MODIFICATION
70 -- VTC Upgrade
- Notice Date
- 3/16/2018
- Notice Type
- Modification
- Contracting Office
- Building 1001 761st Tank Battalion Ave, Fort Hood, TX 76544
- ZIP Code
- 22030
- Solicitation Number
- W91151-18-T-KB01
- Response Due
- 3/22/2018
- Archive Date
- 9/18/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W91151-18-T-KB01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-97. The associated North American Industrial Classification System (NAICS) code for this procurement is 334111 with a small business size standard of 1,000.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-03-22 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Hood, TX 76544 The MICC Fort Hood requires the following items, Brand Name or Equal, to the following: LI 001: Cisco SX80, Precision 60 Cam, Touch, 1, EA; LI 002: Services, 1, EA; LI 003: Pwr Cord US 1.8m Black YP 12 To YC 12, 3, EA; LI 004: License key to activate sw encryption module, 1, EA; LI 005: Presentation cable w/audio, VGA/Jack to DVI/Phoenix, 1, EA; LI 006: 12.5 meter flat grey Ethernet cable for Touch 10, 1, EA; LI 007: Power Injector (802.3af), 1, EA; LI 008: Power Supply 12 VDC 40W, 1, EA; LI 009: 4 meter flat grey Ethernet cable for Touch 10, 1, EA; LI 010: Cisco TelePresence Precision 60 Camera auto expand only, 1, EA; LI 011: Touch 10 auto expand, 1, EA; LI 012: SX80 rack ears for auto expand only, 1, EA; LI 013: Cisco SX80 Codec, 1, EA; LI 014: SW Image for SX80, MX700, MX800, 1, EA; LI 015: Cisco SX80 Codec kit, 1, EA; LI 016: Pwr Cord US 1.8m Black YP 12 To YC 12, 1, EA; LI 017: Biamp Tesira Forte' TI AVB, 1, EA; LI 018: Biamp Tesira Expansion 16 logic input/output, 2, EA; LI 019: PHIHONG Gigabit PoE+ Injector, IEEE802.3af compliant, IEEE802.3at classi, 2, EA; LI 020: Condenser Boundary Microphone with push to talk and LED indicator, 4, EA; LI 021: 12" Gooseneck Desktop Push to talk microphones with LED indicator, 6, EA; LI 022: 2 Way Ceiling speakers, 112DB sensitivity, 140 degree dispersion pattern, 8, EA; LI 023: 2 channel professional series amplifier, 250 watts channel at 70V, 1, EA; LI 024: 75" 500Nit Edge Lit 4K UHD LED Commercial Display for Business, 2, EA; LI 025: 58" 4K UHD Display with Customer First 3 year warranty and quad view pr, 1, EA; LI 026: Chief Fusion Wall Tilt LTM1U Wall Mount for Flat Panel Display, 1, EA; LI 027: Chief Tilting Wall Mount, 2, EA; LI 028: Crestron 16 Port POE private switch, 1, EA; LI 029: Transition Networks 10/100/1000 Ethernet Media Converter Stand Alone, 1, EA; LI 030: CAT6 REMOTELY CONTROLLED LAYER 1 A/B SWITCH LATCHING, 1, EA; LI 031: Alpha LED Single Line signs to display room classification, 2, EA; LI 032: Control System, 1, EA; LI 033: 10.1 Touch Screen, Black Smooth without Camera or microphone, 1, EA; LI 034: Tabletop Kit for TSW 1060, Black Smooth, 1, EA; LI 035: Cisco Precision 60 Camera Extender Kit, 1, EA; LI 036: Crestron Wall Plate 4K DigitalMedia 8G+Â Transmitter 100, White Textur, 4, EA; LI 037: Decorator Style Faceplate, 1 Gang, White Textured, 4, EA; LI 038: DigitalMedia 8G+Â Transmitter 202 with 2HDMI input, 1 VGA input, and 1, 6, EA; LI 039: DM 8G+ Recevier & Room Controller W/Scaler, 3, EA; LI 040: 16 x 16 DigitalMedia Switcher /Red ndant Po er Supply, 1, EA; LI 041: 4K HDMI Input Card, 6, EA; LI 042: Crestron Output Card, 2, EA; LI 043: 2 Channel HDMIÃ Â Output Card for DMÃ Â Switchers, 1, EA; LI 044: DM 4K Dual HDMI Output, 1, EA; LI 045: Crestron DM8G+ INPUT CARD, 10, EA; LI 046: 6ft MicroFlex Pro AV/IT Series High Speed HDMI Cable with ProGrip, 4, EA; LI 047: 9ft MicroFlex Pro AV/IT Series High Speed HDMI Cable with ProGrip, 10, EA; LI 048: 10ft Pro AV/IT Advanced Series Series 24 AWG High Speed HDMI Cable wi, 15, EA; LI 049: 5 in 1 HDMI dongle, 4, EA; LI 050: 3ft Ultra Flexible High Speed HDMI Cable with Low profile connectors, 5, EA; LI 051: 6ft Ultra Flexible High Speed Cable with Low profile connectors, 15, EA; LI 052: 6ft Cat6 Snagless Unshielded (UTP) Network Patch Cable, 5, EA; LI 053: 10ft Cat6 Snagless Unshielded (UTP) Network Patch Cable, 5, EA; LI 054: 15ft Cat6 Snagless Unshielded (UTP) Network Patch Cable, 5, EA; LI 055: 10FT Shielded Cat6a premade patch cable, 2, EA; LI 056: 20FT Shielded Cat6a premade patch cable, 2, EA; LI 057: Cat6 Eight Conductor Modular Plug, Shielded, 50, EA; LI 058: RJ 45 Strain Relief Boots, 50, EA; LI 059: CAT6+ Shielded KeyConnect RJ45 female jack, 4, EA; LI 060: CAT6 Enhanced, Shielded, Plenum, spool in a box, Blue 500ft, 4, EA; LI 061: 500ft Belden 2C14 Plenum Speaker wire, 1, EA; LI 062: 500ft Belden 2C22 shielded audio and control cable, 2, EA; LI 063: 500ft Belden Cat6 UTP plenum network Cable Yellow, 1, EA; LI 064: Middle Atlantic 44 Space 25" Deep empty rack without rear door, 1, EA; LI 065: Solid Front Door, 44 RU Racks, 1, EA; LI 066: Additional Keys, Standard Front Doors, 1, EA; LI 067: Cable Entry Rear Door, 38 RU BGR Racks, 1, EA; LI 068: Solid Top ERK Series, 1, EA; LI 069: Caster Base, 25"D, ERK Series, 1, EA; LI 070: Rackrail, 10 32, 44 RU, ERK Series, 1, EA; LI 071: Slim Power Strip, 24 Outlet, 20A, 1, EA; LI 072: Lace Strip, 44 RU, 3.25"W, w/Tie Posts, 1 pc., 2, EA; LI 073: Middle Atlantic Shelving 2RU VENTED RACK SHELF, 3, EA; LI 074: 10 32 Rack Phillips Screw with Washers qty 100, 2, EA; LI 075: Middle Atlantic, EB1 CP12, EB1 contract pack, 12 pack, 1, EA; LI 076: Blank Panel, 2 RU, Steel, Flanged, 4, EA; LI 077: Blank Panel, 4 RU, Steel, Flanged, 4, EA; LI 078: Fan Kit, 190 CFM, Rear Doors, 1, EA; LI 079: PROPORTIONAL SPEED THERMOSTATIC FAN CONT, 1, EA; LI 080: Vent Blocker Kit, ERK 25" Deep, 1, EA; LI 081: Filter Kit, Rear Doors, 1, EA; LI 082: Middle Atlantic LBP 4A, 2, EA; LI 083: Middle Atlantic Products LBP 1A Horizontal Lacer Bar, 2, EA; LI 084: Vent Panel, 1 RU, Perforated, 64% Open Area, 3, EA; LI 085: POWER MODULE, 15A CONTROLLED MOD,CORD, 3, EA; LI 086: Chief Metal Stud Anchor Kit, 28 Anchors, 1, EA; LI 087: Miscellaneous material, 1, EA; LI 088: SurgeX UPS w Rack Mount Surge Eliminator and Remote, 120V/20A, 1U a, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Hood intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Hood is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In responding to this request for quote, you must provide the manufacturer's name and part numbers AND salient characteristics of the items you are proposing to sell to the Government. Regardless of the terminology used in each RFQ ("Brand Name or Equal", or "meet minimum stated specifications), the information describing what you are offering must be physically written into the seller's bid specification block. Salient characteristics are defined as "pronounced features of an item that identify it describe its size and composition, functional intent, and/or operational capabilities or limits." When researching product capabilities, you must, as a minimum, respond with feature for feature comparisons in order for your product to be technically evaluated for sufficiency. Responses such as "bidding exact match", "as specified", or cutting and pasting the Government's specification information into the seller's bid specification block are not acceptable responses. Offerors who respond in any of the three examples directly above will be eliminated from the competition without consideration of their offer. If you are bidding the same product as is being requested, your seller bid specification should indicate: "Bidding on Manufacturer (Insert Name) and Part Number (Insert Number). If you are bidding on an "or equal" product, your seller bid specification must state: Bidding on Manufacturer (Insert Name) and Part Number (Insert Number), containing the following salient characteristics (insert salient characteristics). If your response does not contain all of the required information called out in this notice, your quote will be determined nonresponsive and will not be NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (16-MAR-2018); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/notices/42feb20a6138cb995af0126f78c24e3d)
- Place of Performance
- Address: Fort Hood, TX 76544
- Zip Code: 76544-5027
- Country: US
- Zip Code: 76544-5027
- Record
- SN04857966-F 20180318/180316231006 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |