DOCUMENT
79 -- Tennant T500 brand-name or equal Orbital Floor Scrubber - Attachment
- Notice Date
- 1/23/2018
- Notice Type
- Attachment
- NAICS
- 333318
— Other Commercial and Service Industry Machinery Manufacturing
- Contracting Office
- Department of Veterans Affairs;NETWORK 23 CONTRACTING OFFICE;1303 5th St, Suite 300;Coralville IA 52241
- ZIP Code
- 52241
- Solicitation Number
- 36C26318Q0273
- Response Due
- 1/29/2018
- Archive Date
- 2/28/2018
- Point of Contact
- William E Jefferson
- E-Mail Address
-
8.3613<br
- Small Business Set-Aside
- N/A
- Description
- This is a Request for Information (RFI) only; it is not a request for quotations or offers. 52.215-3 -- Request for Information or Solicitation for Planning Purposes (Oct 1997) (a) The Government does not intend to award a contract on the basis of this solicitation or to otherwise pay for the information solicited except as an allowable cost under other contracts as provided in subsection 31.205-18, Bid and proposal costs, of the Federal Acquisition Regulation. (b) Although proposal and offeror are used in this Request for Information, your response will be treated as information only. It shall not be used as a proposal. (c) This sources sought is issued for the purpose of conducting market research to identify qualified and responsible Veteran Owned Small Business (VOSB) and Service Disabled Veteran Owned Small Business (SDVOSB) sources for a brand-name or equal Tennant T500 orbital floor scrubber. (d) Responsible and qualified sources are being sought to fulfill a potential need for a Tennant 500 brand-name or equal orbital floor scrubber for the Des Moines Veterans Affairs Medical Center (VAMC). See the below listed salient characteristics. Salient Characteristics: Commercial/Industrial grade. Machine Type: Walk-Behind Main Down Pressure: Low: 105-112 lbs. High: 168 172 lbs. Sound level/Quiet mode: 65-67 db / 60-62 db. Charger type: On-board, Off-board. Estimated Run Time: Up to 5.9 hours. Power Source: AGM Gel Battery Head Type: Orbital Scrubbing speed: 2.2 2.4 mph Scrub Motor: 24 VDC, 0.75 hp / 0.55 kW Brush Pad RPM: 2000 2300 RPM Solution tank capacity: 20 23 gal Recovery tank capacity: 26 - 28 gal. Cleaning path/Head: 26 - 28 inch. Squeegee width: 37 40 in. Water lift: 32 - 35 in. Optional use of detergent-free orbital scrub head for chemical-free floor finish removal. Improved operator ergonomics through controls that put the propel switch and speed setting within easy reach of operator. Integrated squeegee and p-trap designed for water pick up that prevents water drips on floor surface after cleaning. OEM Warranty Period must meet or exceed the below specifications: 10 Year on Rotationally-Molded Components. 36 Months on Parts. 12 Months Battery. 24 Months on Labor. 6 Months on Travel. 2,000 on Hourmeter. ORIGINAL EQUIPMENT MANUFACTURER (OEM) The Vendor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system such that the OEM warranty and service are provided and maintained by the OEM. All warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions. The vendor shall provide new items ONLY; no remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. All standard training material, software, start-up guides and packaging will be included as sold, shipped and distributed by the OEM. Brand-name items are to be delivered as specified and allowed with the original manufacturers distribution agreements. This agreement only includes commercial items. Products that are not commercial items are considered experimental and purchase of experimental products shall not be authorized under this agreement. All interested parties should respond with the following information, in writing, to the Contract Specialist listed below. 1) Company/individual name 2) Address 3) Point of contact with phone number and e-mail address 4) Company Socio-Economic Status (example large, small, SDVOSB, VOSB, WOSB etc.) 5) Information describing your interest, 6) Indicate FSS/GSA contract number, if applicable 7) Tax ID number 8) DUNS number 9) NAICS code (if different than below) 10) Capabilities statement If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov). The NAICS 333318 is applicable to this acquisition; with a size standard of 1,000 employees. Any questions should be addressed to the Contract Specialist, in writing, at the email address provided. Because this is a request for information only, answers to questions will not be posted. If your organization has the capability to provide these items and is interested in this opportunity, please respond to William Jefferson, Contract Specialist, Network 23 Contracting Office (NCO23), via e-mail at William.Jefferson4@va.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/ICVAMC584/ICVAMC584/36C26318Q0273/listing.html)
- Document(s)
- Attachment
- File Name: 36C26318Q0273 36C26318Q0273.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4035427&FileName=36C26318Q0273-000.docx)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4035427&FileName=36C26318Q0273-000.docx
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: 36C26318Q0273 36C26318Q0273.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4035427&FileName=36C26318Q0273-000.docx)
- Record
- SN04797129-W 20180125/180123231354-a51091849c1d680074e8b2ad1c72e188 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |