SOLICITATION NOTICE
78 -- Fitness Equipment
- Notice Date
- 3/13/2018
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 1164 W.15th Street, Fort Stewart, GA 31314
- ZIP Code
- 31314
- Solicitation Number
- STEWARTDESFJAH0002
- Response Due
- 3/22/2018
- Archive Date
- 9/18/2018
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is STEWARTDESFJAH0002 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-97. The associated North American Industrial Classification System (NAICS) code for this procurement is 423440 with a small business size standard of 100.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2018-03-22 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Stewart, GA 31314 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: 30lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 30lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 002: 20lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 20lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 003: 35lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 35lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 004: 40lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 40lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 005: 50lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 50lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 006: 45lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 45lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 007: 25lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 25lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 008: 80lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 80lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 009: 70lb Rubber Hex Dumbbell Chrome Plated Handle Handle Diameter: 35MM Proprietary head to handle construction ROGUE 70lb Rubber Hex Dumbbell ( or equal, 1, Pair; LI 010: 70lb Kettlebell Single Piece Casting Wide Flat Machined Base Matte Black Powder Coat Finish Rogue 70lb Kettlebell or equal, 2, EA; LI 011: 53lb Kettlebell Single Piece Casting Wide Flat Machined Base Matte Black Powder Coat Finish Rogue 53lb Kettlebell or equal, 2, EA; LI 012: 35lb Kettlebell Single Piece Casting Wide Flat Machined Base Matte Black Powder Coat Finish Rogue 35lb Kettlebell or equal, 2, EA; LI 013: 20lb Medicine Ball Diameter = 14" Color Black Double Stitched Nylon Seams ROGUE 20lb Medicine Ball or equal, 2, EA; LI 014: 30lb Medicine Ball Diameter = 14" Color Black Double Stitched Nylon Seams ROGUE 30lb Medicine Ball or equal, 2, EA; LI 015: Abmat Dimensions: 15 L x 12 W x 2-1/2 H Low compression set foam and durable vinyl construction Color - BLACK ROGUE ABMAT or equal, 2, EA; LI 016: Flat Pack Games Box 3 in 1 Plyo Box Color - Brown Length = 30" Width = 24" Heigth = 20" Has height options of 20", 24", and 30" Made of all wood ROGUE Flat Pack Games Box 3-in-1 Wood Plyo Box or Equal, 1, EA; LI 017: S-25 Fat Boy Sled Size - 16"x21.5".25 Bent steel Rails 16 5/8" Fold Flat Weight Post 16 foot sled strap and caribiner Loadable Weight = 500lbs Color Black ROGUE S-25 Fat Boy Sled or Equal, 1, EA; LI 018: 28.5MM Olympic Bar weighing 20KG Dual Knurl Marks No center Knurl 190,000 PSI Tensile Strength Steel Composite Bushings Color - Black Zinc Shaft, and Bright Zinc Sleeves ROGUE BAR 2.0 or Equal, 2, EA; LI 019: 45lb Bumper Plate Diameter = 450mm/17.72 inches Collar Opening - 50.40mm/1.98 inches Stainless Steel Inserts ROGUE HG 2.0 BUMPER PLATES or Equal, 3, Pair; LI 020: 35lb Bumper Plate Diameter = 450mm/17.72 inches Collar Opening - 50.40mm/1.98 inches Stainless Steel Inserts ROGUE HG 2.0 BUMPER PLATES or Equal, 3, Pair; LI 021: 25lb Bumper Plate Diameter = 450mm/17.72 inches Collar Opening - 50.40mm/1.98 inches Stainless Steel Inserts ROGUE HG 2.0 BUMPER PLATES or Equal, 3, Pair; LI 022: 15lb Bumper Plate Diameter = 450mm/17.72 inches Collar Opening - 50.40mm/1.98 inches Stainless Steel Inserts ROGUE HG 2.0 BUMPER PLATES or Equal, 2, Pair; LI 023: 10lb Bumper Plate Diameter = 450mm/17.72 inches Collar Opening - 50.40mm/1.98 inches Stainless Steel Inserts ROGUE HG 2.0 BUMPER PLATES or Equal, 2, Pair; LI 024: 5lb Bumper Plate Diameter = 450mm/17.72 inches Collar Opening - 50.40mm/1.98 inches Stainless Steel Inserts ROGUE HG 2.0 BUMPER PLATES or Equal, 2, Pair; LI 025: 2.5lb Bumper Plate Diameter = 450mm/17.72 inches Collar Opening - 50.40mm/1.98 inches Stainless Steel Inserts ROGUE HG 2.0 BUMPER PLATES or Equal, 2, Pair; LI 026: Power Rack 2x3" 11 Steel Gauge 5/8 Bolts and Fasteners West Side Hole Pattern 1 through bench and clean pull zone then 2 spacing above and below Inside Rack Depth: 24 (1) Fat/Skinny Pullup Bar - 1.25 and 2 Pull-up bar at 7 6 Height (Shorty version is 7') (2) Infinity J-Cups, (2) Pin/Pipe Safeties, (4) Band Pegs Black Powder Coat Finish Overall Size: 53"x34" ROGUE R-3 POWER RACK or Equal, 1, EA; LI 027: GH-1 Glute Ham Developer Updated Bolt-Together Construction with Triangular Base 2x3 and 2x2 11-gauge steel Includes Foam Roller Foot Pad Ankle roller pad design with heavy duty moisture wicking upholstery 1 adjustable increments on the foot pads Protective Rubber Feet Holes for band pegs Oversized laser cut 3/16 steel foot plate 1/2" and 3/8 Hardware Total foot print: 68-1/2" x 45 Color: Black ROGUE GH-1 GLUTE HAM DEVELOPER or Equal, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an all-or-nothing basis. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf "AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures." "52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. Please address your questions through the FedBid buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/22d0799d47acbaf8a4b4164b677b654a)
- Place of Performance
- Address: Fort Stewart, GA 31314
- Zip Code: 31314
- Zip Code: 31314
- Record
- SN04852098-W 20180315/180313230946-22d0799d47acbaf8a4b4164b677b654a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |