MODIFICATION
16 -- F-15 Landing Gear Drag Link NSN 1620-00-365-4004 - Jennifer Wilson
- Notice Date
- 2/23/2017
- Notice Type
- Modification/Amendment
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; AFSC PZAAB2;6050 GUM LANE BLDG 1215; HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8203-17-R-0001
- Response Due
- 3/24/2017
- Archive Date
- 6/22/2017
- Point of Contact
- Benjamin M. White, Phone: 8017779355
- E-Mail Address
-
benjamin.white.17@us.af.mil
(benjamin.white.17@us.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The USAF has a current requirement for 263 units of NSN: 1620-00-365-4004 (Landing Gear Drag Link) for the F-15 weapon system. This requirement is set aside for certified small business contractors only. Due to the rigid safety requirements pertaining to any landing gear systems, only pre-approved sources that have been qualified by our engineering office may be eligible for award of this contract. If your company would like to be considered for future contracts manufacturing the same NSN in the future, please ship a Source Approval Request (SAR) package to the primary point of contact. The POC will then turn the SAR package over to the engineering department to be evaluated. This process can take up to 90 days for a vendor/contractor to become an approved source. Because of the urgent need to support the warfighter for this current requirement, no new contractors will be approved soon enough to meet our timeline to award this contract. Therefore, only currently approved sources that provide a proposal will be evaluated in response to this solicitation. All approved vendors that are interested in providing a proposal must do so NLT 28 March 2017 by 4PM MST. If you have any questions, please don't hesitate to contact the POC. PR Number(s): FD20201700357, FD20201700357 Line Item: 0001 NSN: 1620003654004LE DRAG LINK,LANDING G P/N: 68A410792-1001, Description: Landing gear brace lower end Supp. Description: 300M Steel : 0.0000 Applicable to: None PR Number(s): FD20201700357, FD20201700357 Line Item: 0001AA NSN: FATR TEST REPORT P/N: 68A410792-1001, P/N: 68A450758-1001, Description: IAW DD 1423-1 (EXHIBIT A001) Quantity: 1.0000 LO Applicable to: None PR Number(s): FD20201700357, FD20201700357 Line Item: 0001AB NSN: FA FIRST ARTICLE - SAME AS BASIC LINE ITEM ABOVE Quantity: 1.0000 EA Delivery: 01 NOV 2018 On or Before Destn: FB2029,HILL AIR FORCE BASE,UT,84056-5713. Quantity: 1.00 Unit of Issue: PR Number(s): FD20201700357, FD20201700357 Line Item: 0001AC NSN: PROD PRODUCTION ARTICLE - SAME AS BASIC LINE ITEM ABOVE Quantity: 262.0000 EA Delivery: 29 NOV 2019 On or Before Destn: SW3215,BARSTOW CA 92311-5014,06,92311-5014. Quantity: 200.00 Unit of Issue: Delivery: 29 NOV 2019 On or Before Destn: SW3210,HILL AFB UT 84056-5734,49,84056-5734. Quantity: 62.00 Unit of Issue: PR Number(s): FD20201700357, FD20201700357 Line Item: 0001AD NSN: PROD PRODUCTION ARTICLE - SAME AS BASIC LINE ITEM ABOVE Quantity: 263.0000 EA Delivery: 29 NOV 2019 On or Before Destn: SW3210,HILL AFB UT 84056-5734,49,84056-5734. Quantity: 200.00 Unit of Issue: Delivery: 29 NOV 2019 On or Before Destn: SW3215,BARSTOW CA 92311-5014,06,92311-5014. Quantity: 63.00 Unit of Issue: Electronic procedure will be used for this solicitation. First article test required. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8203-17-R-0001/listing.html)
- Record
- SN04412064-W 20170225/170223234545-79cb2e95093a92548665c86692b2b51a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |