Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF APRIL 09, 2017 FBO #5616
SOLICITATION NOTICE

12 -- CRT-SO CONSUMABLE KIT

Notice Date
4/7/2017
 
Notice Type
Combined Synopsis/Solicitation
 
Contracting Office
SA-11B, Dunn Loring, VA 22027
 
ZIP Code
22027
 
Solicitation Number
FY17-GC-561
 
Response Due
4/12/2017
 
Archive Date
10/9/2017
 
Point of Contact
Name: Granger Cissel, Title: Supply Systems Manager, Phone: 5712269620, Fax:
 
E-Mail Address
cisselg@state.gov;
 
Small Business Set-Aside
Total Small Business
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FY17-GC-561 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 336992 with a small business size standard of 1,000.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-04-12 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Sterling, VA 20166 The Department of State requires the following items, Meet or Exceed, to the following: LI 001: Shooting Glasses, protect against debris from particle discharges while shooting. Anti-fog, anti-static, anti-scratch wraparound lenses meet ANSI Z87.1 standards. Amber lenses sharpen visual acuity. Flat temples for wear with muffs. Blocks 99.9% UV rays, 44, EA; LI 002: Hearing Protection, Silencia (Foam) box of 200 pair, 2, EA; LI 003: Arrow T-50 1/2", Staples, 8, EA; LI 004: Medical Kit,complete with M7 Med Pack.Kit must/must include the following items to be considered minimmally acceptable for use in ATA/VIP Training:1 CPR Mask; 1 disposable airway Kit; 1 Burn Sheet; 16 Adhesive bandages (1"x3"); 2 Abdominal Pads (5"x9"); 1 Trauma Dressing (12"x30"); 20 Sterile Dressings (4"x4"); 10 Sterile Dressings (3"x3"); 2 Blood Stoppers; 2 Gauze Rolls (3" NS); 2 Gauze Rolls (4"NS); 1 Waterproof Tape (1"); 1 Waterproof Tape (5"); 1 Elastic Bandage (3"); 1 Elastic Bandage (4"); 2 Triangular Bandages; 2 Cold Packs; 1 Eye Wash; 10 PVP Iodine; 1 Instrument to include shears, Kelley Forceps; bandage scissors; splinter forcepts, penlight; 1 Space Blanket; 1 No Rinse Gel; 5 pair Nitrile Gloves; 1 Maxi-Medic Bag (Nighthawk) 4 Eye Pads; 1 Petroleum Gauze (3"x9"); 2 Kerlix (4.5"); 1 BP/Stethoscope Kit; 10 Alcohol Prep Pads; 1 Antibiotic Ointment; 1 Bee Sting Kit, defibrullator and spine board [Examples-Galls Dyna Med/Blackhawk TK060 OR North American Rescue Supply];, 3, KT; LI 005: Trauma Kit, Contents must contain the following: 1 Quick Clot (Single Dose, 3.5 oz), 1 pair of EMT Sheers, 1 Asherman Chest Seal, 2 pairs Nitrile Gloves, 1 Blood Stopper, 1 Petroleum Gauze (3" x 9"), 10 Gauze Pads (5" x 9"), 2 Sanitizd Hand Wipes, 1 Nylon Carrying Pouch., 3, KT; LI 006: Pasters, White, Roll of 100, 10 of each, 1 inch, 10, EA; LI 007: Data Books and Covers, Customized Impact Data Books for CRT-S/O Course - Contained within the printing instructions. Covers to be made of durable nlon or canvas material. Stiching is double-stitched with a zipper enclosure. 6 1/8" x 9 1/8" at a minimum. Designed to hold data book, MILDOT master, slope doper, pens and markers. Two interior loops to hold accessories on the inside cover., 24, EA; LI 008: Three day assault pack - Rothco 2280,, 22, EA; LI 009: Pasters Black, Roll of 100, 10 of each, 1 inch, 10, EA; LI 010: Pasters, white, 2 inch, Roll of 100, 10 of each, 10, EA; LI 011: Pasters, black, 2 inch, Roll of 100, 10 of each, 10, EA; LI 012: Sketch Pads, 11X12, 60 lb. paper, 18, EA; LI 013: Chemlights, 6", red, 100/Box, 1, BX; LI 014: Chemlights, 6", green, 100/Box, 1, BX; LI 015: Shooting Matts, Constructed of heavy-duty 1000 denier nylon. Wide handle wrap and four buckles keep collapsed form secure. Zippered front pocket on section 5b measures 24" X 8" X 2" (61 X 20 X 5cm). Padded with 3/8" closed-cell foam, 24, EA; LI 016: Stools, hunting, heavy duty, Hunting Stool - Steel construction, Perfectly sized for your blind, Supportive backrest, Carrying weight: 6.5 lbs. Weight capacity: 300 lbs., 8, EA; LI 017: Screening, Charcoal aluminum, Phifer 60' X 100', 2, EA; LI 018: Shooter ready long range shooting CD, 8, EA; LI 019: Notebooks, Lined paper 8 1/2" X 11" (hardcover), 25, EA; LI 020: Combo kit 18v Cordless XRP li-on 4 tool combo kit DCK470L, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a Brand Name Only procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). New Equipment ONLY;NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 90 calendar days after close of Buy Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines.Information can be found at www.sam.gov. Delivery must be made within 60 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 60 - required to make delivery after it receives a purchase order from the buyer. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. The Buyer will review the bids and make a selection on FedBid. Selected Seller means the Seller that submits the Selected Bid. Selected Bid means a Bid submitted by a Seller in response to an IFB, which Bid meets or exceeds the Buyer�s requirements and is accepted by the Buyer pursuant to the terms of the Bid. Participating sellers will note that there may be a 4 to 6 week delay from the time that the Selected Seller receives notification from FedBid to the time that the Selected Seller receives the award document from the Department of State. FedBid will invoice the Selected Seller after the Buyer has accepted a Seller�s bid. The FedBid invoice will include system-generated competition-specific information for identification and referencing purposes. The Selected Seller is responsible for remitting any FedBid fee once they have received payment from the Department of State. The official award document from the Department of State will contain information on how the Selected Seller invoices the Buyer. The official award document from the Department of State will provide the delivery timeline information and the award date on the document is when the official delivery time clock begins. Sellers cannot: combine order shipments, perform drop shipments. A requisition number or credit card number MUST be identified with the shipment and All shipments MUST include the Packing List. For the line items designated as [Brand Name or Equal], the Buyer is allowing Sellers to submit bids for alternate products as long as the bid specification 'Brand Name or Equal' the requested specification. Sellers MUST enter exactly what they are bidding (including make, model, and description) into the blank description field in order for the bid to be considered. Award may NOT be based solely on pricing factors alone. Consideration may be given to non-price related factors to include delivery, history, urgency of need, as well as price. Award of bids will be evaluated by price, technical capability, delivery and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. TO HAVE A BID CONSIDERED FOR AWARD FOR BRAND NAME OR EQUAL & MEET OR EXCEED BUYS, ALL VENDORS MUST PROVIDE MANUFACTURER, PART # AND EXTENDED SPECIFICATIONS OF THE EXACT MODEL BEING PROPOSED FOR ALL LINE ITEMS. NO EXCEPTIONS. FAILURE TO PROVIDE THIS INFORMATION WILL RESULT IN A 'NON RESPONSIVE' BID AND REMOVAL FROM AWARD CONSIDERATION. The Government intends to make award to the responsive offeror that provides the Best Value to the Government based on Technical Acceptability, Price, Delivery Timeframe and Past Performance. Award will be made to the offeror quoting fair and reasonable prices who meet ALL required technical specifications and who comply with ALL solicitation requirements. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:Technical Compliance with Solicitation, Delivery and Warranty Information, Past Performance,and Price, Technical and past performance, when combined, are more important than price. The Government may increase the quantity of supplies called for in the Schedule at the unit price specified. The Contracting Officer may exercise the option by written notice to the Contractor within 90 Calendar Days of receiving final delivery. Delivery of the added items shall continue at the same rate as the like items called for under the contract, unless the parties otherwise agree
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/State/A-LM-AQM/A-LM-AQM/FY17-GC-561/listing.html)
 
Place of Performance
Address: Sterling, VA 20166
Zip Code: 20166
 
Record
SN04464565-W 20170409/170407234449-92cd8817515381de0ecdf851e0334de8 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.