SOURCES SOUGHT
Z -- Mill Creek Needle Gate Repair
- Notice Date
- 6/11/2018
- Notice Type
- Sources Sought
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Walla Walla, Attn: CENWW-CT, 201 North 3rd Avenue, Walla Walla, Washington, 99362-1876, United States
- ZIP Code
- 99362-1876
- Solicitation Number
- W912EF18RSS37
- Archive Date
- 6/28/2018
- Point of Contact
- Cynthia Jacobsen, Phone: 509-527-7203
- E-Mail Address
-
cynthia.h.jacobsen@usace.army.mil
(cynthia.h.jacobsen@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- The US Army Corps of Engineers, Walla Walla District is seeking interested bidders for a construction contract titled: Mill Creek Needle Gate Replacement. The construction will at the Mill Creek Levee in Walla Walla, Washington. This will be a firm-fixed-price construction contract. Construction magnitude is estimated to be between $100,000 and $250,000. A performance bond and an irrevocable letter of credit will be required. The North American Industry Classification System (NAICS) code for this project is 237990 and the associated small business size standard is $36,500,000. This sources-sought announcement is a tool to identify interested businesses with the technical experience and capability to accomplish this work. This is not a solicitation. Only those firms who respond to this announcement by submitting the following information will be used in determining whether to set aside this requirement. A.)Provide A capability statement expressing interest in this requirement, a list of no more than five current or past projects demonstrating technical experience with work of a similar and/or relevant nature to that listed in the Summary of Scope of Work. For each project submitted, provide a brief narrative statement of the work involved, your firm's role in the project, the dollar value and the completion date. Include a statement detailing any special qualifications and certifications, applicable to the scope of this project, held by your firm and/or in-house personnel. B.)A list of references for each of the projects submitted in A.) above. Include the point of contact, title, phone number and email address. C.)Provide a statement of your firm's business size (HUBZone, Service Disabled Veteran Owned, 8(a), small disadvantaged, or woman-owned) with regards to the NAICS code listed above. D.)Provide a statement that your firm intends to submit an offer on the project when it is advertised. E.)Provide a statement of your firm's bonding capacity. A statement from your surety is NOT required. F.)Cage Code and DUNS number. Submit this information to cynthia.h.jacobsen@usace.army.mil, Contract Specialist, via email. Your response to this notice must be received on or before 2:00 PM Pacific Time on June 27, 2018. Summary of Scope of Work: This project consists of replacing the needle gates at the Division Works of the Mill Creek Project. The existing needle gates are made of wooden slats laid vertically at an angle and secured in place against the road bridge. There is currently an electrical conduit that is mounted under the bridge that passes through a hole in the needle gates. An amount of silt and debris has accumulated in the basin downstream of the needle gates and accompanying radial gate. The replacement effort involves removal and disposal offsite of the existing wooden slats, and removal and disposal offsite of up to 20 cubic yards of material from the downstream basin. Three new runs of electrical conduit will be installed under the road, with one run being used to re-route the existing electrical power line that currently routes under the bridge. The new electrical power line will be reconnected on both ends. The needle gates will be replaced with three new precast concrete panels at one foot thick, one of which is no larger than 16 feet by 8 feet, the other two of which are no larger than 6 feet by 8 feet. The panels will be lifted into place vertically and secured at top and bottom. The larger panel will be grouted in place to create a watertight seal, while the smaller panels will have rubber seals. A new painted steel bulkhead made of 3x3x1/4" HSS tubing and 1/4" skin plate will be fabricated and mounted between the two smaller concrete panels. The steel bulkhead will be no larger than 5 feet by 8 feet, and will be painted with a vinyl paint system for submerged conditions. The steel bulkhead will contain a combination sluice and weir gate, with the weir gate made of two telescoping leaves. The seals and rub-blocks will be made of UHMW, and the combination sluice and weir gate will be made of stainless steel. The combination gate will cover an opening no larger than 2 feet by 5 feet, and will have two manual bevel operators with hand-wheels, one to control the sluice section, and one to control the weir leaves. The steel bulkhead with the assembled and mounted combination gate will be lifted into place vertically and secured at top and bottom and to the concrete panels on both sides. In water fish window begins 15 July, 2019. However, pre-work can begin after notice to proceed is given. Solicitation estimated to be posted near August 2018. Award estimated to be in September 2018.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA68/W912EF18RSS37/listing.html)
- Place of Performance
- Address: 3211 Reservoir Rd., Walla Walla, Washington, 99362, United States
- Zip Code: 99362
- Zip Code: 99362
- Record
- SN04950916-W 20180613/180611230902-2520fb6dbfe6404ebf29593d82676d97 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |