SOLICITATION NOTICE
58 -- AASF1 Repeater Comp - AAFS1 Repeater Components
- Notice Date
- 9/14/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334220
— Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
- Contracting Office
- Department of the Army, National Guard Bureau, USPFO for Pennsylvania, Department of Veteran & Military Affairs, Annville, Pennsylvania, 17003-5003
- ZIP Code
- 17003-5003
- Solicitation Number
- W912KC-17-T-0004
- Archive Date
- 10/7/2017
- Point of Contact
- Raymond C Folweiler, Phone: 7178616872
- E-Mail Address
-
raymond.c.folweiler.mil@mail.mil
(raymond.c.folweiler.mil@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Attachment 1 Company Information Sheet Combined Synopsis Solicitation Repeater Components SOW Repeater Components The Pennsylvania Army National Guard (PAARNG) ARMY AVIATION SUPPORT FACILITY #1(AASF1)-Fort Indiantown Gap, PA has a requirement for components needed to make the FM repeater, usable for aircraft transitioning to and through the Northern Training Area, specifically 30-90MHz Power Amplifier, Integrated Power Supply for the URC-200 radio, a Retransmit Cable designed to work between two URC-200 radios, and an Antenna station designed to be tuned with the Power Amplifier and URC-200 radio. (See Statement of Work) 1EACH Amplifier Specifically need one amplifier that can take the power output of the URC-200 (V2) and amplify that to 50 Watts of Maximum power. This amplifier must be compatible with the 30-90 MHz radio frequencies. This amplifier will also need to have a power cable to power the amplifier and will need an input cable to hook up to the radio system. Amplifier Specification: Frequency Range: 30 MHz to 87.975 MHz Power Output: 50W +/- 1 dB Input RF Power: 2W to 5W, 2W provides 50W output Primary Power: 28 Vdc at 7A Harmonic Suppression: -55 dB typical, 50 dB minimum Output Protection: Open and short circuit protection at antenna terminal Connectors: Input RF - BNC; 2W to 5W, Output RF - BNC; 50W, Input DC power - Front Panel 92-pin) or rear of case (3-pin) 2 EACH AC Power Supplies Power supplies that must be able to provide AC power to the URC-200 (V2). These power supplies will need to have a compatible cable that can be hooked directly into the URC-200 radio to provide power to the system. These power supplies will also need to have the proper cables and plugs so that they can be plugged into a commercial power supply. Power Supply Specification: AC Input Range: 90 to 254 VAC 47 - 63 Hz Output Voltage: +28 VDC +/- 1V Output Current: 14 Amps Output Duty Cycle: -10°C to +35° C - Continuous +35°C to +55° C - 1 minute @ 13 amps 6 minutes @ 0.5 amps 1EACH Retransmit Cable Needed are one cable that must be at least 4 foot long and has the connections to be able to hook up to two URC-200 (V2) Transceivers simultaneously. This cable allows for one URC-200 to take a received transmission, and then send that message through to the other URC-200 where it will be retransmitted. These are Unique to the URC-200 Radio/Transmitter to allow for retransmission of radio signals from one URC-200 Radio/Transmitter to the other. This cable must be compatible with URC-200 radio. Retransmit Cable Specification: Length: minimum 4 feet and maximum of 55 feet Compatibility: Must be compatible to connect 2 URC-200 (V2) radios and allow them to retransmit each other 2EACH Antenna base station system Need two antenna base stations that are compatible with the URC-200 (V2) radio system and have the ability to receive and transmit the 30-90 MHz frequencies. These base station will placed at approximate heights of 50 feet and 150 feet above the ground. The Antenna base station systems must be compatible with the URC-200 radio system and also with the above requested Amplifier. Unique to the URC-200 Radio/Transmitter to allow for retransmission of radio signals from one URC-200 Radio/Transmitter to the other. This cable must be compatible with URC-200 radio. Antenna Specification: Frequency Range: 30 MHz to 87.975 MHz Power Output: 50W +/- 1 dB Input RF Power: 2W to 5W, 2W provides 50W output Primary Power: 28 Vdc at 7A Harmonic Suppression: -55 dB typical, 50 dB minimum Output Protection: Open and short circuit protection at antenna terminal Connectors: Input RF - BNC; 2W to 5W, Output RF - BNC; 50W, Input DC power - Front Panel 92-pin) or rear of case (3-pin) OVERALL EQUIPMENT SPECIFICATION: Operating Temperature -40°C +60° C Military Standard: MIL-STD-810C, MIL-STD-810D, MIL-STD-810E, MIL-STD-810F, MIL-STD-810G Detailed Vendor Requirements: *GSA vendor / ability to order repair parts and accessories as needed. *Standard two year warranty on component and parts. *Must all be compatible (where applicable) to the URC-200 (V2) with the 30-90 MHz option installed. WILL ACCEPT BRAND NAME EQUAL OR BETTER SUPPLY. If the offeror is offering a Brand name or equal supply then FAR provision 52.211-6 applies. The Contracting Officer will evaluate equal products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. Brand name equal products must, at a minimum, meet or exceed all of the following salient characteristics as the requested equipment: See Statement of Work The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34.52.204-18, 52.209-10, 52.211-6, 52.219-7, 52.222-50, 52.223-18, 52.232-33, 52.232-39, 52.233-3,52.233-4,52.222-3, 52.222-19 The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. DFARS Clauses 252.203-7000,252.232-7010,252.232-7003,252.204-7012,252.204-7004,252.209-7991,252.225-7001,252.203-7999, 252.225-7035ALT I,252.209-7999 52.247-48 POC LTC Raymond C. Folweiler IV email raymond.c.folweiler.mil@mail.mil Questions must be submitted NL 22SEP17 1100 AM EST Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA36/W912KC-17-T-0004/listing.html)
- Place of Performance
- Address: BUILDING / FACILITY, Army Aviation Support Facility #1-PA, Building 19-101, Fort Indiantown Gap, Annville, PA 17003, Annville, Pennsylvania, 17003, United States
- Zip Code: 17003
- Zip Code: 17003
- Record
- SN04679044-W 20170916/170914233233-5773ac0f8bdc6a2bd564de1676748c8b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |