SOURCES SOUGHT
66 -- ANSYS Q3D Extractor License and Technical Support
- Notice Date
- 2/16/2018
- Notice Type
- Sources Sought
- NAICS
- 511210
— Software Publishers
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), NIST AMD Boulder, 325 Broadway, Boulder, Colorado, 80305, United States
- ZIP Code
- 80305
- Solicitation Number
- NB672010-18-00032
- Archive Date
- 3/7/2018
- Point of Contact
- Michael G. Fredericks, Phone: 3034977763, Aron R. Krischel, Phone: 303-497-3032
- E-Mail Address
-
michael.fredericks@nist.gov, aron.krischel@nist.gov
(michael.fredericks@nist.gov, aron.krischel@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- National Institute of Standards and Technology (NIST) Acquisition Management Division, Boulder, CO Sources Sought for Commercial Item Purchase - ANSYS Q3D Extractor License and Technical Support The National Institute of Standards and Technology (NIST) Communications Technology Laboratory (CTL) has several programs that rely on the ANSYS Q3D Extractor software as an integral step in data analysis procedures. Objective Bring the ANSYS Q3D Extractor software license current and acquire the technical support necessary to maintain and upgrade the software for a period not less than five (5) years. The part number for the ANSYS Q3D Extractor software license is LIC0005051. Scope Task 1: CTL's license expired close-of-business 30 September 2017. The Contractor shall bring CTL's ANSYS Q3D Extractor software license current to the following time frame: Date of Award of the base year contract to 30 Sep 2018. This includes all maintenance and software upgrades. Task 2: The Contractor shall provide the ANSYS Q3D Extractor software license with ANSYS Q3D Extractor software maintenance and appropriate software upgrades in accordance with the Period of Performance noted below. Task 3: The Contractor shall deliver the ANSYS Q3D Extractor software license in accordance with the Delivery Schedule below. Delivery Schedule The Contractor shall deliver the ANSYS Q3D Extractor software license and renewal as follows: Base Order: Within five (5) business days after receipt of the order. Options: Within five (5) business days after receipt of the order option. Email delivery of license and its renewal to the Point of Contact is authorized. Place of Performance Contractor performance shall be accomplished electronically (i.e., email, internet, phone). Period of Performance The Contractor shall provide ANSYS Q3D Extractor software license, maintenance and upgrades as follows: Base Period:Effective date of Base Order - to 30 Sept 2018 Option Period 1:1 Oct 2018 to 30 Sept 2019 Option Period 2:1 Oct 2019 to 30 Sept 2020 Option Period 3:1 Oct 2020 to 30 Sept 2021 Option Period 4:1 Oct 2021 to 30 Sept 2022 This announcement is not a Request for Proposals (RFP) and does not commit the Government to award a contract now or in the future. No solicitation is available at this time. The purpose of this synopsis is to identify small businesses with the requisite qualifications to meet the requirements of the item stated herein. After results of this market research are obtained and analyzed and compared with NIST's minimum requirement (see Technical Specifications above), NIST may conduct a small business set-aside competitive procurement and subsequently award a contract. If at least two qualified small businesses are identified during this market research stage, then this acquisition will be solicited as a small business set aside. NIST is seeking responses from all responsible small business sources (SB, SDB, WOSB, HUBZone, SDVOSB and VOSB). This requirement is assigned a NAICS code of 511210 Software Publishers. The specific purpose of this Sources Sought Announcement is to determine if there are small businesses, within the parameters identified above, that can provide the product identified. Interested small business organizations that believe they can meet the requirement should submit electronic copies of their capability statement. Please limit responses to three (3) pages or less. Responses should include the following information: 1. Name of company that will provide product. 2. Name of company that will manufacture the product. 3. Spec sheets and examples of products that meet the specifications. 4. Typical lead time to deliver the product after receipt of order. 5. Any other relevant information that is not listed above which the Government should consider in developing our minimum specifications and finalizing our market research. Any proprietary information should be clearly marked. The written capability statement should be received by the Contract Specialist no later than 2:00 pm MST February 20, 2018. The capability statement shall identify the business status of the organization. Only electronic statements will be accepted. Faxes will not be accepted. Send emails and any inquiries to Michael Fredericks, Contracting Officer, at michael.fredericks@nist.gov. Place of Contract Performance: Contractor's facility
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/56a3611832afbf15e0b45568d9182535)
- Place of Performance
- Address: NIST, 325 Broadway, Boulder, Colorado, 80305, United States
- Zip Code: 80305
- Record
- SN04826452-W 20180218/180216230944-56a3611832afbf15e0b45568d9182535 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |