MODIFICATION
17 -- BAK-12 Engine Mounting Upgrade Kit
- Notice Date
- 2/7/2017
- Notice Type
- Modification/Amendment
- NAICS
- 332313
— Plate Work Manufacturing
- Contracting Office
- Department of the Air Force, Pacific Air Forces, 673 CONS - Elmendorf, 10480 Sijan Ave, Elmendorf AFB, Alaska, 99506-2500, United States
- ZIP Code
- 99506-2500
- Solicitation Number
- FA5215-17-Q-9001
- Point of Contact
- Daniel P Swoyer, Phone: 317-552-5356, Robert E Bleichner II, Phone: 317-552-2237
- E-Mail Address
-
daniel.swoyer.1@us.af.mil, robert.bleichner@us.af.mil
(daniel.swoyer.1@us.af.mil, robert.bleichner@us.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Q&A Response BAK-12 ENGINE MOUNTING UPGRADE KIT. Drawing review notes: ENGINE MNT FOOT - Missing vertical dimension to slot. (The dimension should be.968 to match the slot in FWD ENGINE MOUNT) Answer: Correct, the vertical dimension should be 0.968 inches to match the slot in the FWD ENGINE MOUNT FWRD ENGINE MOUNT - No material called out on drawing. Material assumed to be A-36 steel called out on FWRD ENG. MNT ASSY. Answer: A-36 Steel is correct. - RH view: No horizontal dimension for the 3 x 10-32 holes. Answer: Horizontal dimension is 1.250 inches. - Middle view: Missing horizontal dimension for cutout. Answer: Horizontal dimension for cutout is 2.500 inches deep. FWRD ENG. MNT ASSY - Drawing is missing for FWRD ENG MNT JACK SCREW LUG. Is it the same as the JACK SCREW LUG drawing on the AFT ENG. MNT ASSY? Answer: The FWRD ENG MNT JACK SCREW LUG is item 2 on FWRD ENG MNT ASSY. AFT ENG MNT - Middle view: Missing horizontal dimension for cutout. Answer: Horizontal dimension for cutout is 2.500 inches deep. - No material called out on drawing. Material assumed to be A36 steel? Answer: Material is a-36 Steel. PEDESTAL ASSY - Assumed all parts included in the pedestal assy should be made of A-36 steel? Answer: Material is A-36 Steel. ADJUSTER BRACKET - Unclear if the adjuster bracket should be included in the PEDESTAL ASSY. Quantity? Answer: Adjuster bracket is bolted to PEDESTAL TOP Item 5 to C1 and C2. Quantity, 1 per Assembly. GAUGE PANEL ASSY - Material of parts included in the GAUGE PANEL ASSY unclear. Should all be made of A-36 steel? Answer: Material is a-36 Steel. GAUGE PANEL ITEM 2 - No call out on drawing for radius sizes. Answer: R-0.250 same as top plate pedestal assy. DECAL PLATE - Missing dimension (or angle) for the cut in the corners. Answer: Start of each cut from center of plate on 10.130 length is 2.00 inches. ANGLE BRACKET - Material? Answer: Material is a-36 Steel. - General tolerances? Answer: Fractional tolerance 3/32".
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/PAF/3CS/FA5215-17-Q-9001/listing.html)
- Place of Performance
- Address: Contractor Facility, United States
- Record
- SN04394278-W 20170209/170207235506-d011e323d4597d8f838ae5fea660b880 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |