Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 11, 2018 FBO #5893
DOCUMENT

56 -- Facility Wallcovering - Phoenix VA Medical Center Vinyl, Low VOC 3345 Lineal Yards - Attachment

Notice Date

1/9/2018
 

Notice Type

Attachment
 

NAICS

238320 — Painting and Wall Covering Contractors
 

Contracting Office

Department of Veterans Affairs;VISN/18PHX;777 E. Missouri, Suite 300;Phoenix AZ 85014
 

ZIP Code

85014
 

Solicitation Number

9117
 

Response Due

1/16/2018
 

Archive Date

2/15/2018
 

Point of Contact

Johanne Gingras
 

E-Mail Address

e.gingras@va.gov<br
 

Small Business Set-Aside

N/A
 

Description

STATEMENT OF WORK Wallcovering PVAHCS MAIN FACILITY Phoenix VA Health Care System 650 East Indian School Road Phoenix, AZ 85012 STATEMENT OF SERVICES This project involves the procurement of wallcovering for the main facility at the Phoenix VA Health Care System (PHOVAHCS). This is part of the Halls and Walls program to update and replace damaged/unserviceable finishes to conform to facility standards. This procurement package is to Match Existing to Maintain Facility Finish Standards PROJECT OVERVIEW Installation will be conducted by VA personnel. Manufacturing requirements: The manufacturer shall be expected to provide commercial grade wallcovering to meet the design intent and warranty requirements shown in the attached specifications sheets. GENERAL INFORMATION The Certification and Accreditation requirements do not apply and a Security Accreditation Package is not required and there is no sensitive information to protect. This specification establishes the minimum requirements for the acquisition of a complete and usable selection of wallcovering. All products and components will be new; refurbished products will not be accepted. All products will be commercial grade for healthcare and commercial use. Substitutions of the finishes and fabrics shown in the product pages shall NOT be accepted. Pricing shall include these exact finishes and colors as chosen by the VA Interior Designer/COR. Contractor shall coordinate delivery with the interior designer/COR/designated representative. PRODUCT AND VENDOR DATA Include with Submittal documents (in paper and PDF format as indicated in Submissions Section above): Provide detailed CAP worksheet indicating parts and finishes. Include part number, and quantities, price each and extended price for each line. All applicable warranties. Estimated delivery times, with concurrence of the VA designer s specific timeline intervals as acceptance of said detailed delivery method. Agreement to notify interior designer/COR prior to shipping for estimated time of arrival. Delivery method: Trucks direct to warehouse, unpackaged. DO NOT SUBMIT: Technical specification books Company brochures DELIVERY, STORAGE AND HANDLING All products shall be delivered to the warehouse. Storage of product prior to delivery is vendor s responsibility. There shall not be a staging area provided at the project site. Product is manufacturer s responsibility until the Phoenix VA Interior Designer accepts complete delivery. WARRANTY WARRANTY INFORMATION provided needs to indicate the length, what is covered, if labor services are covered, and the usage that warranty covers (24/7 or 8 hour work day, etc.) THE VENDOR/MANUFACTURER SHALL PROVIDE WARRANTIES as indicated below: Warranties for wall-covering will meet or exceeds Koroseal warranties. Warranties shall be signed by the authorized representative of the manufacturer. Warranties accompanied by document authenticating the signer as an authorized representative of the guarantor, shall be presented to the owner upon the completion of the project. The vendor shall guarantee that the wall covering products are free from any defects in material and workmanship from the date of delivery. SCHEDULE DELIVERY Coordinate delivery of items with the Phoenix VA Interior Designer, all items must be delivered within 1 Year of order. INSTALLATION Installation will be conducted by VA personnel. PRODUCT SPECIFICATIONS DN-VS3-25, DN, DE NOVO, VENUE SERIES III, DNVS325, 3345, LY Vinyl Low VOC, Type II/Class A, CCC-W-408A, WA-101 52/54 Width Random match, reverse Tested in accordance with ASTM E-84 Tunnel Test Flame Spread 15 Smoke Developed 20/Class A USGBC LEED Meets California 01350 IAQ test requirements for wallcovering Contribute to LEED ® EQ 4.1 point for low-emitting materials, adhesives, and sealants, if used with low VOC adhesives NSF/ANSI 342 ANTI-MICROBIAL FEATURES: This product is intended for use in buildings that are properly designed and maintained to avoid moisture infiltration, condensation and/or accumulation at wall cavities and wall surfaces, particularly in warm, humid climates. BREATHE FREETM MICRO-VENTING AVAILABLE UPON REQUEST: Breathe FreeTM Micro-vented wallcovering from Colour & Design can be used to help control un-wanted moisture inside a building envelope. 5 year warranty against manufacturing defects. Easily conforms to gentle curves and irregular surfaces Osnaburg backing ~~~~~~~~~~END - PRODUCT SPECIFICATIONS~~~~~~~~~~
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PhVAMC/HMC/9117/listing.html)
 

Document(s)

Attachment
 

File Name: 9117 9117.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4007965&FileName=9117-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4007965&FileName=9117-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Carl T. Hayden VAMC;Engineering;650 E Indian School Rd;Phoenix, AZ

Zip Code: 85012
 

Record

SN04784530-W 20180111/180109230929-ea2cc77a50585c1df58912211f6f9a97 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |