Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 12, 2016 FBO #5315
SOLICITATION NOTICE

66 -- MTS Hydraulic Actuators, Hydraulic Service Manifold, and Controller Module

Notice Date
6/10/2016
 
Notice Type
Presolicitation
 
NAICS
334516 — Analytical Laboratory Instrument Manufacturing
 
Contracting Office
Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
 
ZIP Code
20899-1410
 
Solicitation Number
16-03165
 
Archive Date
7/8/2016
 
Point of Contact
Adam C. Powell, Phone: 301-975-2166, Keith Bubar, Phone: 301-975-8329
 
E-Mail Address
adam.powell@nist.gov, keith.bubar@nist.gov
(adam.powell@nist.gov, keith.bubar@nist.gov)
 
Small Business Set-Aside
N/A
 
Description
The Office of Acquisition and Agreement Management (OAAM), of the National Institute of Standards and Technology (NIST), on behalf of the Engineering Laboratory (EL), intends to negotiate on a sole-source basis with MTS Systems Corporation, under the authority of 41 US 3304(a)(1), for MTS hydraulic actuators, hydraulic service manifold, controller module, installation services, and training services. Background Information The Engineering Laboratory at the National Institute of Standards and Technology (NIST) is currently enhancing its structural testing capabilities by outfitting the strong floor laboratory in Building 226 with new hydraulic actuators, along with a new two-station hydraulic service manifold (HSM) and a new controller module to enable independent control of these actuators. A state-of-the-art Hydraulic Power Distribution and Control System (HPDCS) for this laboratory was procured in FY15 from MTS Systems. The new hydraulic actuators shall be integrated with this existing HPDCS, which is expected to provide hydraulic power and control of force and motion for the new actuators. NIST's specifications require that the required actuators, HSM, and the controller module be fully compatible with the existing HPDCS. When integrated with the existing HPDCS, the new actuators will provide the capability to perform controlled experiments on full-scale structural sub-systems and components. This facility will allow researchers to study the response of structural systems to demands resulting from progressive collapse, earthquakes, and other diverse structural loads. Research performed in this facility will help to provide the technical basis for the development and improvement of codes, standards, and practice governing the design of buildings and other structures. Sole source determination is based on the following: It has been determined that MTS Systems is the only source for required equipment and services. Consequently, the required MTS products are the only products that are 100% compatible and interchangeable with the legacy equipment and software. In addition, the legacy equipment that the required equipment will be integrated with is currently under an active warranty via the aforementioned procurement referenced in the aforementioned background section. Integration of products other than that of MTS to the legacy equipment would void the existing warranty. MTS Systems has no authorized resellers for these products/services. General Information The North American Classification System (NAICS) code for this acquisition is 334516 - Analytical Laboratory Instrument Manufacturing. The small business size standard is 1,000 employees. No solicitation package will be issued. This notice of intent is not a request for competitive quotations; however, responses received by 5:00 p.m. Eastern Time on June 23, 2016 will be considered by the Government. A determination by the Government not to compete the proposed acquisition based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Interested parties that believe they could satisfy the requirements listed above for NIST may clearly and unambiguously identify their capability to do so in writing on or before the response date for this notice. This notice of intent is not a solicitation. Any questions regarding this notice must be submitted in writing via email to Adam Powell at adam.powell@nist.gov. All responses to this notice of intent must be submitted so that they are received at adam.powell@nist.gov no later than the aforementioned due date.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/16-03165/listing.html)
 
Place of Performance
Address: National Institute of Standards and Technology, Gaithersburg, Maryland, 20899, United States
Zip Code: 20899
 
Record
SN04145394-W 20160612/160610233806-861b0ddbaeb6bb8e1198645ddad80340 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.