SOURCES SOUGHT
20 -- Boat Davit Parts - Sources Sought
- Notice Date
- 3/29/2018
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, Mid-Atlantic Regional Maintenance Center - N50054, PO Box 215, Building 51, 2nd Floor, Portsmouth, Virginia, 23705-0215, United States
- ZIP Code
- 23705-0215
- Solicitation Number
- N50054-18-T-0021
- Archive Date
- 4/19/2018
- Point of Contact
- Deborah Rae Struebing, Phone: 757-400-0243, Code 412 Group Email, Phone: 757-400-0747
- E-Mail Address
-
deborah.struebing@navy.mil, MARMC_NRFK_412_IDIQ_FIXED_PRICE@navy.mil
(deborah.struebing@navy.mil, MARMC_NRFK_412_IDIQ_FIXED_PRICE@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- Notice of Sources Sought This announcement constitutes a sources sought synopsis for written information only. This is not a solicitation announcement for proposals and a contract will not be awarded from this announcement. This sources sought notice is not to be construed in any way as a commitment by the Government, nor will the Government pay for the information submitted in response. Mid-Atlantic Regional Maintenance Center (MARMC) is seeking Long Lead Time Material for use in the Boat Davit Parts P/N 56W4-S100, only the material items listed in the table below, shall be used on the DDG 51 Class vessels. No similar or substitute items have been authorized. Further inspections, engineering testing and approvals must be needed to use similar or substitute items, which will inevitably jeopardize the production completion date (PCD) that has been scheduled and will in turn negatively affect the USS COLE's mission. Mid-Atlantic Regional Maintenance Center (MARMC) intends to solicit and negotiate with only one source under the authority of 41 U.S.C. 3304(a) (1) FAR 6.302-1(b) (1) "Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements." "When there is a reasonable basis to conclude that the agency's minimum needs can only be satisfied by - (i) Unique supplies or services available from only one source or only one supplier with unique capabilities." The MARMC of Norfolk, Virginia is seeking to identify qualified and experienced sources to furnish parts listed below to be used in COLE'S FY-18 EDSRA will be installed by the LMA per work item 583-11-001 on SSP: TPPC-DDG67-MARMCN18-CN01. QTY UI Description Part Number 1 KT Davit, Slad, Overhaul Kit OH56W4-S100-PM240-0004 1 EA Pin, Pivot 56W4-S101 Pc51 1 EA Endplate NSWCCD Sketch 7317 Pc7 1 EA O-ring 2-346 1 EA O-ring 2-381 1 EA O-ring 2-234 1 EA O-ring 2-229 1 EA Gasket 56W4-S118Pc154 1 EA O-ring 2-347 1 EA O-ring 2-230 1 EA O-ring 2-228 1 EA Seal, Oil 63-0329 1 EA O-ring 2-147 1 EA Gasket 56W4-S118 Pc228 1 EA Bearing, Roller 22215 CCK 1 EA O-ring 2-159 1 EA O-ring 2-145 1 EA Shield, Grease 100-S66 1 EA O-ring 568386 1 EA Sleeve 56W4-S104 Pc43 2 EA Bearing,Circular (3.500 bore) 56W4-S104,047 1 EA Sleeve 56W-S104 Pc41 1 EA Plate, Key 56W4-S101 Pc56 2 EA Rubber Pad 56W4-S101 Pc52 1 EA Rubber Pad 56W4-S101Pc71 1 EA Lock Plate w/Lock Screws and Wire P48 1 EA Shim, Laminate 56W4-S102 Pc41 QTY UI Description Part Number 1 EA Cable/Pin Assembly 56W4-S116 Pc6 1 EA Coupling,Flexible (Browning) FS7Q,Type 2 1 EA Shim Set 56W4-S118 Pc152 1 EA Shim Set 56W4-S118 Pc155 1 EA Spring, Torsion 56W4-S117 Pc66 1 EA Spring, Torsion 56W4-S117 Pc67 1 EA Shim Set 56W4-S117 Pc75 1 EA Cable/Pin Assy 56W4-S116 Pc6 1 EA Shim 100-45-S 1 EA Shim 100-46-S 1 EA Shim 100-46-S-010-9 2 EA Shim 56W4-S104 Pc53 2 EA Pad 56W4-S105 Pc23 1 EA Shaft, Main Drive 56W4-S102 Pc19 1 EA Electric Clutch Assy FEA04759 99 135100-100VDC 1 EA Gear Set Assembly (Worm,WormGearRing,Hollow Shaft) 8015C-235/S523 4 EA Plate, Key 56W4-S101Pc55 1 EA Fluid Brake Model 190CF Special The appropriate NAICS code is 336611, with a small business standard of 1250 employees. Reponses to this Sources Sought shall include the following information in this format: 1. Company name, address, point of contact name, phone number, fax number and email address. 2. Contractor and Government Entity (CAGE) Code. 3. Business Size - Large Business, Small Business, Small Disadvantage, 8(a), Hubzone, Woman-owned and/or Veteran-owned. 4. Capability statement. 5. Include any other supporting documentation. Responses should be emailed to by 4 April 2018 by 10:00 a.m. Deborah "Rae" Struebing; deborah.struebing@navy.mil and a copy to: MARMC_NRFK_412_IDIQ_FIXED_PRICE@navy.mil Contracting Office Address: Mid-Atlantic Regional Maintenance Center (MARMC) 9727 Avionics Loop Norfolk, VA 23511-2124 Point of Contact(s): D. Rae Struebing 757-400-0243 deborah.struebing@navy.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/4f5f021c17480a8c86308fcf231d05a0)
- Record
- SN04871341-W 20180331/180329231331-4f5f021c17480a8c86308fcf231d05a0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |