Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MAY 16, 2018 FBO #6018
DOCUMENT

65 -- 580-18-3-167-0224 Crash Cart Purchase VA256-18-AP-7169 - Attachment

Notice Date

5/14/2018
 

Notice Type

Attachment
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

Department of Veterans Affairs;Acquisition & Materiel Management;Michael E. DeBakey VA Medical Center;2002 Holcombe BLVD;Houston TX 77030 4298
 

Solicitation Number

36C25618Q9413
 

Response Due

5/23/2018
 

Archive Date

6/22/2018
 

Point of Contact

Orita A Jarvis
 

E-Mail Address

1-1414<br
 

Small Business Set-Aside

N/A
 

Description

DEPARTMENT OF VETERANS AFFAIRS VETERANS INTEGRATED SERVICE NETWORK (VISN) 16 MICHAEL E. DEBAKEY VA MEDICAL CENTER (VAMC), HOUSTON, TEXAS REQUEST FOR INFORMATION 36C25618Q9413 BACKGROUND: The Houston VAMC has a requirement for the following brand name supplies: Each vendor s offering will include an on-site presentation, a written proposal, and a technical delivery plan. Specifications Description QTY Width tolerance +2 /- 1, Depth + 2 /- 1. Height +2 /-1 Cart shall be of sturdy metal based construction. Acceptable materials include Steel and Aluminum Platform measures 28 x 30 Exposed surfaces must be treated to prevent rust or other oxidation from normal usage and repetitive cleaning. NO slide out work surfaces are requested. Metal Base Construction, Dual-locking, Five (5) drawer RED Crash Cart on wheels. 29 W x 24.5 D x 42 H 100 Removal and Disposal of old equipment Delivery and Installation Service Drawer # Size (inches) Owner DRAWER NAMES 1 6 Pharmacy MEDICATIONS 2 3 Pharmacy FLUIDS AND ABG SYRINGES 3 3 Logistics NEEDLES AND SYRINGES 4 6 Logistics INTUBATION/SUCTION 5 9 Logistics IV SUPPLIES/MISC Specifications: Drawer names must be at least 1 tall and replaceable in case changes are made in the future. Black ink on white background preferred. Drawers must extend fully to allow access to entire drawer and have safety mechanism to prevent accidental drawer removal while opening. Drawer rails must be able to support a minimum of 25lbs per drawer without flexing. Dual-locking system (Drawers 1 and 2 will be on one-lock, and Drawers 3-5 will be on second lock) Lockable Castor wheels of no less than 4-inch diameter. All wheels must allow 360-degree steering. 4-sided rubberized bumper to protect cart and facility walls. Accessories for crash cart (All directions relative to facing the side with the drawers towards user) Top of crash cart: plastic tray top (exchangeable) Corner rails shall be channeled to allow for flexible accessory placement Back Right Corner: Defib stand (compatible with Zoll R-series Plus Defibrillator). Stand must be able to swivel 360 degrees. Right Side Front Corner: O2 tank bracket capable of securing a e-cylinder size tank with Oxytote holder/regulator Back Left Corner: IV pole (2-pole) Back Side Lower Left: NFPA99 compliant Health grade power strip with minimum 6 outlets, 12A/125VAC, minimum 7ft cord. Cord management bracket should be located near strip for storage of cord while in transport. Left Side: Handles for pushing cart. Left side near top: Folder slot or binder holder for at least one standard 1 three binder Left side, near bottom: Accessory plate to allow for mounting of adapter bracket for L190-GR suction pump (bracket P/N L200-010).Brackets will be furnished by the Government for installation either onsite during delivery or at factory. http://www.alliedhpi.com/docs/90-00-0005-LSP-Advantage-Emergency-Portable-Suction-Unit-May2017.pdf Back: Backboard holder (on back) with backboard REQUESTED RESPONSES: The intent of this Request for Information is to establish sources in order to define the procurement strategy. Interested contractors are requested to respond in accordance with the following Please respond to this RFI if you are capable of providing the brand name products listed in the table found in the background section above. In the response please cite business size status. Please respond to this RFI if you are capable of providing supplies that can be determined EQUIVALENT to the products listed in the table found in the background section above. You MUST provide SPECIFICATIONS AND DETAILS on proposed EQUIVALENT products such as Manufacturer Name, Part Number, and Description. If applicable, include GSA contract information. It is critical that you specify if you are providing brand name or an equivalent product. (Capability Statement) CONTACT INFORMATION AND RESPONSE DUE DATE: Please email all responses to Orita.Jarvis@va.gov Please respond to this RFI no later than 12:00pm Central on Wednesday 23, 2018. DISCLAIMER: This RFI is issued solely for informational and planning purposes and does not constitute a solicitation. Responses to this notice are not offers and cannot be accepted by the Department of Veterans Affairs to form a binding contract. Respondents are solely responsible for all expenses associated with responding to this RFI.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/HoVAMC/VAMCCO80220/36C25618Q9413/listing.html)
 

Document(s)

Attachment
 

File Name: 36C25618Q9413 36C25618Q9413.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4302518&FileName=36C25618Q9413-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4302518&FileName=36C25618Q9413-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: 2002 Holcombe Blvd;Houston, TX

Zip Code: 77030
 

Record

SN04921506-W 20180516/180514230758-06f94bab657c186444f564ded9fc4674 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |