SOURCES SOUGHT
Y -- UT FLAP 3108(1), Cascade Springs Road
- Notice Date
- 4/24/2018
- Notice Type
- Sources Sought
- NAICS
- 237310
— Highway, Street, and Bridge Construction
- Contracting Office
- Department of Transportation, Federal Highway Administration (FHWA), Central Federal Lands Highway Division, 12300 West Dakota Avenue, Lakewood, Colorado, 80228
- ZIP Code
- 80228
- Solicitation Number
- 6982AF18SS0008
- Archive Date
- 5/23/2018
- Point of Contact
- Craig Holsopple, Phone: 720-963-3350
- E-Mail Address
-
craig.holsopple@dot.gov
(craig.holsopple@dot.gov)
- Small Business Set-Aside
- N/A
- Description
- THIS IS NOT A REQUEST FOR BID - PLANS AND SPECIFICATIONS ARE NOT AVAILABLE. THIS NOTICE IS BEING ISSUED TO DETERMINE IF THERE IS SUFFICIENT INTEREST FROM QUALIFIED PRIME CONTRACTORS who are Small Businesses, HUBZone small businesses, Woman owned small business concerns, 8(a) small businesses, or Service disabled veteran-owned small businesses and who intend to submit a bid for this solicitation to allow for a set-aside in one of these programs MUST submit the following by e-mail to CFLAcquisitions@dot.gov or by telefax to 720-963-3360 (Attn: Craig Holsopple) for receipt by close of business (2 p.m. local Denver time) on May 8, 2018: (1) A positive statement of your intention to submit a bid for this solicitation as a Prime Contractor; (2) A copy of the letter from SBA stating date of HUBZone small business certification or acceptance to the 8(a) small business program. In the case of a Service Disabled Veteran Owned Small Business Concern, you must provide proof of eligibility (DD form 214 or a letter of adjudication from the Veterans Administration). This information must be provided in order to determine eligibility - DO NOT SEND COPIES OF YOUR CCR PROFILE; (3) Letter from bonding agent stating your firm's capability to bond for a single project of $12.5 million, and your firm's aggregate bonding capacity; and (4) Provide a list of road construction projects of equal or greater value and scope to the UT FLAP 3108(1), Cascade Springs Road project in which you performed ( as the prime contractor ) cut slopes, embankment, anchored mesh surface treatment, reinforced soil slopes, aggregate base course, and paving. State whether your firm was the prime contractor or subcontractor on the project. DO NOT SEND INFORMATION ON PROJECTS THAT DO NOT INCLUDE THE ABOVE WORK. The size of a small business firm includes all parents, subsidiaries, affiliates, etc. Refer to the Code of Federal Regulations 13 CFR 121.103 for information on how the SBA determines affiliation and 13 CFR 121.108 regarding the penalties for misrepresentation of size status. All firms should be certified in the All firms should be certified in the System for Award Management (SAM) located at https://www.sam.gov/ A Qualified HUBZone SBC receiving a HUBZone contract for general construction must spend at least 50% of the cost of the contract incurred for personnel on its own employees or employees of other qualified HUBZone SBCs. This requirement may be met by expending at least 50% of the cost of the contract incurred for personnel on its employees or it may subcontract at least 35% of the cost of the contract performance incurred for personnel to one or more qualified HUBZone SBCs. A qualified HUBZone SBC prime contractor may not, however, subcontract more than 50% of the cost of the contract incurred for personnel to non-qualified HUBZone SBCs. PROJECT DETAILS: PROJECT DETAILS: UT FLAP 3108(1), Cascade Springs Road The proposed project consists of rehabilitation of Cascade Scenic Drive (FR114) and reconstruction of Cascade Springs Road, beginning at the junction of SR-92 and continuing easterly approximately 12 miles towards Heber City, Utah. Major work elements for Cascade Scenic Drive include pulverizing the existing roadway asphalt, shoulder work at various locations, and paving over the reclaimed base. Major work elements of Cascade Springs Road include vertical and horizontal alignment changes to correct roadway geometry, improve safety, and improve operations, including the intersection leading into Cascade Springs. Cascade Springs Road construction will generally include cut slopes, embankment, anchored mesh surface treatment, reinforced soil slopes, aggregate base course, and paving. Improvements to both Cascade Scenic Drive and Cascade Springs Road include clearing roadside vegetation, stabilization of shoulders, rock scaling, drainage improvements, guardrail, and updating signing and pavement markings. Select pullouts and parking areas will also be rehabilitated. SIGNIFICANT QUANTITIES: Item Unit Estimated Quantity Clearing and Grubbing ACRE 36 Roadway Excavation CUYD 137,000 RipRap CUYD 4,500 Anchored Wire Mesh SQYD 4,000 Reinforced Soil Slope SQFT 10,000 Aggregate Base TON 27,000 Pulverizing SQYD 93,000 Hot-asphalt concrete pavement TON 29,000 Culverts LNFT 3,600 Concrete Curb LNFT 10,000 Guardrail LNFT 2,500 It is anticipated that this project will be advertised in Fall of 2018. The contracting range for this project is between $9.5 and $12.5 million dependent upon the Option(s) awarded. Construction is anticipated March, 2019 thru August, 2020.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOT/FHWA/68/6982AF18SS0008/listing.html)
- Place of Performance
- Address: near Heber City, Utah, 84032, United States
- Zip Code: 84032
- Zip Code: 84032
- Record
- SN04899223-W 20180426/180424230520-1c725d464d975b2793ca66dc6e3f5d3d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |