SOURCES SOUGHT
30 -- ACTUATOR, ELECTRO-ME - DLA MARKET SURVEY
- Notice Date
- 2/26/2018
- Notice Type
- Sources Sought
- NAICS
- 333612
— Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7L318R0084SS
- Archive Date
- 3/20/2018
- Point of Contact
- Sheri L. Race, Phone: 6146922419
- E-Mail Address
-
Sheri.Race@dla.mil
(Sheri.Race@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- DLA MARKET SURVEY ACTUATOR,ELECTRO-ME RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY. THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS: https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25. QUALITY ASSURANCE PROVISION THE ITEM DESCRIBED IN THIS SOLICITATION IS DEFINED IN WHOLE OR IN PART BY ARMY DRAWING(S). THESE DRAWING(S) MAY CONTAIN A PAINT FINISHING REQUIREMENT. WHERE SUCH REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING 16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE- MENTS OF THE ARMY DRAWING(S). THIS DRAWING CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT RESISTANT COATINGS (CARC), AND ADDITIONAL INFORMATION RELATING TO HIGH TEMPERATURE COATINGS. CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19200 12285327 REVISION NR L DTD 10/13/2009 PART PIECE NUMBER: 12285327-1 IAW REFERENCE DRAWING NR 19207 12387272 REVISION NR B DTD 08/09/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285342 REVISION NR F DTD 04/23/1996 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12273868 REVISION NR C DTD 03/26/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285325 REVISION NR C DTD 09/13/2006 PART PIECE NUMBER: IAW REFERENCE QAP 19200 12285327 REVISION NR H DTD 07/30/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285328 REVISION NR G DTD 11/02/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12548959 REVISION NR DTD 08/15/1986 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387279 REVISION NR A DTD 01/27/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12273554 REVISION NR J DTD 05/13/1992 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12273868 REVISION NR D DTD 02/24/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12274066 REVISION NR D DTD 08/07/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12274263 REVISION NR H DTD 04/27/1993 PART PIECE NUMBER: IAW REFERENCE QAP 19200 12285327 REVISION NR J DTD 02/23/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285341 REVISION NR E DTD 05/11/1992 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12285341 REVISION NR D DTD 05/06/1992 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12273868 REVISION NR D DTD 02/24/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11655194 REVISION NR J DTD 09/04/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387301 REVISION NR A DTD 12/13/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387152 REVISION NR D DTD 10/05/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387301 REVISION NR DTD 02/26/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12273868 REVISION NR D DTD 02/24/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 16236 CS-2300-0001 REVISION NR B DTD 07/22/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344343 REVISION NR M DTD 02/26/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387305 REVISION NR DTD 01/27/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285320 REVISION NR AK DTD 08/16/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12285327-1 REVISION NR DTD 10/09/2003 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285326 REVISION NR E DTD 04/06/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285328 REVISION NR J DTD 04/10/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285327-1 REVISION NR DTD 11/08/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387305 REVISION NR DTD 04/27/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11655194 REVISION NR K DTD 03/01/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344343 REVISION NR M DTD 02/26/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12285327 REVISION NR E DTD 07/30/1992 PART PIECE NUMBER:
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7L318R0084SS/listing.html)
- Record
- SN04835346-W 20180228/180226231716-30ed1212452b18100812d50aa7e28973 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |