United States
- ZIP Code
- 21226-5000
- Solicitation Number
- 70Z08018QP45K90
- Archive Date
- 8/7/2018
- Point of Contact
- Yvette R Johnson, Phone: 410-762-6263
- E-Mail Address
-
Yvette.R.Johnson@uscg.mil
(Yvette.R.Johnson@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) FTID 1-162-1 36 x 36 FLUSH QUICK ACTING WATERTIGHT SCUTTLE, GAL STEEL 18 INCH, ITEM NO. 8 SMY #44 DWG 905 WMEC 167-001 REV K DETAIL DWG 805-1623054 MFG: USCG DRAWINGS/SPECIFICATION End Use: WPB CLASS CUTTER Quantity: 01 EACH Item 2) WTH 1-216-2 36 x 36 RAISED QUICK ACTING WATERTIGHT HATCH, WITH 18 INCH SCUTTLE, STEEL, ITEM NO. 14 SMY #39 DWG 905 WMEC 167-001 REV K DETAIL DWG 805-1624087 MFG: USCG DRAWINGS/SPECIFICATION End Use: WPB CLASS CUTTER Quantity: 01 EACH Item 3) WEATD 02-106-0 26 1/8 INCH X 66 1/8 INCH WEATHER TIGHT DOOR INCLUDES PANEL AND FRAME, ALUM, 9 RH SWING ITEM NO. 15, SMY #23, DWGF 905-WMEC0167-001 REV K, DETAIL DWG, FL-1602-48 MFG: USCG DRAWINGS/SPECIFICATION End Use: WPB CLASS CUTTER Quantity: 01 EACH Item 4) WEATD 02-69-2, 26 1/8 INCH X 66 1/8 INCH, WEATHERTIGHT DOOR INCLUDES PANEL AND FRAME, ALUM LH SWING, ITEM NO. 12, SMY #28 DWG 905 WMEC 167 REV 001, DETAIL DWG, FL-1602-48 MFG: USCG DRAWINGS/SPECIFICATION End Use: WPB CLASS CUTTER Quantity: 01 EACH Item 5) RWTH 01-24-1, 24 X 24 RAISED WATER TIGHT HATCH, 5 PSDI, STEEL, ITEM NO. 17, SMY # 36, DWG 90W E,EC 167-001, REV K DETAIL DWG, MFG: USCG DRAWINGS/SPECIFICATION End Use: WPB CLASS CUTTER Quantity: 01 EACH Item 6) RWTH 01-44-2, 36 X 36, RAISED WATER TIGHT HARCH STEEL, ITEM NO. 18, SMY #37. DWG 905 WMEC 167-001 REV K, DETAIL DWG 805-1624070 MFG: USCG DRAWINGS/SPECIFICATION End Use: WPB CLASS CUTTER Quantity: 01 EACH The items are used on USCG Legare. All items will be individually packaged and bar-code in accordance with Coast Guard specification IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, packaging and marking, Individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCGC Legare, 4000 Coast Guard Blvd, Portsmouth, VA 23703 Required delivery date no later than: Nov 16, 2018 This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-97 (Jan 2018) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 332321. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13 All responsible sources may submit a quotation via email to Yvette.R.Johnson@uscg.mil, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (SAM) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is JULY 23, 2018, at _10:00 AM Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (March 2016); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (March 2016) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (May 2015); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (JAN 2018). The following clauses listed within FAR 52.212-5 are applicable: FAR 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011)(15 U.S.C. 644), FAR 52.219-28, Post Award Small Business Program representation (Jul 2013)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (April 2015)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (July 2014); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (May 2014); FAR 52.225-3, Buy American Act-Free Trade Agreement (May 2014)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (July 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGELC/70Z08018QP45K90/listing.html)
- Record
- SN04991034-W 20180715/180713230825-4764f1a221a9c2a027787e1ada104604 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |