SOLICITATION NOTICE
35 -- 20x40 Surface Grinder
- Notice Date
- 9/7/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- Department of the Army, National Guard Bureau, USPFO for Mississippi, 144 Military Drive, JACKSON, Mississippi, 39208-8860
- ZIP Code
- 39208-8860
- Solicitation Number
- W9127Q-17-T-0053
- Archive Date
- 9/28/2017
- Point of Contact
- Robert Mayhue, Phone: 6013131700
- E-Mail Address
-
robert.w.mayhue2.mil@mail.mil
(robert.w.mayhue2.mil@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The Mississippi National Guard 1108th TASMG is requesting a 20x40 Surface Grinder. This is being conducted under simplified acquisition procedures. The intended procurement will be under the NAICS code 333517 with a small business size standard of 5 00 employees. All requests for information shall be emailed to the contracting specialist listed herein: robert.w.mayhue2. mil@mail.mil This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation No. W9127Q-17-T-0053 applies and is issued as a Request for Quotation. This document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-68. This acquisition is set aside for small business. This announcement is the solicitation which will result in a firm fixed price contract. Award can only be made to those offerors that hold an active registration through the System for Award Management (SAMs). For those that are not registered, you may log onto the internet at www.sam.gov. Quotes are due no later than 3:00 p.m. CST, 13 September 2017. Questions regarding contractual documents may be addressed to MAJ Robert Mayhue, Contract Specialist at (601) 313-1700 or E-mail robert.w.mayhue2.mil@mail.mil All questions must be received by 12:00 p.m. on 12 September 2017. The following FAR provisions apply: FAR 52-212-1, Instructions to Offerors (Oct 2001); FAR 52.212-2, Evaluation- Commercial Items. Evaluation criteria will be based on best value; LPTA- Lowest Price Technically Acceptable. FAR 52.212-3, Offeror Representations and Certifications - Commercial Items (May 2001), FAR 52-212-4, Contract Terms and Conditions-Commercial Items; FAR 52.212-5, Contract Terms and Conditions - Required to Implement Statutes or Executive Orders, (May 2001), Applicable FAR Clauses cited within 52.212-5 are as follows: 52.203-6 Alt. 1, Restrictions on Subcontractor Sales to the Government; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.219-6, Notice of Small Business Set-Aside; 52.219-28, Post- Award Small Business Program Representation; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-50, Combating Trafficking in Persons; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration; 52.233-3, Protest After Award; 52.233-4, Applicable Law for Breach of Contract Claim; 52.222-3, Convict Labor; 52.222-19, Child Labor- Cooperation with Authorities and Remedies; 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; 52.222-36, Affirmative Action for Workers with Disabilities,; Full text of these provisions may be accessed on-line at http://www.arnet.gov or http://farsite.hill.af.mil. Please be sure to include TIN, DUNS, and Cage Code within quote. SPECIFICATIONS FOR GRINDER ARE AS FOLLOWS: 1108 th TASMG MACHINE SHOP PRECISION SURFACE GRINDER REQUIREMENTS AND TECHNICAL DATA •- 20" x 40" table working area •- 22" x 45" maximum travels •- 7.5HP spindle motor •- Hydraulic table feed with V and flat turcite ways •- Electronic control traveling column cross feed •- Automatic incremental down feed with counter and spark out cycles •- Automatic lubrication •- Full length rear splashguard •- 20 x 40 electromagnetic chuck and variable holding power control •- Paper filter coolant system with automatic paper advance •- Overhead parallel dresser •- Spindles with run out less than 0.0001" •- Wheel balancing base and arbor, grinding wheel and flange, table dresser, halogen light, low volt controls, tool box and tools ALSO Maximum distance spindle CL to table: 23.6" Longitudinal table speed ft/min: 23-82 Automatic cross feed / stroke: 0.02" - 0.4" Cross-feed handle graduations: 0.001" Cross feed travel per revolution of hand wheel: 0.2" Rapid cross feed "/min: 51 Spindle speed: 1,740 Wheel dimension: 14"OD, 1.5"T, 5"ID Automatic down feed increments: 0.0002" - 0.0016" Down feed handle graduations: 0.0001" Down feed travel per revolution of hand wheel: 0.02" Rapid vertical travel "/min: 11 Hydraulic pump motor HP: 3 Table load including chuck: 2,200 lbs Net weight: 12,700 lbs. TO BE SHIPPED TO: Hangar One Hewes Avenue Gulfport, MS 39505
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA22/W9127Q-17-T-0053/listing.html)
- Place of Performance
- Address: MSARNG TASMG, Hangar One, Hewes Avenue, Gulfport, Mississippi, 39505, United States
- Zip Code: 39505
- Zip Code: 39505
- Record
- SN04666368-W 20170909/170907232518-2d89d19cf85b8c38a07b12a2d5f286dc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |