SOURCES SOUGHT
84 -- Coveralls, Utility, Green (Shipboard - Market Research Survey
- Notice Date
- 1/31/2017
- Notice Type
- Sources Sought
- NAICS
- 314999
— All Other Miscellaneous Textile Product Mills
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Clothing & Textiles, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE1C1-17-R-XXX
- Archive Date
- 2/22/2017
- Point of Contact
- Donald Howarth,
- E-Mail Address
-
donald.howarth@dla.mil
(donald.howarth@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- Market Research Survey Please fill out and return the attached market research survey. (Coveralls, Utility (PGC 02580)) NSN(S) THIS PROCUREMENT 36S 8405014624009 36R 8405014624011 38S 8405014624017 38R 8405014624022 38L 8405014624032 40S 8405014624038 40R 8405014624039 40L 8405014624058 42S 8405014624063 42R 8405014624143 42L 8405014624294 44S 8405014624298 44R 8405014624320 44L 8405014624346 46S 8405014624361 46R 8405014624375 46L 8405014624439 48R 8405014624679 48L 8405014624906 50R 8405014624911 50L 8405014624926 52R 8405014624930 52L 8405014624960 When Product Demonstration Models are required, TWO coveralls of sample size shall be submitted. In the event that PDMs are not required two pre-production samples will be required for technical review prior to contractor beginning production. If technical operation deems it necessary, DLA Troop Support will participate in first lot inspection. Should this occur, a ten day prior notice is required. LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DSCPM 4155.3, QUALITY SYSTEMS REQUIREMENTS, NOVEMBER 3, 1997. 52.246-11 Higher-Level Contract Quality Requirement (Feb 1999) ANSI/ISO/ASQ Q9001-2008(excluding para 7.3) or equivalent. Certification or registration of a contractor's quality system or program is not required by DoD if ISO or ANSI/ASQ standards are used. GOVERNMENT LABORATORY TESTING OF COMPONENTS FOR ACCEPTANCE PURPOSE. 52.246-9030 SHADE EVALUATION OF CONTRACTOR FURNISHED MATERIALS: SHADE SAMPLING IS APPLICABLE The color of the test specimen shall match the standard sample viewed using AATCC Evaluation Procedure 9, Option A, with sources simulating artificial daylight D75 illuminant with a color temperature of 7500 (+/- 200)°K, with illumination of 100 (+/- 20) foot candles, and shall be a good match to the standard sample under incandescent lamplight at 2856 (+/- 200)°K. FOR SHADE TESTING: THE COMPLETED DD FORM 1222 AND THE SWATCHES SHALL BE FORWARDED TO: DLA Product Testing Center Analytical 700 Robbins Avenue Philadelphia, PA 19111 ATTN: BLDG 5D EMAIL: ardra.farally@dla.mil PHONE: 215-737-3210 FOR PHYSICAL (NON-SHADE) TESTING: IN ACCORDANCE WITH CLAUSE 52.246-9032, THE CONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE QAR WILL FORWARD THE COMPLETED DD FORM 1222. SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON REQUEST TO: DLA Product Testing Center Analytical 700 Robbins Avenue Philadelphia, PA 19111 ATTN: BLDG 5D EMAIL: Jessica.raushel@dla.mil PHONE: 215-737-3246 THE USE OF ELECTRONIC SUBMISSION OF DD FORM 1222 IS AUTHORIZED. NOTE: PERMIT 30 WORKING DAYS. SHADE EVALUATION OF CONTRACTOR FURNISHED The color of the test specimen shall match the standard sample viewed using AATCC Evaluation Procedure 9, Option A, with sources simulating artificial daylight D75 illuminant with a color temperature of 7500 (+/-200) °K, with illumination of 100 (+/- 20) foot candles, and shall be a good match to the standard sample under incandescent lamplight at 2856 (+/- 200) °K. 52.246-15 CERTIFICATE OF CONFORMANCE 52.209-4, 52.209-9P01, WHEN 52.210-9P06 IS NOT INCLUDED, INSERT THE FOLLOWING: "IF THE EXAMINATION INDICATES ONE OF THE FOLLOWING: WHICHEVER IS APPLICABLE: (1) NO DIMENSIONAL DEFECT IS FOUND AND NO MORE THAN 10% OF THE UNITS EXAMINED ARE FOUND TO CONTAIN MAJOR OR MINOR "A" DEFECTS, OR (2) NO DIMENSIONAL DEFECT OR SELECTED DEFECT IS FOUND NOR MORE THAN 10% OF UNITS EXAMINED ARE FOUND TO CONTAIN 3 OR 2 POINT DEFECTS, OR (3) WHEN THE CLASSIFICATION OF DEFECTS CONTAINS ONLY MAJOR OR MINOR DEFECTS OR ONE CLASS OF DEFECTS ONLY, NO DIMENSIONAL DEFECT IS FOUND NOR MORE THAN 10% OF THE UNITS EXAMINED ARE FOUND TO CONTAIN A DEFECT. INSPECTION AT SOURCE/ACCEPTANCE AT SOURCE ADDITIONAL INFORMATION FOR ASL: THE ACCEPTABLE SUPPLIER LISTING (ASL) AND QUALIFIED LABORATORY LISTING (QLL) ARE NO LONGER VALID DOCUMENTS AND WILL NOT BE PUBLISHED IN THE FUTURE. THE POINT OF CONTACT FOR QUESTIONS PERTAINING TO LABORATORIES AND SUPPLIERS IS THE PROCUREMENT BUYER, INDICATED IN THE SOLICITATION OR CONTRACT. QUESTIONS SHOULD BE PROVIDED IN WRITING TO THE DESIGNATED BUYER. CLAUSE 52.246-9032 IDENTIFICATION OF QUALIFIED LABORATORY AND SOURCE SAMPLING APPLIES. REVIEW OF THIS ITEM HAS DETERMINED THAT THE SPECIFICATIONS, STANDARDS, PRODUCT DESCRIPTIONS OR OTHER TECHNICAL DATA APPLICABLE TO THIS PROCUREMENT ACTION DO NOT REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) OR ODC(S).
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-C/SPE1C1-17-R-XXX/listing.html)
- Record
- SN04386472-W 20170202/170131234914-219d24c3447e6de9ee313f30ddfc3873 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |