SOURCES SOUGHT
34 -- 5 Axis Milling Machine - Market Survey
- Notice Date
- 11/1/2017
- Notice Type
- Sources Sought
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - WRN (W56HZV)(DTA), 6501 EAST 11 MILE ROAD, Warren, Michigan, 48397-5000, United States
- ZIP Code
- 48397-5000
- Solicitation Number
- W911PT-18-R-0002
- Point of Contact
- Patrick D. Brown, Phone: 5862823545, REY MONCAYO, Phone: 586-282-7080
- E-Mail Address
-
patrick.d.brown33.civ@mail.mil, REYMUNDO.MONCAYO.CIV@MAIL.MIL
(patrick.d.brown33.civ@mail.mil, REYMUNDO.MONCAYO.CIV@MAIL.MIL)
- Small Business Set-Aside
- N/A
- Description
- Specification for 5 Axis Milling Machine Market Survey for the procurement of 5 Axis Milling Machines GENERAL INFORMATION: The U.S. Government appreciates the time and effort taken to respond to this survey. The U.S. Government acknowledges its obligations under 18 U.S.C. §1905 to protect information qualifying as "CONFIDENTIAL" under this statute. Pursuant to this statute, the U.S. Government is willing to accept any trade secret or confidential restrictions placed on qualifying data forwarded in response to the survey questions and to protect it from unauthorized disclosure subject to the following: 1. Clearly and conspicuously mark qualifying data as trade secret or confidential with the restrictive legend (all caps) "CONFIDENTIAL" with any explanatory text, so that the U.S. Government is clearly notified of what data needs to be appropriately protected. 2. In marking such data, please take care to mark only those portions of the data or materials that are truly trade secret or confidential (over breadth in marking inappropriate data as "CONFIDENTIAL" may diminish or eliminate the usefulness of your response - see item 6 below). Use circling, underscoring, highlighting or any other appropriate means to indicate those portions of a single page which are to be protected. 3. The U.S. Government is not obligated to protect unmarked data. Additionally, marked data that is already in the public domain or in the possession of the U.S. Government or third parties, or is afterward placed into the public domain by the owner or another party through no fault of the U.S. Government will not be protected once in the public domain. Data already in the possession of the U.S. Government will be protected in accordance with the U.S. Government's rights in the data. 4. Confidential data transmitted electronically, whether by physical media or not, whether by the respondent or by the U.S. Government, shall contain any restrictive legend, with any explanatory text, on both the cover of the transmittal e-mail and at the beginning of the file itself. Where appropriate for portions only of an electronic file, use the restrictive legends "CONFIDENTIAL DATA BEGINS:" and "CONFIDENTIAL PORTION ENDS." 5. In any reproductions of technical data or any portions thereof subject to asserted restrictions, the U.S. Government shall also reproduce the asserted restriction legend and any explanatory text. 6. The U.S. Government sometimes uses support contractors in evaluating responses. Consequently, responses that contain confidential information may receive only limited or no consideration since the Respondent's marking of data as "Confidential" will preclude disclosure of same outside the U.S. Government and therefore will preclude disclosure to these support contractors assisting the evaluation effort. DESCRIPTION OF INTENT: THIS IS A MARKET SURVEY REQUESTING INFORMATION IN SUPPORT OF THE FOLLOWING PERFORMANCE REQUIREMENT. No contract will be awarded from this announcement. This is not a Request for Proposal (RFP) or an announcement of a forthcoming solicitation. Also, it is not a request seeking contractors interested in being placed on a solicitation mailing list. Response to this questionnaire is voluntary and no reimbursement will be made for any costs associated with providing information in response to this market survey and any follow-on information requests. Data submitted in response to this market survey will not be returned. No solicitation document exists at this time, and calls requesting a solicitation will not be answered. PERFORMANCE REQUIREMENT: The purpose of this questionnaire is to obtain information on commercial industry capability to satisfy U.S. Army requirements for 5 Axis Milling Machines. The machinery requirements shall be in accordance with Specification 20-17-3417, found in Attachment 0001. The specification defines the requirements for a New 5-Axis Milling machine. The machine shall come equipped with a 2 station automatic pallet changer. The machine shall have both turning and grinding capabilities. This shall be a complete turn-key project with the contractor providing all options, accessories, and other equipment as described in the specification. INSTRUCTIONS FOR COMPLETING THE QUESTIONNAIRE: 1. Number each response with the appropriate question number. 2. You do not have to repeat the question in your response. 3. If you cannot answer a question, please indicate "No Response." 4. If a response will satisfy another question, state: "See response to question XXX." 5. Include relevant sales media and product manuals. If providing an ACROBAT formatted manual, annotate the manual to indicate which material is applicable to the questions. If preferred, include Internet Web links to locations where animations/videos may be viewed. 6. If your sales media and/or manuals contain a restricted distribution statement, issue a release statement indicating that the restricted material may be distributed to Army personnel involved with this Market Survey. 7. Spell out any acronyms in their first instance. 8. Clearly mark any proprietary information. If applicable, the front page of your response package should state: "Proprietary Information Contained." Provide a release statement indicating that the proprietary information may be distributed to Army personnel involved with this Market Survey. Request for Information (RFI) - Questionnaire 1. Company Name: 2. Are you a large or small business for North American Industry Classification System? If small business, are you: Small Disadvantaged - or - 8(a) In a Hubzone Service-Disabled Veteran-Owned Women Owned 3. Mailing Address: 4. E-Mail Address: 5. Point of Contact (POC)/Title: 6. Telephone No: 7. Fax No: 8. How long has your company been in business and what is you experience in providing 5 axis milling machines to the commercial market? 9. Is your company currently capable of manufacturing 5 axis milling machines? If not, do you have any plans to develop this capability in the future? If so, when would these machines begin production? 10. Are you able to meet all of the Requirements listed in Specification 20-17-3417? If not, please list which areas you are unable to meet. 11. If you are a small business with 5 axis milling machine manufacturing capability, do you manufacture at least 51% of the end product? 12. Have you provided 5 axis milling machines for any U.S. Government agency in the past? If so, which agency? 13. If you are capable of producing 5 axis milling machines, what is the expected lead time for delivery of 6 machines from the date of contract award? 14. In order to fulfill contract requirements, would you have to increase your workforce or facilities? 15. If you were awarded a contract for the 5 axis milling machines, where would production take place? 16. Any other pertinent information you care to enclose? Responses to this market investigation questionnaire should be sent via e-mail to Pat Brown - Patrick.d.brown33.civ@mail.mil. You are requested to put "5 AXIS MILLING MACHINE MARKET SURVEY RESPONSE" in the subject line of the e-mail. You may respond in total or to any part of this questionnaire, however response is mandatory for questions 1 and 2. Any requests for clarifications of this Survey shall also be addressed to Pat Brown, and will be published with the appropriate answers at the same web location as this Questionnaire. Any product literature that cannot be e-mailed may be sent to: U.S. Army Contracting Command - Warren CCTA-HDT-B ATTN: Pat Brown, Mail Stop 350 6501 E. Eleven Mile Rd. Warren, MI 48397-5000 Replies to this questionnaire must be received by close of business, 17 November 2017. Please mark your information "Proprietary", as you believe appropriate. Your input is voluntary and no compensation will be made for your participation in this survey. We appreciate your cooperation in answering these questions and thank you in advance for your participation.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/3f0c1ed7931566bcf79ee45b9fc6173d)
- Place of Performance
- Address: Watervliet Arsenal (WVA), Watervliet, New York, United States
- Record
- SN04728877-W 20171103/171101231112-3f0c1ed7931566bcf79ee45b9fc6173d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |