SOURCES SOUGHT
54 -- Rapid In-theatre Deployment (RAID 7H) - Market Survey RAID 7H
- Notice Date
- 3/2/2018
- Notice Type
- Sources Sought
- NAICS
- 332618
— Other Fabricated Wire Product Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Construction & Equipment, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- 5450-99-821-3761
- Archive Date
- 4/17/2018
- Point of Contact
- Vincent Catanzaro, Phone: 2157375228, Vincent Oliva, Phone: 215.737.3334
- E-Mail Address
-
vincent.catanzaro@dla.mil, Vincent.Oliva@dla.mil
(vincent.catanzaro@dla.mil, Vincent.Oliva@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- Market Survey RAID 7H DLA Troop Support is seeking industry feedback from interested parties concerning the manufacturing of the Rapid In-theatre Deployment (RAID 7H) NSN 5450-99-821-3761. The RAID 7H is a patented storage and release container which was developed to reduce the logistical burden of supporting force protection missions on expeditionary operations, such as the construction of forward operating and patrol bases. The RAID 7H utilizes a specially designed and engineered ISO container that conforms to all ISO stacking and transportation standards and this patented configuration has the potential to remove 50% of all road traffic involved in delivering defensive barriers to the end-user. With a purposely designed release mechanism to allow the rapid deployment of pre-joined standard or recoverable MIL units, RAID 7H enables curves and corners to be easily formed. Some or all of the contents of the container can be dispensed with one continuous stream. The RAID 7H system was developed to deploy over a 1000 feet of MIL 7 in under 60 seconds. Additional units can be joined to create vast boundary walls or perimeters with entry control points. Besides the OEM, there is no known alternate source that has the capability to produce the RAID 7H system. Hesco Bastion LTD developed this item and owns the complete technical data rights. This information is proprietary and the Government does not possess the detailed technical documentation that describes all required form, fit, and function characteristics of this item. NSN 5450-99-821-3761 REVETMENT, PREFABRICATED U09A4 HESCO BASTION LTD P/N "RAID 7H" RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES (End of STO) SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •,,All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951. •,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack. •,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951. Suppliers capable of furnishing these items must so indicate by email at vincent.catanzaro@dla.mil or in writing to: DLA Troop Support ATTN: FCF- Vincent Catanzaro 700 Robbins Avenue Building 3-D Philadelphia, PA 19111 The contractor will be required to manufacture these items and satisfy the Government's delivery requirements. Responses to this survey must include documentation citing the following: -Contractor's experience demonstrating the capability to meet the Government's requirements in producing products that meet all performance requirements, and that are physically and functionally interchangeable with presently identified item. -Quality Standard (Government or Industry) that shall be in place for this effort. -Past Performance for the same or similar items. The contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same or similar items for which they have production experience. Government contract numbers, if applicable, shall be provided. -The contractor must provide information to show it possesses, or shall possess, adequate production plant facilities (equipment, tooling, and space) to enable it, or its subcontractors, to meet production delivery requirements for these items.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-I/5450-99-821-3761/listing.html)
- Record
- SN04841135-W 20180304/180302231317-02d9328ccc9468ab477f91dfde8ca515 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |